31975R1598

28 . 6 . 75 Official Journal of the European Communities No L 166/ 1

I

(Acts whose publication is obligatory)

REGULATION (EEC) No 1598/75 OF THE COUNCIL

of 24 June 1975

on the advance implementation of certain provisions of the ACP-EEC Lomé convention relating to trade in goods

THE COUNCIL OF THE EUROPEAN COMMUNITIES, implementation of the common agricultural policy,

Having regard to the Treaty establishing the European Economic Community, and in particular — falling within subheading 22.09 C I of the Article 113 thereof; Common Customs Tariff,

shall be imported into the Community free of Having regard to the proposal from the Commission ; customs duties and charges having equivalent effect.

Having regard to the Opinion of the European 2. Paragraph 1 shall not prejudice application of Parliament; Article 38 of the Act of Accession .

Whereas the ACP-EEC Lomé convention between 3 . The treatment applied pursuant to paragraph 1 the African, Caribbean and Pacific States and the to products originating in the ACP States may not European Economic Community was signed on be more favourable than that applied by the Member 28 February 1975 ; States among themselves .

Whereas, when the convention was signed, the Com­ For the purposes of implementing the provisions of munity and the ACP States agreed in an exchange paragraph 1 concerning the treatment accorded by of letters to implement certain provisions of the the Member States among themselves , account shall convention relating to trade in goods autonomously not be taken of customs duties and charges having from 1 July 1975 ; equivalent effect applied pursuant to Articles 32, 36 and 59 of the Act of Accession .

Whereas it is therefore necessary to take appropriate measures to this end, Article 2

1 . Products originating in the ACP States other HAS ADOPTED THIS REGULATION : than those listed in Annex II to the Treaty, when they come under a common organization of the Article 1 market within the meaning of Article 40 of the Treaty, shall be imported into the Community free of quantitative restrictions and measures having 1 . Products originating in the States listed in equivalent effect. Annex I, hereinafter referred to as the 'ACP States', other than products : 2. Paragraph 1 shall be without prejudice to the — listed in Annex II to the Treaty when they come arrangements applied by the Community under world under a common organization of the market agreements . within the meaning of Article 40 of the Treaty, or 3 . Paragraph 1 shall be without prejudice to the — subject, on importation into the Community, to application of Protocols 6 and 7 to the Act of specific rules introduced as a result of the Accession .

No L 166/2 Official Journal of the European Communities 28 . 6 . 75

4. The treatment applied pursuant to paragraph 1 measure. The Council shall meet without delay. to products originating in the ACP States may not Acting by a qualified majority it may amend or be more favourable than that applied by the Member rescind the measure in question. States among themselves.

Article 6 Article 3 1 . Without prejudice to the application of Article 5, Nothing in Article 2 shall preclude prohibitions or the Commission may authorize a Member State to restrictions on imports, exports or goods in transit take safeguard measures to counteract the disturb­ justified on grounds of public morality, public policy ances or difficulties referred to in Article 5 . or public security, the protection of the health and life of humans, animals and plants, the protection of If the Commission receives a request from the national treasures possessing artistic, historic or Member State concerned, it shall take a decision archaeological value or the protection of industrial thereon within three working days following receipt and commercial property. Such prohibitions or of the request. restrictions shall not, however, constitute a means of arbitrary discrimination or a disguised restriction The Commission's decision shall be notified to all on trade between the ACP States and the Community. Member States .

Article 4 2. Any Member State may refer the Commission's decision to the Council within 10 working days of notification of that decision. The Council shall, The concept of 'originating products' for the meet without delay. Acting by a qualified majority, purposes of implementing this Regulation is defined it may amend or annul the decision taken by the in Annex II hereto . Commission.

3 . For the purpose of implementing this Article, Article 5 priority shall be given to such measures as would least disturb the functioning of the common market. 1 . If, as a result of applying the provisions of this Regulation, serious disturbances occur in a sector of the economy of the Community or of one or Article 7 more of its Member States, or jeopardize their external financial stability, or if difficulties arise 1 . Without prejudice to the application of Article 6, which may result in a deterioration in a sector of the Member State or States concerned may, in an the economy of a region of the Community, the emergency, introduce safeguard measures. They shall Commission, at the request of a Member State or notify the other Member States and the Commission on its own initiative, may decide to apply the of such measures forthwith. necessary safeguard measures .

2. For the purpose of implementing paragraph 1 , Using an emergency procedure the Commission shall, priority shall be given to such measures as would within five working days of the notification referred least disturb the trade relations between the ACP to in the first subparagraph, decide whether the States and the Community. These measures shall not measures are to be retained, amended or abolished. exceed the limits of what is strictly necessary to remedy the difficulties that have arisen. The Commission's decision shall be notified to all Member States. It shall be immediately enforceable. 3 . If the Commission receives a request from a Member State, within the meaning of paragraph 1 , 2. Any Member State may refer the Commission's it shall take a decision thereon within three working decision to the Council within 10 working days of days following receipt of the request. notification of that decision . The Council shall meet without delay. Acting by a qualified majority, it may amend or annul the decision taken by the Member States shall be notified of the safeguard Commission . measures, which shall apply immediately.

4. Any Member State may refer any measure taken If the matter is referred to the Council by the by the Commission to the Council within 10 working Member State which has taken the safeguard days following the day of notification of such a measures, the Commission's decision shall be

28 . 6 . 75 Official Journal of the European Communities No L 166/3

suspended. The suspension shall cease to apply of the safeguard clauses provided for in the Treaty, 30 days after the matter has been referred to the and in particular in Articles 108 and 109 thereof. Council if the latter has not by then amended or annulled the Commission's decision. Article 9

This Regulation shall enter into force on 1 July 1975 . 3 . For the purpose of applying this Article, priority must be given to such measures as would least disturb the functioning of the common market. It shall remain applicable until the entry into force of the ACP-EEC Lomé convention, and until 29 February 1976 at the latest.

Article 8 If necessary, the Council may decide that this Regulation shall remain applicable beyond that date Articles 5, 6 and 7 shall not affect application, in and until the entry into force of the ACP-EEC Lomé accordance with the procedures laid down therein, convention .

This Regulation shall be binding in its entirety and directly applicable in all Member States .

Done at Luxembourg , 24 June 1975.

For the Council

The President

G. FITZGERALD

No L 166/4 Official Journal of the European Communities 28 . 6 . 75

ANNEX I

List of States referred to in Article 1 , first subparagraph

Bahamas Liberia

Barbados Malagasy Republic

Botswana Malawi

Burundi Mali

Cameroon Mauritania

Central African Republic Mauritius

Chad Niger

People's Republic of the Congo Nigeria

Dahomey Rwanda

Equatorial Guinea Senegal

Ethiopia Sierra Leone

Fiji Somali

Gabon Sudan

Gambia Swaziland

Ghana Tanzania

Grenada Togo

Guinea Tonga

Guinea Bissau Trinidad and Tobago

Guyana Uganda

Ivory Coast Upper Volta

Jamaica Western Samoa

Kenya Zaïre Lesotho Zambia

28 . 6 . 75 Official Journal of the European Communities No L 166/5

ANNEX 11

concerning the definition of the concept of 'originating products' and methods of administrative cooperation

TITLE I considered as working or processing, nor shall a combination of such working or of such processing. Definition of the concept of 'originating products' 6. The products in List C of Annex 4 shall be temporarily excluded from the scope of this Annex.

Article 1 Article 2 1 . For the purpose of implementing the Regulation and without prejudice to paragraphs 3 and 4, the The following shall be considered as wholly obtained following products shall be considered as products either in one or more ACP States , in the Community originating in an ACP State, under the condition that or in the ' countries and territories' within the they were transported directly, within the meaning meaning of Article 1 ( 1 ) (a) and (3 ): of Article 5 : (a) mineral products extracted from their soil or (a) products wholly obtained in one or more ACP from their seabed ; States, (b) vegetable products harvested therein; (b) products obtained in one or more ACP States in (c) live animals born and raised therein; the manufacture of which products other than those referred to in (a) are used, provided that (d) products from live animals raised therein ; the said products have undergone sufficient (e) products obtained by hunting or fishing conducted working or processing within the meaning of therein ; Article 3 . (f) products of sea fishing and other products taken 2. For the purpose of implementing paragraph 1, the from the sea by their vessels ; ACP States are considered as being one territory. (g) products made aboard their factory ships exclus­ ively from products referred to in subparagraph 3 . When products wholly obtained in the Com­ (£); munity or in the countries and territories defined in Explanatory Note 9 undergo working or processing (h) used articles collected there fit only for the in one or more ACP States , they shall be considered recovery of raw materials ; as having been wholly produced in that or those (i) waste and scrap resulting from manufacturing ACP States, under the condition that the products operations conducted therein; were transported directly within the meaning of Article 5 . (j ) goods produced there exclusively from products specified in subparagraphs ( a) to (i). 4. Working and processing carried out in the Com­ munity or in the 'countries and territories', shall Article 3 be considered as having been carried out in one or more ACP States, when the final products undergo 1 . For the purpose of implementing Article 1 ( 1) working or processing in one or more ACP States, (b ) the following shall be considered as sufficient under the condition that the products were working or processing : transported directly within the meaning of Article 5. (a) working or processing as a result of which the goods obtained receive a classification under a 5 . For the purpose of implementing the previous tariff heading other than that covering each of paragraphs, and provided that all the conditions laid the products worked or processed, except, down in those paragraphs are fulfilled, the products however, working or processing specified in List obtained in one or more ACP States shall be A of Annex 2, where the special provisions of considered as products originating in the ACP State that list apply ; where the last working or processing took place. For this purpose the working or processing listed in (b) working or processing specified in List B of Article 3 (3 ) (a), (b ), (c) and (d) shall not be Annex 3 .

