AMC & GM to Part-DTO — Issue 1, Amendment 1
AMC & GM to Part-DTO — Issue 1, Amendment 1
Annex IV to ED Decision 2020/005/R
Annex IV to ED Decision 2020/005/R AMC and GM to Part-DTO — Issue 1, Amendment 1 The Annex I to ED Decision 2018/009/R of 14 September 2018 is hereby amended as follows: The text of the amendment is arranged to show deleted text, new or amended text as shown below: (a) deleted text is struck through; (b) new or amended text is highlighted in blue; and (c) an ellipsis ‘[…]’ indicates that the remaining text is unchanged.
Annex IV to ED Decision 2020/005/R
AMC3 DTO.GEN.240 Training aircraft and FSTDs
EVALUATION PROCESS Two cases for the evaluation process of Annex-I aircraft are distinguished: (a) Annex-I aircraft that hold an ICAO-level certificate of airworthiness (CoA) (1) To support the evaluation process performed by the competent authority and provide the competent authority with sufficient data related to the aircraft in question, an instructor who is qualified in accordance with Annex I (Part-FCL) to Regulation (EU) No 1187/2011 and nominated by the head of training (HT) of the DTO should assess that the aircraft is appropriately equipped and suitable for the training courses provided. The result of this assessment should be submitted to the competent authority and may be included already in the application for the authorisation. (2) During the evaluation process, the competent authority should consider aircraft that hold a CoA issued in accordance with Annex 8 to the Chicago Convention to provide a level of safety comparable to that required by Annex II to the Basic Regulation, unless the competent authority determines that the airworthiness requirements used for certification of the aircraft, or the service experience, or the safety system of the State of design, do not provide for a comparable level of safety. (b) Annex-I aircraft that do not hold an ICAO-level CoA Before the inclusion of these aircraft in the fleet of an DTO and their use in training to obtain Part-FCL licences and ratings, the DTO should apply for the authorisation to the competent authority that should perform the evaluation process in the following order: (1) Initial assessment by the competent authority and criteria taken into consideration The competent authority should take into account the following criteria (non-exhaustive list): (i) national airworthiness requirements based on which the aircraft CoA was issued; (ii) aircraft similarities to a certified variant; (iii) aircraft with a satisfactory in-service experience as training aircraft; (iv) simple and conventional aircraft design; (v) aircraft that does not have hazardous design features or details, judging by experience; and (vi) operable aircraft systems, equipment, and appliances that do not require exceptional skills or strength. (2) Additional assessment by a qualified instructor To support the evaluation process performed by the competent authority and provide the competent authority with sufficient data related to the aircraft in question, after the positive initial assessment by the competent authority as per point (1), an instructor who is qualified in accordance with Part-FCL and nominated by the HT of the DTO should show
Annex IV to ED Decision 2020/005/R