No L 166/6 Official Journal of the European Communities 28 . 6 . 75

'Sections', 'chapters' and 'tariff headings' shall Article 4 mean the sections, chapters and headings in the Brussels Nomenclature for the classification of goods Where Lists A and B referred to in Article 3 in customs tariffs. provide that goods obtained in an ACP State shall be considered as originating therein only if the value of the products worked or processed does not exceed 2. When, for a given product obtained, a percentage a given percentage of the value of the goods rule limits in Lists A and B the value of the materials obtained, the values to be taken into consideration and parts which can be used, the total value of these for such percentage shall be : materials and parts, whether or not they have changed tariff heading in the course of the working, — on the one hand, as regards products whose processing or assembly within the limits and under importation can be proved: their customs value the conditions laid down in each of those two lists, at the time of importation ; may not exceed, in relation to the value of the as regards products of undetermined origin : the product obtained, the value corresponding either to the common rate, if the rates are identical in both earliest ascertainable price paid for such products lists, or to the higher of the two if they are different. in the Community, the ACP State or the 'country or territory' where manufacture takes place;

— and on the other hand, the ex-works price of 3 . For the purpose of implementing Article 3 ( 1) (a) the goods obtained, less internal taxes refunded the following shall always be considered as insuf­ or refundable on exportation. ficient working or processing to confer the status or originating products, whether or not there is a change of tariff heading : Article 5 ( a) operations to ensure the preservation of merchandise in good condition during transport and storage (ventilation, spreading out, drying, 1 . For the purpose of implementing Article 1 ( 1 ), chilling, placing in salt, sulphur dioxide or other (3 ) and (4), originating products whose transport is aqueous solutions, removal of damaged parts, effected without entering into territory other than and like operations) ; that of the parties concerned are considered as transported directly from the ACP States to the (b ) simple operations consisting of removal of dust, Community or from the Community or the 'countries sifting or screening, sorting, classifying, matching and territories' to the ACP States. Originating goods (including the making-up of sets of articles), constituting one single consignment may be washing, painting, cutting up ; transported through territory other than that of the Community or the ACP States or the 'countries and (c) (i) changes of packaging and breaking up and territories', with , should the occasion arise, assembly of consignments, transhipment or temporary warehousing in such territory, provided that the crossing of the latter (ii) simple placing in bottles, flasks, bags, cases, territory is justified for geographical reasons or the boxes, fixing on cards or boards, etc., and needs of transport and that the products have not all other simple packing operations ; entered into commerce or been delivered for home use and have not undergone operations other than (d) affixing marks, labels or other like distinguishing unloading, reloading or any operation designed to signs on products or their packaging; preserve them in good condition.

(e) simple mixing of products, whether or not of Interruptions or changes in the method of transport different kinds, where one or more components due to force majeure or consequent upon conditions of the mixtures do not meet the conditions laid at sea shall not affect the application of the down in this Protocol to enable them to be preferential treatment laid down in this Annex, considered as originating either in the Com­ provided that the goods have not, during these munity, in an ACP State or in the ' countries interruptions or changes, entered into commerce or and territories'; been delivered for home use and have not undergone any operations other than those designed to preserve (f) simple assembly of parts of articles to constitute them in good condition. a complete article ;

(g) a combination of two or more operations 2. Evidence that the conditions referred to in specified in subparagraphs (a) to (f); paragraph 1 have been fulfilled shall be supplied to the responsible customs authorities in the Community (h) slaughter of animals. by the production of:

28 . 6 . 75 Official Journal of the European Communities No L 166/7

( a) a through bill of lading issued in the exporting included in the price thereof or are not separately beneficiary country covering the passage through invoiced are regarded as one with the piece of the country of transit; equipment, machine, apparatus or vehicle in question.

(b) or a certificate issued by the customs authorities Article 7 of the country of transit :

— giving an exact description of the goods, 1 . A movement certificate EUR.l shall be issued by the customs authorities of the exporting ACP State — stating the dates of unloading and re-loading when the goods to which it relates are exported. It of the goods or of their embarkation or shall be made available to the exporter as soon as disembarkation, identifying the ships used, actual exportation has been effected or ensured. — certifying the conditions under which the goods remained in the transit country; 2. In exceptional circumstances a movement certificate EUR.l may also be issued after exportation (c) or failing these, any substantiating documents. of the goods to which it relates if it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances . In this case, the certificate shall bear a special reference TITLE II to the conditions in which it was issued.

3 . A movement certificate EUR.l shall be issued Arrangements for administrative cooperation only on application having been made in writing by the exporter. Such application shall be made on a form, of which a specimen is given in Annex 5 Article 6 to this Annex, which shall be completed in accord­ ance with this Annex.

1 . Originating products within the meaning of this 4. A movement certificate EUR.l may be issued Annex shall be admitted upon importation into the only where it can serve as the documentary evidence Community to the benefits of the provisions of this required for the purpose of implementing the Regulation upon the presentation of a movement Regulation. certificate EUR.l of which a specimen is given in Annex 5, on condition that the exporting ACP State 5 . Applications for movement certificates EUR.l respects the rules laid down in this Annex or ensures must be preserved for at least three years by the that they will be respected. customs authorities of the exporting country.

However, the evidence of originating status, within Article 8 the meaning of this Annex, of products which form the subject of postal consignments (including parcels), provided that they consist only of originat­ 1 . The movement certificate EUR.l shall be issued ing products and that the value does not exceed by the customs authorities of the exporting ACP 1 000 units of account per consignment, is given State, if the goods can be considered 'originating by a form EUR.2, of which a specimen is given in products' within the meaning of this Annex. Annex 6 to this Annex. 2. For the purpose of verifying whether the conditions stated in paragraph 1 have been met, the 2. Without prejudice to Article 3 (3 ), where, at the customs authorities shall have the right to call for request of the person declaring the goods at the any documentary evidence or to carry out any check customs a dismantled or non-assembled article which they consider appropriate. falling within Chapter 84 or 85 of the Brussels Nomenclature is imported by instalments on the conditions laid down by the competent authorities, 3 . It shall be the responsibility of the customs it shall be considered to be a single article and authorities of the exporting State to ensure that the a movement certificate may be submitted for the forms referred to in Article 9 are duly completed. In particular, they shall check whether the space whole article upon importation of the first instalment. reserved for the description of the goods has been completed in such a manner as to exclude all 3 . Accessories, spare parts and tools dispatched possibility of fraudulent additions. To this end, the with a piece of equipment, machine, apparatus or description of the goods must be indicated without vehicle which are part of the normal equipment and leaving any blank lines. Where the space is not

No L 166/ 8 Official Journal of the European Communities 28 . 6 . 75

completely filled a horizontal line must be drawn 2. When the products enter territories other than below the last line of the description, the empty those of the ACP States, the Community or the space being crossed through. ' countries and territories ', the time limit laid down in paragraph 1 for the submission of the certificate is extended to 10 months . 4. The date of issue of the movement certificate must be indicated in the part of the certificate reserved for the customs authorities . Article 12

Article 9 Movement certificates EUR.1 shall be submitted to customs authorities in the importing State, in accordance with the procedures laid down by that Movement certificates EUR.1 shall be made out on State. The said authorities may require a translation the form of which a specimen is given in Annex 5 to of a certificate. They may also require the import this Annex. This form shall be printed in one or declaration to be accompanied by a statement from more of the official languages of the Community. the importer to the effect that the goods meet the Certificates shall be made out in one of these conditions required for the implementation of the languages and in accordance with the provisions Regulation. of the domestic law of the exporting State ; if they are handwritten, they shall be completed in ink and in capital letters. Article 13

Each certificate shall measure 210 X 297 mm, a 1 . A movement certificate EUR.1 which is submitted tolerance of up to plus 8 mm or minus 5 mm in the to the customs authorities of the importing State length may be allowed. The paper used must be after the final date for presentation specified in white-sized writing paper not containing mechanical Article 11 may be accepted for the purpose of pulp and weighing not less than 25 g/m2. It shall applying preferential treatment, where the failure have a printed green guilloche pattern background to submit the certificate by the final date set is due making any falsification by mechanical or chemical to reasons of force majeure or exceptional means apparent to the eye. circumstances .

The exporting States may reserve the right to print 2 . In other cases of belated presentation, the the certificates themselves or may have them printed customs authorities of the importing State may accept by approved printers . In the latter case, each the certificates where the goods have been submitted certificate must include a reference to such approval. to them before the said final date. Each certificate must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either Article 14 printed or not, by which it can be identified.

The discovery of slight discrepancies between the statements made in the movement certificate EUR.1 Article 10 and those made in the documents submitted to the customs office for the purpose of carrying out the 1 . Under the responsibility of the exporter, he or his formalities for importing the goods shall not ipso authorized representative shall request the issue of facto render the certificate nul and void if it is duly a movement certificate EUR.1 . established that the certificate does correspond to the goods submitted. 2. The exporter or his representative shall submit with his request any appropriate supporting document proving that the goods to be exported Article 15 are such as to qualify for the issue of a movement certificate EUR.1 . Form EUR.2, a specimen of which is given in Annex 6, shall be completed by the exporter. It shall be made out in one of the official languages of the Article 11 Community and in accordance with the provisions of the domestic law of the exporting State. If it is 1 . A movement certificate EUR.1 must be submitted, handwritten it must be completed in ink and in within five months of the date of issue by the capital letters. customs authorities of the exporting State, to the customs authorities of the importing State where the Form EUR.2 shall be composed of two parts, each goods are entered. part being 210 X 148 mm. The paper used shall

28 . 6 . 75 Official Journal of the European Communities No L 166/9

be white-sized writing paper not containing Regulation on condition that the goods meet the mechanical pulp and weighing not less than 64 g/m2. requirements of this Annex entitling them to be recognized as originating in an ACP State and provided that it is shown to the satisfaction of the The exporting States may reserve the right to print customs authorities that : the forms themselves or may have them printed by printers they have approved. In the latter case each (a) an exporter has consigned these goods from an form must include a reference to such approval. In ACP State to the country in which the exhibition addition, each part must bear the distinctive sign is held and has exhibited them there ; attributed to the approved printer and a serial number, either printed or not, by which it can be (b) the goods have been sold or otherwise disposed identified. of by that exporter to someone in the Com­ munity ;

A form EUR.2 shall be completed for each postal (c) the goods have been consigned during the consignment. After completing and signing the two exhibition or immediately thereafter to the Com­ parts of the form, the exporter shall, in the case munity in the state in which they were sent for of consignments by parcel post, attach the two parts exhibition; to the dispatch note. In the case of consignments by letter post, the exporter shall attach Part 1 firmly (d) the goods have not, since they were consigned to the consignment and insert Part 2 inside it. for exhibition, been used for any purpose other than demonstration at the exhibition. These provisions do not exempt exporters from complying with any other formalities required by 2. A movement certificate EUR.l must be produced customs or postal regulations. to the customs authorities in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary Article 16 evidence of the nature of the goods and the conditions under which they have been exhibited 1 . Goods sent as small packages to private persons may be required. or forming part of travellers' personal luggage shall be admitted as originating products to the benefits of the provisions of this Annex without requiring 3 . Paragraph 1 shall apply to any trade, industrial, the production of a movement certificate EUR.l or agricultural or crafts exhibition, fair or similar public the completion of a form EUR.2, provided that show or display which is not organized for private such goods are not imported by way of trade and purposes in shops or business premises with a view have been declared as meeting the conditions required to the sale of foreign goods, and during which the for the application of these provisions, and where goods remain under customs control. there is no doubt as to the veracity of such declaration.

Article 18 2. Importations which are occasional and consist solely of goods for the personal use of the recipients 1 . When a certificate is issued within the meaning of or travellers or their families shall not be considered Article 7 (2) of this Annex after the goods to which as importations by way of trade if it is evident from it relates have actually been exported, the exporter the nature and quantity of the goods that no must in the application referred to in Article 7 (3 ) commercial purpose is in view. Furthermore, the of this Annex : total value of these goods must not exceed 60 units of account in the case of small packages or 200 — indicate the place and date of exportation of units of account in the case pf the contents of the goods to which the certificate relates, travellers' personal luggage. — certify that no movement certificate EUR.l was issued at the time of exportation of the goods in Article 17 question, and state the reasons.

1 . Goods sent from an ACP State for exhibition in a country other than an ACP State, a Member State 2. The customs authorities may issue a movement or one 'country or territory' and sold after the certificate EUR.l retrospectively only after verifying exhibition for importation into the Community shall that the information supplied in the exporter's benefit on importation from the provisions of the application agrees with that in the corresponding file.

No L 166/ 10 Official Journal of the European Communities 28 . 6 . 75

Certificates issued retrospectively must be endorsed EUR.l for these products has been requested. The with one of the following phrases : 'NACHTRÄG­ second copy shall be preserved by the office which LICH AUSGESTELLT', 'DÉLIVRÉ A POSTE­ has issued it for at least three years. RIORI', 'RILASCIATO A POSTERIORI', AFGE­ GEVEN A POSTERIORI', 'ISSUED RETROSPEC­ TIVELY', 'UDSTEDT EFTERFØLGENDE'. Article 22

The ACP States shall take all necessary steps to Article 19 ensure that goods traded under cover of a movement certificate EUR.l , and which in the course of transport use a free zone situated in their territory, In the event of the theft, loss or destruction of a are not replaced by other goods and that they do not movement certificate EUR. 1, the exporter may apply undergo handling other than normal operations to the customs authorities which issued it for a designed to prevent their deterioration. duplicate made out on the basis of the export documents in their possession. The duplicate issued in this way must be endorsed with one of the Article 23 following words : 'DUPLIKAT', 'DUPLICATA', 'DUPLICATO ,' 'DUPLICAAT', 'DUPLICATE'. In order to ensure the proper application of this Title, the Member States, the 'countries and territories' and the ACP States shall assist each other, Article 20 through their respective customs administrations, in checking the authenticity of movement certificates 1 . When paragraphs 2, 3 and 4 of Article 1 are EUR.l and the accuracy of the information applied, for the issue of a movement certificate concerning the actual origin of the products EUR.l , the competent customs office in the ACP concerned and the declarations by exporters on forms EUR.2 and the authenticity and accuracy of State requested to issue the certificate for products the information certificates envisaged in Article 20. in the manufacture of which products coming from other ACP States, the Community or 'countries or territories ' are used, shall take into consideration the declaration, of which a specimen is given in Annex 7, Article 24 given by the exporter in the State, country or territory from which it came, either on the Penalties shall be imposed on any person who, in commercial invoice applicable to these products, or order to enable goods to be accepted as eligible for on a supporting document to that invoice. preferential treatment, draws up, or causes to be drawn up, either a document which contains incor­ 2 . The submission of the information certificate, rect particulars for the purpose of obtaining a move­ issued under the conditions set out in Article 21 and ment certificate EUR.l or a form EUR.2 containing of which a specimen is given in Annex 8 , may incorrect particulars . however be requested of the exporter by the customs office concerned, either for checking the authenticity and accuracy of information given on the declaration provided for in paragraph 1 , or for obtaining Article 25 additional information .

1 . Subsequent verifications of movement certificates EUR.l and of forms EUR.2 shall be carried out at Article 21 random or whenever the customs authorities of the importing State have reasonable doubt as to the authenticity of the document or the accuracy of the The information certificate concerning the products information regarding the true origin of the goods in taken into use shall be issued at the request of the question . exporter of these products, either in the circum­ stances envisaged in Article 20 (2), or at the initiative of this exporter, by the competent customs office 2. For the purpose of implementing paragraph 1 , the in the State, country or territory from which these customs authorities of the importing State shall return goods were exported. It shall be made out in the movement certificate EUR.l or Part 2 of form duplicate. One copy shall be given to the exporter EUR.2, or a photocopy thereof, to the customs who has requested it, who shall send it either to authorities of the exporting State, giving, where the exporter of the final products or to the customs appropriate, the reasons of form or substance for office where the issue of the movement certificate an inquiry. The invoice, if it has been submitted,

28 . 6 . 75 Official Journal of the European Communities No L 166/ 11

or a copy thereof shall be attached to Part 2 of storage, in bonded warehouses or in free zones, the form EUR.2 and the customs authorities shall proof of originating status within the meaning of forward any information that has been obtained this Annex is given by the submission, within four suggesting that the particulars given on the said months of that date, to the customs authorities of the certificate or the said form are inaccurate. importing State of:

If the customs authorities of the importing State (a) a movement certificate EUR.l issued decide to suspend execution of the Regulation while retrospectively by the customs authorities of the awaiting the results of the verification, they shall exporting State, or offer to release the goods to the importer subject (b) a certificate of origin issued by the competent to any precautionary measures judged necessary. authorities in that State, or 3 . The customs authorities of the importing State (c) a movement certificate of the model previously shall be informed of the results of the verification used in the context of preferential trade between, within three months . These results must be such as on the one hand, the Community and the to make it possible to determine whether the disputed African and . Malagasy States or the Republic movement certificate EUR.l or form EUR.2 applies of Tanzania, the Republic of Uganda and the to the goods actually exported, and whether these Republic of Kenya, on the other hand, or goods can, in fact, qualify for the application of the preferential arrangements. (d) for goods destined for importation into Ireland or the United Kingdom of Great Britain and Northern Ireland, a certificate of the type Article 26 previously used in the context of Commonwealth preferences. The subsequent verification of the information certificate referred to in Article 20 shall be carried out in the circumstances envisaged in Article 25 2 . The movement certificates mentioned in following a similar procedure to that envisaged in paragraph 1 (c) may continue to be used, under the that Article. conditions laid down in this Annex, until 31 December 1975 .

Article 27 3 . Until 1 July 1977, Article 1 (3 ) and (4) shall not The Council shall examine, if necessary, the be applicable in respect of products obtained in one application of the provisions of this Annex and their or more ACP States from : economic effects, with a view to making any — products of one or more Member States of the necessary changes, notably at the request of the ACP States, when the development of existing Community as originally constituted and exported industries or the creation of new industries necessi­ to one or more new Member States, or tates derogations from this Annex. — products of one or more new Member States and exported to one or more Member States of Article 28 the Community as originally constituted;

1 . For goods which conform to Title I and which, at the time of the entry into force of the Regulation where the products referred to in the two above are either being transported or being held in the indents have been the subject only of working or Community or in an ACP State in temporary processing within the meaning of Article 3 (3 ).

No L 166/ 12 Official Journal of the European Communities 28 . 6. 75

Annex 1 to Annex 11

EXPLANATORY NOTES

Note 1 — Articles 1 and 2

The terms 'one or more ACP States ', 'the Community' and 'countries and territories' shall also cover their territorial waters .

Vessels operating on the high seas , including factory ships , on which the fish caught is worked or processed shall be considered as part of the territory of the ACP States , the Community or the 'countries and territories' to which they belong, provided that they satisfy the conditions set out in Explanatory Note 6.

Note 2 — Article 1 (1 ) (b) (3 ) and (4)

In order to determine whether goods originate in one or more of the ACP States , the Community or in 'countries and territories', it shall not be necessary to establish whether the power and fuel, plant and equipment, and machines and tools used to obtain such goods originate in third countries or not .

Note 3 — Article 1

Where a percentage rule is applied in determining originating status of a product obtained in an ACP State , the value added by the working or processing referred to in Article 1 shall correspond to the ex-works price of the product obtained less the customs value of third products imported into the Community, the ACP States or the 'countries and territories'.

Note 4 — Article 3 ( 1 ) and (2) and Article 4

The percentage rule constitutes , where the product obtained appears in List A, a criterion addi­ tional to that of change of tariff heading for any non-originating product used.

Note 5 — Article 1

Packing shall be considered as forming a whole with the goods contained therein. This provision, however, shall not apply to packing which is not of the normal type for the article packed and which has intrinsic utilization value and is of a durable nature, apart from its function as packing.

Note 6

The term ' their vessels' shall apply only to vessels :

— which are registered or recorded in a Member State or an ACP State ;

— which sail under the flag of a Member State or an ACP State ;

— which are owned to an extent of at least 50 % by nationals of Member States or ACP States or by a company with its head office in one of these States, of which the manager or managers, chairman of the board of directors or of the supervisory board, and the majority of the members of such board, are nationals of these States and of which, in addition in the case of partner­ ships or limited companies, at least half the capital belongs to Members State? or to ACP States, or to public bodies or nationals of such States ;

— of which at least 50% of the crew, captain and officers included, are nationals of Member States or ACP States .

Note 7 — Article 4

'Ex-works price' shall mean the price paid to the manufacturer in whose undertaking the last working or processing is carried out, provided the price includes the value of all the products used in manufacture .

28 . 6 . 75 Official Journal of the European Communities No L 166/ 13

' Customs value' shall be understood as meaning the customs value laid down in the convention concerning the valuation of goods for customs purposes signed in Brussels on 15 December 1950.

Note 8 — Article 23

The authorities consulted shall furnish any information concerning the conditions under which the product has been made, indicating especially the conditions in which the rules of origin have been respected in the various ACP States , Member States or 'countries and territories' concerned.

Note 9 — Article 1 (3 )

Within the meaning of Annex II 'countries and territories' shall mean the countries and territories referred to in Part 4 of the Treaty establishing the European Economic Community and in Article 24 of the Act of Accession .

No L 166/14 Official Journal of the European Communities 28 . 6 . 75

Annex 2 to Annex 11

LIST A

List of working or processing operations which result in a change of tariff heading without conferring the status of 'originating products' on the products undergoing such operations, or conferring this status only subject to certain conditions

Products obtained Working or processing that does not "Working or processing that confers the status of originating products when the CCT confer the status of originating products following conditions are met heading Description No

02.06 Meat and edible meat offals Salting, placing in brine, drying (except poultry liver), salted, in or smoking of meat and edible brine, dried or smoked meat offals of heading Nos 02.01 and 02.04

03.02 Fish, dried, salted or in brine, Drying, salting, placing in brine ; smoked fish, whether or not smoking of fish, whether cooked cooked before or during the or not smoking process

04.02 Milk and cream, preserved, Preserving, concentrating, or concentrated or sweetened adding sugar to milk or cream of heading No 04.01

04.03 Butter Manufacture from milk or cream

04.04 Cheese and curd Manufacture from products of heading Nos 04.01 , 04.02 and 04.03

07.02 Vegetables (whether or not Freezing of vegetables cooked), preserved by freezing

07.03 Vegetables, provisionally pre­ Placing in brine or in other served in brine, in sulphur water solutions of vegetables of heading or in other preservative sol­ No 07.01 utions, but not specially prepared for immediate consumption

07.04 Dried, dehydrated or evaporated Drying, dehydration, evaporation vegetables, whole, cut, sliced, cutting, grinding, powdering of broken or in powder, but not vegetables of heading Nos 07.01 further prepared to 07.03

08.10 Fruit (whether or not cooked), Freezing of fruit preserved by freezing, not containing added sugar

08.11 Fruit provisionally preserved (for Placing in brine or in other example, by sulphur dioxide gas, solutions of fruit of heading Nos in brine, in sulphur water or in 08.01 to 08.09 other preservative solutions), but unsuitable in that state for immediate consumption

28 . 6 . 75 Official Journal of the European Communities No 1 , 166/15

Products obtained "Working or processing that confers the Working or processing that does not confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

08.12 Fruit, dried, other than that Drying of fruit falling within heading No 08.01 , 08.02, 08.03, 08.04 or 08.05

11.01 Cereal flours Manufacture from cereals l

11.02 Cereal groats and cereal meal ; Manufacture from cereals other worked cereal grains (for example, rolled, flaked, polished, pearled or kibbled, but not further prepared ), except husked, glazed, polished or broken rice; germ of cereals, whole, rolled, flaked or ground

11.03 Flours of the leguminous Manufacture from dried legumin­ vegetables falling within heading ous vegetables No 07.05

11.04 Flours of the fruits falling within Manufacture from fruits of any heading in Chapter 8 Chapter 8

11.05 Flour, meal and flakes of potato Manufacture from potatoes

11.06 Flour and meal of sago and of Manufacture from products of manioc, arrowroot, salep and heading No 07.06 other roots and tubers falling within heading No 07.06

11.07 Malt, roasted or not Manufacture from cereals

11.08 Starches ; inulin Manufacture from cereals of Chapter 10, or from potatoes or other products of Chapter 7

11.09 Wheat gluten, whether or not Manufacture from wheat or dried wheat flours

15.01 Lard, other pig fat and poultry Manufacture from products of fat, rendered or solvent-extracted heading No 02.05

15.02 Fats of bovine cattle, sheep or Manufacture from products of goats, unrendered ; rendered or heading Nos 02.01 and 02.06 solvent-extracted fats (including 'premier jus') obtained from those unrendered fats

15.04 Fats and oils, of fish and marine Manufacture from fish or marine mammals, whether or not mammals caught by fishing refined vessels of third countries

15.06 Other animal oils and fats Manufacture from products of (including neat's-foot oil and Chapter 2 fats from bones or waste)

No L 166/16 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

CX 15.07 Fixed vegetable oils, fluid or Manufacture from products of solid, crude, refined or purified, Chapters 7 and 12 but not including Chinawood oil, myrtlewax, Japan wax or oil of tung nuts, oleococca seeds or oiticia seeds ; also not including oils of a kind used in machinery or mechanical appliances or for industrial purposes other than the manufacture of edible products

16.01 Sausages and the like, of meat, Manufacture from products of meat offal or animal blood Chapter 2

16.02 Other prepared or preserved meat Manufacture from products of or meat offal Chapter 2

16.04 Prepared or preserved fish, Manufacture from products of including caviar and caviar Chapter 3 substitutes

16.05 Crustaceans and molluscs, Manufacture from products of prepared or preserved Chapter 3

17.02 Other sugars ; sugar syrups ; Manufacture from any product artificial honey (whether or not mixed with natural honey); caramel

17.04 Sugar confectionery, not con­ Manufacture from other products taining cocoa of Chapter 17 the value of which exceeds 30% of the value of the finished product

17.05 Flavoured or coloured sugars, Manufacture from other products syrups and molasses, but not of Chapter 17 the value of which including fruit juices containing exceeds 30% of the value of the added sugar in any proportion finished product

18.06 Chocolate and other food Manufacture from products of preparations containing cocoa Chapter 17 the value of which exceeds 30% of the value of the finished product

19.01 Malt extract Manufacture from products of heading No 11.07

19.02 Preparations of flour, meal, Manufacture from cereals and starch or malt extract, of a kind derivatives thereof, meat and used as infant food or for milk, or in which the value of dietetic or culinary purposes, con­ products of Chapter 17 used taining less than 50% by weight exceeds 30% of the value of the of cocoa finished product

19.03 Macaroni, spaghetti and similar Manufacture from durum wheat products

28 . 6 . 75 Official Journal of the European Communities No L 166/17

Products obtained Working or processing that does not Working or processing that confers the CCT confer the status of originating products status of originating products when the following conditions are met heading Description No

19.04 Tapioca and sago ; tapioca and Manufacture from potato starch sago substitutes from potato or other starches

19.05 Prepared foods obtained by the Manufacture from any product swelling or roasting of cereals or other than of Chapter 17 (*) or cereal products (puffed rice, in which the value of the cornflakes and similar products) products of Chapter 17 used exceeds 30% of the value of the finished product

19.06 Communion wafers, empty Manufacture from products of cachets of a kind suitable for Chapter 11 pharmaceutical use, sealing wafers, rice paper, and similar products

19.07 Manufacture from products of Bread, ships' biscuits and other ordinary bakers ' wares, not con­ Chapter 11 taining added sugar, honey, eggs, fats, cheese or fruit

19.08 Pastry, biscuits, cakes and other Manufacture from products of fine bakers' wares, whether or Chapter 11 not containing cocoa in any proportion

20.01 Vegetables and fruit prepared or Preserving vegetables, fresh or preserved by vinegar or acetic frozen or preserved temporarily acid, with or without sugar, or preserved in vinegar whether or not containing salt, spices or mustard

20.02 Vegetables prepared or preserved Preserving vegetables fresh or otherwise than by vinegar or frozen acetic acid

20.03 Fruit preserved by freezing, con­ Manufacture from products of taining added sugar Chapter 17 of which the value exceeds 30% of the value of the finished product

20.04 Fruits, fruit-peel and parts of Manufacture from products of plants, preserved by sugar Chapter 17 of which the value (drained, glace or crystallized) exeeds 30% of the value of the finished product

ex 20.05 Jams, fruit jellies, marmalades, Manufacture from products of fruit purees and fruit pastes, being Chapter 17 of which the value cooked preparations, containing exceeds 30% of the value of the added sugar finished product

20.06 Fruit otherwise prepared or preserved whether or not con­ taining added sugar or spirit :

( ) This rule docs not apply where the use of maize of the 'zea indurata' type or 'durum wheat' is concerned.

No L 166/ 18 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that confers the Working or processing that does not confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

20.06 A. Nuts Manufacture, without added (cont'd) sugar or spirit, in which the value of the constituent 'originating products' of heading Nos 08.01 , 08.05 and 12.01 , represents at least 60% of the value of the manufactured product

B. Other fruits Manufactured from products of Chapter 17 of which the value exceeds 30% of the value of the finished product

ex 20.07 Fruit juices (including grape Manufacture from products of must), whether or not containing Chapter 17 of which the value added sugar, but unfermented and exceeds 30% of the value of the not containing spirit finished product

ex 21.01 Roasted chicory and extracts Manufacture from chicory roots, thereof fresh or dried

21.05 Soups and broths in liquid, solid Manufacture from products of or powder forms ; homogenized heading No 20.02 food preparations

22.02 Lemonade, flavoured spa waters Manufacture from fruit juices (1 ) and flavoured aerated waters, and or in which the value of products other non-alcoholic beverages, not of Chapter 17 used exceeds 30% including fruit and vegetable of the value of the finished juices falling within heading No product 20.07

22.06 Vermouths, and other wines of Manufacture from products of fresh grapes flavoured with heading No 08.04, 20.07, 22.04 or aromatic extracts 22.05

22.08 Ethyl alcohol or neutral spirits, Manufacture from products of undenatured, of a strength of heading No 08.04, 20.07, 22.04 or ' 80° or higher ; denatured spirits 22.05 (including ethyl alcohol and neutral spirits) of any strength

22.09 Spirits (other than those of Manufacture from products of heading No 22.08 ); liqueurs and heading No 08.04, 20.07, 22.04 or other spirituous beverages ; com­ 22.05 pound alcoholic preparations ( known as ' concentrated extracts') for the manufacture of beverages

22.10 Vinegar and substitutes for vinegar Manufacture from products of heading No 08.04, 20.07, 22.04 or 22.05

(x) This rule docs not apply where fruit juices of pineapple, Ume and grapefruit are concerned.

28 . 6 . 75 Official Journal of the European Communities No L 166 / 19

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

ex 23.03 Residues from the manufacture of Manufacture from maize or maize flour maize starch (excluding concen­ trated steeping liquours), of a protein content, calculated on the dry product, exceeding 40% dry weight

23.04 Oil cake and other residues Manufacture from various (except dregs) resulting from the products extraction of vegetable oils

23.07 Sweetened forage ; other Manufacture from cereals and preparations of a kind used in derived products, meat, milk, animal feeding sugar and molasses

ex 24.02 Cigarettes, cigars, smoking Manufacture from products of tobacco heading No 24.01 of which at least 70 °/o by quantity are 'origi­ nating products'

ex 28.38 Aluminium sulphate Manufacture in which the value of the products used does not exceed 50% of the value of the finished product

30.03 Medicaments (including veterin­ Manufacture in which the value ary medicaments) of the products used does not exceed 50% of the value of the finished product

31.05 Other fertilizers ; goods of the Manufacture in which the value present Chapter in tablets, of the products used does not lozenges and similar prepared exceed 50% of the value of the forms or in packings of a gross finished product weight not exceeding 10 kg

32.06 Colour lakes Manufacture from materials of heading No 32.04 or 32.05 ( J )

32.07 Other colouring matter; inor­ Mixing of oxides or salts of ganic products of a kind used as Chapter 28 with extenders such luminophores as barium sulphate, chalk barium carbonate and satin white (*)

33.05 Aqueous distillates and aqueous Manufacture from products of solutions of essential oils, heading No 33.01 (J ) including such products suitable for medicinal uses

35.05 Dextrins and dextrin glues ; Manufacture from maize or soluble or roasted starches ; starch potatoes glues

t1) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

No L 166/20 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that confers the Working or processing that does not confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

37.01 Photographic plates and film in Manufacture from products of the flat, sensitized, unexposed, of heading No 37.02 (*) any material other than paper, paperboard or cloth

37.02 Film in rolls, sensitized, unex­ Manufacture from products of posed, perforated or not heading No 37.01 (*)

37.04 Sensitized plates and film, Manufacture from products of exposed but not developed, heading No 37.01 or 37.02 (4) negative or positive

Manufacture in which the value 38.11 Disinfectants, insecticides, fungi­ cides, weed-killers, anti-sprouting of the products used does not exceed 50% of the value of the products, rat poisons and simi­ lar products, put up in forms or finished product packings for sale by retail or as preparations or as articles (for example, sulphur-treated bands, wicks and candles, fly-papers)

38.12 Manufacture in which the value Prepared glazings, prepared dressings and prepared mordants, of the products used does not exceed 50% of the value of the of a kind used in the textile, paper, leather or like industries finished product

38.13 Manufacture in which the value Pickling preparations for metal surfaces ; fluxes and other of the products used does not exceed 50% of the value of the auxiliary preparations for soldering, brazing or welding ; finished product soldering, brazing or welding powders and pastes consisting of metal and other materials ; pre­ parations of a kind used as cores or coatings for welding rods and electrodes

ex 38.14 Manufacture in which the value Anti-knock preparations, oxi­ dation inhibitors, gum inhibitors, of the products used does not exceed 50% of the value of the viscosity improvers, anti-corrosive preparations and similar prepared finished product additives for mineral oils, excluding prepared additives for lubricants

38.15 Manufacture in which the value Prepared rubber accelerators of the products used does not exceed 50% of the value of the finished product

(*) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

28 . 6.75 Official Journal of the European Communities No L 166/21

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No i 38.17 Preparations and charges for Manufacture in which the value fire-extinguishers ; charged fire­ of the products used does not extinguishing grenades exceed 50% of the value of the finished product

38.18 Composite solvents and thinners Manufacture in which the value for varnishes and similar products of the products used does not exceed 50% of the value of the finished product

Manufacture in which the value ex 38.19 Chemical products and prepara­ tions of the chemical or allied of the products used does not exceed 50% of the value of the industries (including those con­ sisting of mixtures of natural finished product products ), not elsewhere specified or included ; residual products of the chemical or allied industries, not elsewhere specified or included, excluding :

— Fusel oil and Dippel's oil ;

— Naphthenic acids and their non-water-soluble salts, esters of naphthenic acids ;

— Sulphonaphthenic acids and their non-water-soluble salts ; esters of sulphonaphthenic acids ;

— Petroleum sulphonates, exclud­ ing petroleum sulphonates of alkali metals, of ammonium or of ethanolamines, thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts ;

— Mixed alkylbenzenes and mixed alkylnaphthalenes ;

— Ion exchangers ;

— Catalysts ;

— Getters for vacuum tubes ;

— Refractory cements or mortars and similar preparations;

— Alkaline iron oxide for the purification of gas ;

— Carbon (excluding that in artificial graphite of heading No 38.01 ) of metallo-graphite or other compounds, in the form of small plates, bars or other semi-manufactures

No L 166/22 Official Journal of the European Communities 28 . 6. 75

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

ex 39.02 Polymerization products Manufacture in which the value of the products used does not exceed 50 °/o of the value of the finished product

39.07 Articles of materials of the kinds Manufacture in which the value described in heading Nos 39.01 of the products used does not to 39.06 exceed 50°/o of the value of the finished product

40.05 Plates, sheets and strip, of Manufacture in which the value unvulcanized natural or synthetic of the products used does not rubber, other than smoked sheets exceed 50% of the value of the and crepe sheets of heading finished product No 40.01 or 40.02 ; granules of unvulcanized natural or synthetic rubber compounded ready for vulcanization ; unvulcanized natural or synthetic rubber, com­ pounded before or after coagul­ ation either with carbon black (with or without the addition of mineral oil ) or with silica (with or without the addition of mineral oil ), in any form, of a kind known as masterbatch

41.08 Patent leather and imitation Varnishing or metallizing of patent leather; metallized leather leather of heading Nos 41.02 to 41.07 (other than skin leather of crossed Indian sheep and of Indian goat or kid, not further prepared than vegetable tanned, or if otherwise prepared obviously unsuitable for immediate use in the manufacture of leather articles) in which the value of the skin leather used does not exceed 50°/o of the value of the finished product

43.03 Articles of furskin Making up from furskin in plates , crosses and similar forms (heading No ex 43.02) (»)

44.21 Complete wooden packing cases, Manufacture from boards not cut boxes, crates, drums and similar to size packings

45.03 Articles of natural cork Manufacture from products of heading No 45.01

( ) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

28 . 6 . 75 Official Journal of the European Communities No L 166/23

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the CCT confer the status of originating products following conditions are met heading Description No

48.06 Paper and paperboard,' ruled, Manufacture from paper pulp lined or squared, but not other­ wise printed, in rolls or sheets

48.14 Writing blocks, envelopes, letter Manufacture in which the value cards, plain postcards, correspon­ of the products used does not dence cards ; boxes, pouches, exceed 50% of the value of the wallets and writing compendiums, finished product of paper or paperboard , con­ taining only an assortment of paper stationery

48.15 Other paper and paperboard, cut Manufacture from paper pulp to size or shape I

48.16 Boxes, bags and other packing Manufacture in which the value containers, of paper or paper­ of the products used does not board exceed 50% of the value of the finished product

49.09 Picture postcards, Christmas and Manufacture from products of other picture greeting cards, heading No 49.11 printed by any process, with or without trimmings

49.10 Calendars of any kind, of paper Manufacture from products of or paperboard, including calendar heading No 49.11 blocks

50.04 (1 ) Silk yarn, other than yarn of noil Manufacture from products other or other waste silk, not put up than those of heading No 50.04 for retail sale

50.050 Yarn spun from silk waste other Manufacture from products of than noil, not put up for retail heading No 50.03 sale

50.060) Yarn spun from noil silk, not put Manufacture from products of up for retail sale heading No 50.03

50.07 (1) Silk yarn and yarn spun from noil Manufacture from products of or other waste silk, put up for heading Nos 50.01 to 50.03 retail sale

ex 50.08 (x) Imitation catgut of silk Manufacture from products of heading No 50.01 or from products of heading No 50.03 neither carded nor combed

r) For yarn composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated .

No L 166 /24 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

50.090 Woven fabrics of silk or of waste Manufacture from products of silk other than noil heading No 50.02 or 50.03

50.10O Woven fabrics of noil silk Manufacture from products of heading No 50.02 or 50.03

51.01 (2) Yarn of man-made fibres Manufacture from chemical (continuous), not put up for products or textile pulp retail sale

Monofil, strip (artificial straw and Manufacture from chemical 51.02 (2) the like) and imitation catgut, of products or textile pulp man-made fibre materials

Yarn of man-made fibres Manufacture from chemical 51.03 (2) ( continuous), put up for retail products or textile pulp sale

Woven fabrics of man-made Manufacture from chemical 51.040 ) fibres ( continuous ), including products or textile pulp woven fabrics of monofil or strip of heading No 51.01 or 51.02

52.01 (2) Metallized yarn, being textile Manufacture from chemical yarn spun with metal or covered products, from textile pulp or with metal by any process from natural textile fibres, discontinuous man-made fibres or their waste, neither carded nor combed

52.02 (t ) Woven fabrics of metal thread or Manufacture from chemical of metallized yarn, of a kind used products, from textile pulp or in articles of apparel, as furnishing from natural textile fibres, fabrics or the like discontinuous man-made fibres or their waste

53.06 (2) Yarn of carded sheep's or Manufacture from products of lambs' wool ( woollen yarn), not heading No 53.01 or 53.03 put up for retail sale

53.07 (2) Yarn of combed sheep's or Manufacture from products of lambs ' wool (worsted yarn ), not heading No 53.01 or 53.03 put up for retail sale

r) For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10% of the total weight of textile materials incorporated. This percentage shall be increased : (i) to 20% where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within heading Nos ex 51.01 and ex 58.07 ; (ii) to 30% where the material in question is yarn of a width not exceeding 5 ram formed of a core consisting either of a thin strip of aluminium or of a Sim of artificial plastic nuterial wither or nor covers i »vith iluniniu.n po^visr, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material. (l) For yarn composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated.

No L 166/25 28 . 6 . 75 Official Journal of the European Communities

Products obtained Working or processing that does not Working or processing that confers the status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

Manufacture from raw fine 53.080 Yarn of fine animal hair ( carded or combed), not put up for retail animal hair of heading No 53.02 sale

Yarn of horsehair or of other Manufacture from raw coarse 53.090) coarse animal hair, not put up for animal hair of heading No 53.02 retail sale or from raw horsehair of heading No 05.03

Manufacture from materials of 53 . 100 Yarn of sheep's or lambs' wool, of horsehair or of other animal hair heading Nos 05.03 and 53.01 to 53.04 (fine or coarse), put up for retail sale

Manufacture from materials of 53.11 (2) Woven fabrics of sheep 's or lambs' wool or of fine animal heading Nos 53.01 to 53.05 hair

53.12 (2) Woven fabrics of coarse animal Manufacture from products of hair other than horsehair heading Nos 53.02 to 53.05

Woven fabrics of horsehair Manufacture from horsehair of 53.13 (2). heading No 05.03

54.030 Flax or ramie yarn, not put up Manufacture either from products for retail sale of heading No 54.01 neither carded nor combed or from products of heading No 54.02

54.040 Flax or ramie yarn, put up for Manufacture from materials of retail sale heading No 54.01 or 54.02

Woven fabrics of flax or of ramie Manufacture from materials of 54.05O heading No 54.01 or 54.02

Manufacture from materials of 55.050 Cotton yarn, not put up for retail sale heading No 55.01 or 55.03

Manufacture from materials of 55.060 Cotton yarn, put up for retail sale heading No 55.01 or 55.03

Manufacture from materials of 55.070 Cotton gauze heading No 55.01 , 55.03 or 55.04

55.080 Terry towelling and similar Manufacture from materials of terry fabrics, of cotton heading No 55.01, 55.03 or 55.04

55.09 (2) Other woven fabrics of cotton Manufacture from materials of heading No 55.01 , 55.03 or 55.04

(l) For yarn composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. (®) For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10% of the total weight of textile materials incorporated. This percentage shall be increased : (i) to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07 ; (ii) to 30 Vo where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.

No L 166/26 Official Journal of the European Communities 28 . 6. 75

Products obtained Working or processing that confers the ■Working or processing that does not status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

56.01 Manufacture from chemical Man-made fibres (discontinuous), not carded, combed or otherwise products or textile pulp prepared for spinning

56.02 Continuous filament tow for the Manufacture from chemical manufacture of man-made fibres products or textile pulp (discontinuous)

56.03 Manufacture from chemical "Waste (including yarn waste and pulled or garnetted rags) of man­ products or textile pulp made fibres (continuous or discontinuous), not carded, combed or otherwise prepared for spinning

56.04 Manufacture from chemical Man-made fibres (discontinuous or waste), carded, combed or products or textile pulp otherwise prepared for spinning

Manufacture from chemical 56.050 Yarn of man-made fibres (discon­ tinuous or waste ), not put up for products or textile pulp retail sale

56.06 (1) Yarn of man-made fibres (discon­ Manufacture from chemical tinuous or waste), put up for products or textile pulp retail sale

56.07 (2) Woven fabrics of man-made Manufacture from products of fibres (discontinuous or waste) heading Nos 56.01 to 56.03

57.050 Yarn of true hemp Manufacture from raw true hemp

57.06 (x) Yarn of jute or of other textile Manufacture from raw jute, jute bast fibres of heading No 57.03 tow or from other raw textile bast fibres of heading No 57.03

57.07 (1) Yarn of other vegetable textile Manufacture from raw vegetable fibres textile fibres of heading No 57.02 or 57.04

(l) For yarn composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. > (a) For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10% of the total weight of textile materials incorporated. This percentage shall be increased : (i) to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07 ; (ii) to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material .

28 . 6. 75 Official Jouinnal of the European Communities No L 166/27

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

57.08 Paper yarn Manufacture from products of Chapter 47, from chemical products, textile pulp or from natural textile fibres discontinuous man-made fibres or their waste, neither carded nor combed

57.09 Woven fabrics of true hemp Manufacture from products of heading No 57.01

57.10 (1) Woven fabrics of jute or of other Manufacture from raw jute, jute textile bast fabrics of heading tow or from other raw textile bast No 57.03 fibres of heading No 57.03

Woven fabrics of other vegetable Manufacture from materials of 57.11 (] ) textile fibres heading No 57.02 or 57.04 or from coir yarn of heading No 57.07

57.12 Woven fabrics of paper yarn Manufacture from paper, from chemical products, textile pulp or from natural textile ' fibres, discontinuous man-made fibres or their waste

Carpets, carpeting and rugs, Manufacture from materials of 58.01 (2) knotted (made up or not) heading Nos 50.01 to 50.03, 51.01 , 53.01 to 53.05, 54.01 , 55.01 to 55.04, 56.01 to 56.03 or 57.01 to 57.04

Other carpets, carpeting, rugs, Manufacture from materials of 58.02 (2) mats and matting, and 'Kelem', heading Nos 50.01 to 50.03, ' Schumacks' and ' Karamanie' 51.01 , 53.01 to 53.05, 54.01 , 55.01 rugs and the like (made up or not) to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from coir yarn of heading No 57.07

58.04 (2) Woven pile fabrics and chenille Manufacture from materials of fabrics (other than terry towelling heading Nos 50.01 to 50.03, or similar terry fabrics of cotton 53.01 to 53.05 , 54.01 , 55.01 to of heading No 55.08 and 55.04, 56.01 to 56.03 , 57.01 to fabrics of heading No 58.05) 57.04 or from chemical products or textile pulp

(*) For fabrics composed of two or more textile materials, the conditions shown in this list mast also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased : (i) to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped , falling within heading Nos ex 51.01 and ex 58.07 ; (ii) to 30% where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material . (2) For products composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified. This rule, however, doss not apply to any one or more mixed textile materials whose weight does not exceed 10% of the total weight of textile miteriats incorporated . This percentage shall be increased : (i) to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within heading Nos ex 51.01 and ex 58.07 ; (ii) to 30 % where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.

No L 166/28 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that does notl Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

58.05H Narrow woven fabrics, and Manufacture from materials of narrow fabrics (bolduc) consisting heading Nos 50.01 to 50.03, of warp without weft assembled 53.01 to 53.05 , 54.01 , 55.01 to by means of an adhesive, other 55.04, 56.01 to 56.03 or 57.01 to than goods falling within heading 57.04 or from chemical products No 58.06 or textile pulp

58.06H Woven labels, badges and the Manufacture from materials of like, not embroidered, in the heading Nos 50.01 to 50.03, piece, in strips or cut to shape or 53.01 to 53.05, 54.01 , 55.01 to size 55.04, 56.01 to 56.03 or from chemical products or textile pulp

58.07H Chenille yarn (including flock Manufacture from materials of chenille yarn), gimped yarn (other heading Nos 50.01 to 50.03 , than metallized yarn of heading 53.01 to 53.05 , 54.01 , 55.01 to No 52.01 and gimped horsehair 55.04, 56.01 to 56.03 or from yarn); braids and ornamental chemical products or textile pulp trimmings in the piece ; tassels, pompons and the like

58.08H Tulle and other net fabrics (but Manufacture from materials of not including woven, knitted or heading Nos 50.01 to 50.03, crocheted fabrics), plain 53.01 to 53.05, 54.01 , 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp

58.09 (1 ) Manufacture from materials of Tulle and other net fabrics (but not including woven, knitted or heading Nos 50.01 to 50.03 , crocheted fabrics), figured ; hand 53.01 to 53.05, 54.01 , 55.01 to or mechanically made lace, in 55.04, 56.01 to 56.03 or from the piece, in strips or in motifs chemical products or textile pulp

58.10 Manufacture in which the value Embroidery, in the piece, in strips or in motifs of the product used does not exceed 50% of the value of finished product

59.01 (*) Manufacture either from natural Wadding and articles of wadding ; textile flock and dust and mill fibres or from chemical products neps or textile pulp

59.02H Felt and articles of felt whether Manufacture either from natural or not impregnated fibres or from chemical products or textiles pulp

ex 59.02 (1) Needled felt, whether or not Manufacture from fibre or impregnated or coated continuous polypropylene filament of which the denomination of the filaments is less than 8 denier and of which the value does not exceed 40% of the value of the finished product

(') For products composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which procucts of the other textile materials of which the mixed product is composed would be classified . This rule, however, does not apply to any one or more mixed textile materials whose weight does not exeed 10°/o or the total weight of textile materials incorporated . This percentage shall be increased : (i) to 20% where the product in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within heading Nos ex 51.01 and ex 58.07 ; (ii) to 30 °/o where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of alumi­ nium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.

28 . 6 . 75 Official Journal of the European Communities No L 166/29

Products obtained ■Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

Bonded fibre fabrics, similar Manufacture either from natural 59.030 ) bonded yarn fabrics, and articles fibres or from chemical products of such fabrics, whether or not or textile pulp impregnated or coated

59.040 ) Twine, cordage, ropes and cables, Manufacture either from natural plaited or not fibres or from chemical products or textile pulp or from coir yarn of heading No 57.07

59.050 ) Nets and netting made of twine, Manufacture either from natural cordage or rope, and made up fibres or from chemical products fishing nets of yarn, twine, or textile pulp or from coir yarn cordage or rope of heading No 57.07

59.060) Other articles made from yarn, Manufacture either from natural twine, cordage, rope or cables, fibres or from chemical products other than textile fabrics and or textile pulp or from coir yarn articles made from such fabrics of heading No 57.07

59.07 Textile fabrics coated with gum Manufacture from yarn or amylaceous substances of a kind used for the outer covers of books and the like ; tracing cloth; prepared painting canvas ; buck­ ram and similar fabrics for hat foundations and similar uses

59.08 Textile fabrics impregnated, Manufacture from yarn coated, covered or laminated with preparations of cellulose deriva­ tives or of other artificial plastic materials

59.09 Textile fabrics coated or impreg­ Manufacture from yarn nated with oil or preparations with a basis of drying oil

59.100 ) Linoleum and materials prepared Manufacture either from yarn or on a textile base in a similar from textile fibres manner to linoleum, whether or not cut to shape or of a kind used as floor coverings ; floor coverings consisting of a coating applied on a textile base, cut to shape or not

(*) For products composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified . This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10% of the total weight of textile materials incorporated. This percentage shall be increased : (i) to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within heading Nos ex 51.01 and ex 58.07 ; (ii) to 30% where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium orof a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.

No L 166/30 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

59.11 Rubberized textile fabrics, other Manufacture from yarn than rubberized knitted or crocheted goods

59.12 Textile fabrics otherwise impreg­ Manufacture from yarn nated or coated ; painted canvas being theatrical scenery, studio backcloths or the like

59.130 Elastic fabrics and trimmings Manufacture from single yarn (other than knitted or crocheted goods) consisting of textile materials combined with rubber threads

Textile hosepiping and similar Manufacture from materials of 59.15 ( l) tubing, with or without lining, heading Nos 50.01 to 50.03, armour or accessories of other 53.01 to 53.05, 54.01 , 55.01 to materials 55.04, 56.01 to 56.03 or 57.01 to 57.04 or from chemical products or textile pulp

59.160 Transmission, conveyor or Manufacture from materials of elevator belts or belting, of textile heading Nos 50.01 to 50.03 , material, whether or not 53.01 to 53.05, 54.01 , 55.01 to strengthened with metal or other 55.04, 56.01 to 56.03 or 57.01 to material r 57.04 or from chemical products or textile pulp

59.170 Textile fabrics and textile Manufacture from materials of articles, of a kind commonly used heading Nos 50.01 to 50.03, in machinery or plant 53.01 to 53.05, 54.01 , 55.01 to 55.04, 56.01 to 56.03 or 57.01 to 57.04 or from chemical products or textile pulp

ex Chap­ Knitted and crocheted goods, Manufacture from natural fibres, ter 60 0 excluding knitted or crocheted carded or combed, from materials goods obtained by sewing or by of heading Nos 56.01 to 56.03, the assembly of pieces of knitted from chemical products or textile or crocheted goods (cut or pulp obtained directly to shape)

ex 60.02 Gloves, mittens and mitts, knitted Manufacture from yarn (2) or crocheted, not elastic of rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)

f1) For products composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : (i) to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within heading Nos ex 51.01 and ex 58.07 ; (ii) to 30% where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material. (2) Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

28 . 6 . 75 Official Journal of the European Communities No L 166/31

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

ex 60.03 Stockings, under stockings, socks, Manufacture from yarn (*) anklesocks, sockettes and the like, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted -goods (cut or obtained directly to shape)

ex 60.04 Under garments, knitted or cro­ Manufacture from yarn (x ) cheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)

ex 60.05 Outer garments and other Manufacture from yarn (T ) articles, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods ( cut or obtained directly to shape)

ex 60.06 Other articles, knitted or Manufacture from yarn (x) crocheted, elastic or rubberized ( including elastic knee-caps and elastic stockings), obtained by sewing or by the assembly of pieces of knitted or crocheted goods ( cut or obtained directly to shape)

61.01 Men's and boys' outer garments Manufacture from yarn (x ) (2)

ex 61.01 Fire resistant equipment of cloth Manufacture from uncoated cloth covered by foil of aluminized of which the value does not polyester exceed 40% of the value of the finished product (*) (2)

ex 61.02 Women's, girls' and infants' Manufacture from yarn ( 4 ) (2) outer garments, not embroidered

ex 61.02 Fire resistant equipment of cloth Manufacture from uncoated cloth covered by foil of aluminized of which the value does not polyester exceed 40°/o of the value of the finished product (*) (2 )

ex 61.02 Women's, girls' and infants' Manufacture from fabrics, not outer garments, embroidered embroidered, the value of which does not exceed 40 °/o of the value of the finished product (x )

( ) Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated. (2) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B.

No L 166/32 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

61.03 Men's and boys' under garments, Manufacture from yarn (l ) (2) including collars, shirt fronts and cuffs

61.04 Women's, girls' and infants' Manufacture from yarn (*) (2) under garments

ex 61.05 Manufacture from unbleached Handkerchiefs, not embroidered single yarn (*) (2) (3)

ex 61.05 Handkerchiefs, embroidered Manufacture from fabrics, not embroidered, the value of which does not exceed 40% of the value of the finished product (*)

ex 61.06 Shawls, scarves, mufflers, man­ Manufacture from unbleached tillas, veils and the like, not single yarn of natural textile embroidered fibres or discontinuous man-made fibres or their waste, or from chemical products or textile pulp (x ) (2)

ex 61.06 Shawls, scarves , mufflers, man­ Manufacture from fabrics, not tillas, veils and the like, embroidered, the value of which embroidered does not exceed 40% of the value of the finished product (J )

61.07 Ties, bow ties and cravats Manufacture from yarn (1) (2)

ex 61.08 Collars, tuckers, fallals, bodice­ Manufacture from yarn (*) (2) fronts, jabots, cuffs, flounces, yokes and similar accessories and trimmings for women's and girls' garments, not embroidered

ex 61.08 Collars, tuckers, fallals, bodice­ Manufacture from fabrics, not fronts, jabots, cuffs, flounces, embroidered, the value of which yokes and similar accessories and does not exceed 40% of the trimmings for women's and value of the finished product (*) girls' garments, embroidered

61.09 Corsets, corset-belts, suspender­ Manufacture from yarn (l ) (2) belts, brassieres, braces, sus­ penders, garters and the like (including such articles of knitted or crocheted fabric), whether or not elastic

61.10 Gloves, mittens, mitts, stockings, Manufacture from yarn (*) (2) socks and sockettes, not being knitted or crocheted goods

(') Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated. (s) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B. (s) For products obtained from two or more textile materials , this rule does not apply to one or more of the mixed textile materials if its or their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

28 . 6 . 75 Official Journal of the European Communities No L 166/33

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

ex 61.10 Manufacture from uncoated cloth Fire resistant equipment of cloth of which the value does not covered by foil of aluminized exceed 40% of the value of the polyester finished product (*) (2)

61.11 Made up accessories for articles Manufacture from yarn (*) (2) of apparel (for example, dress shields, shoulder and other pads, belts, muffs, sleeve protectors, pockets)

62.01 Travelling rugs and blankets Manufacture from unbleached yarn of Chapters 50 to 56 (2) (8)

ex 62.02 Manufacture from unbleached Bed linen, table linen, toilet linen and kitchen linen; curtains and single yarn (2) (3) other furnishing articles; not embroidered

ex 62.02 Bed linen, table linen, toilet linen Manufacture from fabrics, not and kitchen linen ; curtains and embroidered, the value of which other furnishing articles; does not exceed 40% of the embroidered value of the finished product

62.03 Manufacture from chemical Sacks and bags, of a kind used for the packing of goods products, textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste (2) (s)

62.04 Tarpaulins, sails, awnings, sun­ Manufacture from single un­ blinds, tents and camping goods bleached yarn (2) (3)

62.05 Other made up textile articles Manufacture in which the value (including dress patterns) of the products used does not exceed 40% of the value of the finished product

64.01 Footwear with outer soles and Manufacture from assemblies of uppers of rubber or artificial uppers affixed to inner soles or plastic material to other sole components, but without outer soles, of any material except metal

(x) Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated. (*) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B. ( s) For products obtained from two or more textile materials, this rule does not apply to one or more of the mixed textile materials if its or their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

No L 166/34 28 . 6 . 75 Official Journal of the European Communities

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

64.02 Footwear with outer soles of Manufacture from assemblies of leather or composition leather; uppers affixed to inner soles or footwear (other than footwear to other sole components, but falling within heading No 64.01 ) without outer soles, of any with outer soles of rubber or material except metal artificial plastic material

64.03 Footwear with outer soles of wood Manufacture from assemblies of or cork uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal

64.04 Footwear with outer soles of other Manufacture from assemblies of materials uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal

65.03 Felt hats and other felt headgear, Manufacture from textile fibres being headgear made from the felt hoods and plateaux falling within heading No 65.01 , whether or not lined or trimmed

65.05 Hats and other headgear (includ­ Manufacture either from yarn or ing hair nets), knitted or from textile fibres crocheted, or made up from lace, felt or other textile fabric in the piece (but not from strips ), whether or not lined or trimmed

66.01 Manufacture in which the value Umbrellas and sunshades (includ­ ing walking-stick umbrellas, of the products used does not umbrella tents, and garden and exceed 50% of the value of the similar umbrellas) finished product

ex 70.07 Cast, rolled, drawn or blown glass Manufacture from drawn , cast or (including flashed or wired glass) rolled glass of heading Nos 70.04 cut to shape other than rectangu­ to 70.06 lar shape, or bent or otherwise worked (for example, edge worked or engraved) whether or not surface ground or polished ; multiple-walled insulating glass

28 . 6. 75 Official Journal of the European Communities No L 166/35

Products obtained Working or processing that does not Working or processing that confers the status of originating products when the CCT confer the status of originating products following conditions are met heading Description No

70.08 Safety glass consisting of Manufacture from drawn, cast or toughened or laminated glass, rolled glass of heading Nos 70.04 shaped or not to 70.06

70.09 Glass mirrors (including rear-view Manufacture from drawn, cast or mirrors), unframed, framed or rolled glass of heading Nos 70.04 backed to 70.06

71.15 Articles consisting of, or Manufacture in which the value incorporating, pearls, precious or of the products used does not semi-precious - stones (natural, exceed 50°/o of the value of the synthetic or reconstructed) finished product (*)

73.07 Blooms, billets, slabs and sheet Manufacture from products of bars (including tinplate bars) of heading No 73.06 iron or steel ; pieces roughly shaped by forging, of iron or steel

73.08 Iron or steel coils re-rolling Manufacture from products of heading No 73.07

73 09 Universal plates of iron or steel Manufacture from products of heading No 73.07 or 73.08

73 10 Bars and rods (including wire Manufacture from products of rod), of iron or steel, hot-rolled, heading No 73.07 forged, extruded, cold-formed or cold-finished (including precision­ made); hollow mining drill steel

73.11 Angles, shapes and sections, of Manufacture from products of iron or steel, hot-rolled, forged, heading Nos 73.07 to 73.10, 73.12 extruded, cold-formed or cold­ or 73.13 finished ; sheet piling of iron or steel , whether or not drilled , punched or made from assembled elements

73.12 Hoop and strip, of iron or steel , Manufacture from products of hot-rolled or cold-rolled heading Nos 73.07 to 73.09 or 73.13

73.13 Sheets and plates, of iron or steel, Manufacture from products of hot-rolled or cold-rolled heading Nos 73.07 to 73.09

73.14 Iron or steel wire, whether or Manufacture from products of not coated, but not insulated heading No 73.10

(l) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

No L 166/36 Official Journal of the European Communities 28 . 6. 75

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

73.16 Railway and tramway track Manufacture from products of construction material of iron or heading No 73.06 steel, the following : rails, check­ rails, switch blades, crossings (or frogs ), crossing pieces, point rods, rack rails, sleepers, fish-plates, chairs, chair wedges, sole plates ( base plates ), rail clips, bed-plates, ties and other material specialized for joining or fixing rails

73.18 Tubes and pipes and blanks Manufacture from products of r therefor, of iron (other than of heading Nos 73.06 and 73.07 or cast iron) or steel, excluding heading No 73.15 in the forms high-pressure hydro-electric specified in heading Nos 73.06 conduits and 73.07

74.03 Wrought bars, rods, angles, Manufacture in which the value shapes and sections, of copper; of the products used does not copper wire exceed 50 °/o of the value of the finished product (*)

74.04 Wrought plates, sheets and strip, Manufacture in which the value of copper of the products used does not exceed 50% of the value of the finished product (1 )

74.05 Copper foil (whether or not Manufacture in which the value embossed, cut to shape, perfor­ of the products used does not ated, coated, printed, or backed exceed 50% of the value of the with paper or other reinforcing finished product (*) material), of a thickness (excluding any backing) not exceeding 0-15 mm

74.06 Copper powder and flakes Manufacture in which the value of the products used does not exceed 50% of the value of the finished product (1)

74.07 Tubes and pipes and blanks Manufacture in which the value therefor, of copper; hollow bars of the products used does not of copper exceed 50% of the value of the finished product (*)

74.08 Tube and pipe fittings (for Manufacture in which the value example, joints, elbows, sockets of the products used does not and flanges), of copper exceed 50% of the value of the finished product (*)

t1) These provisions do not apply where the products arc obtained from products which have acquired the status of originating products in accordance' with the conditions laid down in List B.

28 . 6. 75 Official Journal of the European Communities No L 166/37

Products obtained Working or processing that does not Working or processing that confers the confer the stacus of originating products status of originating products when the CCT following conditions are met heading Description No

74.09 Reservoirs, tanks, vats and Manufacture in which the value similar containers, for any of the products used does not material ( other than compressed exceed 50% of the value of the or liquified gas), of copper, of finished product (') a capacity exceeding 300 litres, whether or not lined or heat­ insulated, but not fitted with mechanical or thermal equipment

74.10 Stranded wire, cables, cordage, Manufacture in which the value ropes, plaited bands and the like, of the products used does not of copper wire, but excluding exceed 50% of the value of the insulated electric wires and cables finished product (')

74.11 Gauze, cloth, grill , netting, Manufacture in which the value fencing, reinforcing fabric and of the products used does not similar materials (including end­ exceed 50% of the value of the less bands), of copper wire finished product 0 )

74.12 Expanded metal, of copper Manufacture in which the value of the products used does not exceed 50% of the value of the finished product (')

74.13 Chain and parts thereof, of copper Manufacture in which the value of the products used does not exceed 50% of the value of the finished product (')

74.14 Manufacture in which the value Nails, tacks, staples, hook-nails, spiked cramps, studs, spikes and of the products used does not drawing pins, of copper, or of exceed 50% of the value of the iron or steel with heads of copper finished product (J )

74.15 Manufacture in which the value Bolts and nuts ( including bolt ends and screw studs), whether of the products used does not or not threaded or tapped, and exceed 50% of the value of the screws (including screw hooks finished product H and screw rings ), of copper; rivets, cotters, cotter-pins, washers and spring washers, of copper

74.16 Springs, of copper Manufacture in which the value of the products used does not exceed 50% of the value of the finished product 0 )

74 17 Cooking and heating apparatus Manufacture in which the value of a kind used for domestic of the products used does not purposes, not electrically exceed 50% of the value of the operated, and parts thereof, of finished product (') copper

(*) These provisions do nor apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

I No L 166/38 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that does not Working or processing that confers the status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

74.18 Manufacture in which the value Other articles of a kind commonly used for domestic purposes, of the products used does not exceed 50% of the value of the sanitary ware for indoor use, and parts of such articles and ware, finished product (*) of copper

Manufacture in which the value 74.19 Other articles of copper of the products used does not exceed 50% of the value of the finished product (*)

Manufacture in which the value 75.02 "Wrought bars, rods, angles, shapes and sections, of nickel ; of the products used does not nickel wire exceed 50% of the value of the finished product (x)

Manufacture in which the value 75.03 Wrought plates, sheets and strip, of nickel ; nickel foil ; nickel of the products used does not exceed 50% of the value of the powders and flakes finished product (1 )

75.04 Tubes and pipes and blanks Manufacture in which the value therefor, of nickel ; hollow bars, of the products used does not and tube and pipe fittings ( for exceed 50% of the value of the example, joints, elbows, sockets finished product (*) and flanges), of nickel

75.05 Electro-plating anodes, of nickel, Manufacture in which the value wrought or unwrought, including of the products used does not those produced by electrolysis exceed 50% of the value of the finished product (*)

75.06 Other articles of nickel Manufacture in which the value of the products used does not exceed 50% of the value of the finished product (1)

76.02 Wrought bars, rods, angles, shapes Manufacture in which the value and sections, of aluminium ; of the products used does not aluminium wire exceed 50% of the value of the finished product

76.03 Wrought plates, sheets and strip, Manufacture in which the value of aluminium of the products used does not exceed 50% of the value of the finished product

76.04 Aluminium foil (whether or not Manufacture in which the value embossed, cut to shape, perfor­ of the products used does not ated, coated, printed, or backed exceed 50% of the value of the with paper or other reinforcing finished product material ), of a thickness (excluding any backing) not exceeding 0-20 mm

t1) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

28 . 6. 75 Official Journal of the European Communities No L 166/39

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

76.05 Aluminium powders and flakes Manufacture in which the value of the products used does not exceed 50% of the value of the finished product

76.06 Tubes and pipes and blanks Manufacture in which the value therefor, of aluminium; hollow of the products used does not bars of aluminium exceed 50%> of the value of the finished product

76.07 Tube and pipe fittings (for Manufacture in which the value example, joints, elbows, sockets of the products used does not exceed 50% of the value of the and flanges), of aluminium finished product

76.08 Structures, complete or incom­ Manufacture in which the value plete, whether or not assembled, of the products used does not and parts of structures (for exceed 50% of the value of the example, hangars and other finished product buildings, bridges and bridge­ sections, towers, lattice masts, roofs, roofing frameworks, door and window frames, balustrades, pillars and columns), of alu­ • minium ; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in struc­ tures, of aluminium

76.09 Reservoirs, tanks, vats and Manufacture in which the value similar containers, for any of the products used does not material (other than compressed exceed 50% of the value of the or liquified gas), of aluminium, finished product of a capacity exceeding 300 litres, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment

76.10 Casks, drums, cans, boxes and Manufacture in which the value similar containers (including rigid of the products used does not and collapsible tubular exceed 50% of the value of the containers), of aluminium, of a finished product description commonly used for the conveyance or packing of goods

76.11 Containers of aluminium for Manufacture in which the value compressed or liquified gas of the products used does not exceed 50% of the value of the finished product

76.12 Stranded wire, cables, cordage, Manufacture in which the value ropes, plaited bands and the like, of the products used does not of aluminium wire, but excluding exceed 50% of the value of the insulated electric wires and cables finished product

76.13 Gauze, cloth, grill, netting, Manufacture in which the value reinforcing fabric and similar of the products used does not materials, of aluminium wire exceed 50% of the value of the finished product

No L 166/40 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

76.14 Expanded metal, of aluminium Manufacture in which the value of the products used does riot exceed 50% of the value of the finished product

76.15 Articles of a kind commonly used Manufacture in which the value for domestic purposes, sanitary of the products used does not ware for indoor use, and parts exceed 50% of the value of the of such articles and ware, of finished product aluminium

76.16 Other articles of aluminium Manufacture in which the value of the products used does not exceed 50% of the value of the finished product

77.02 Wrought bars, rods, angles, Manufacture in which the value shapes and sections, of of the products used does not magnesium ; magnesium wire ; exceed 50% of the value of the wrought plates, sheets and strip, finished product of magnesium ; magnesium foil ; raspings and shavings of uniform size, powders and flakes, of magnesium ; tubes and pipes and blanks therefor, of magnesium ; hollow bars of magnesium

77.03 Other articles of magnesium Manufacture in which the value of the products used does not exceed 50% of the value of the finished product

78.02 Wrought bars, rods, angles, Manufacture in which the value shapes and sections, of lead; lead of the products used does not wire exceed 50% of the value of the finished product (*)

78.03 Wrought plates, sheets and strip, Manufacture in which the value of lead of the products used does not exceed 50% of the value of the finished product (*)

78.04 Lead foil (whether or not Manufacture in which the value embossed, cut to shape, perfor­ of the products used does not ated, coated, printed, or backed exceed 50% of the value of the with paper or other reinforcing finished product (*) material ), of a weight (excluding any backing) not exceeding 1-7 kg/m2 ; lead powders and flakes

78.05 Tubes and pipes and blanks Manufacture in which the value therefor, of lead ; hollow bars and of the products used does not tube and pipe fittings (for exceed 50% of the value of the example, joints, elbows, sockets, finished product (*) flanges and S-bends)

(*) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

28 . 6. 75 Official Journal of the European Communities No L 166/41

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the CCT confer the status of originating products following conditions are met heading Description No

78.06 Other articles of lead Manufacture in which the value of the products used does not exceed 50°/o of the value of the finished product (*)

79.02 Wrought bars, rods, angles, Manufacture in which the value shapes and sections, of zinc ; zinc of the products used does not wire exceed 50% of the value of the finished product

79.03 Wrought plates, sheets and strip, Manufacture in which the value of zinc; zinc foil ; zinc powders of the products used does not and flakes exceed 50% of the value of the finished product

79.04 Tubes and pipes and blanks Manufacture in which the value therefor, of zinc; hollow bars, and of the products used does not tube and pipe fittings (for exceed 50% of the value of the example, joints, elbows, sockets finished product and flanges), of zinc

79.05 Manufacture in which the value Gutters, roof capping, skylight frames, and other fabricated of the products used does not building components, of zinc exceed 50% of the value of the finished product

79.06 Other articles of zinc Manufacture in which the value of the products used does not exceed 50% of the value of the finished product

80.02 Wrought bars, rods, angles, shapes Manufacture in which the value and sections, of tin ; tin wire of the products used does not exceed 50% of the value of the finished product

80.03 Wrought plates, sheets and strip, Manufacture in which the value of tin of the products used does not exceed 50% of the value of the finished product

80.04 Tin foil (whether or not Manufacture in which the value embossed, cut to shape, perfora­ of the products used does not ted, coated, printed, or backed exceed 50% of the value of the with paper or other reinforcing finished product material), of a weight (excluding any backing) not exceeding 1 kg/ m2; tin powders and flakes

(l) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

No L 166/42 Official Journal of the European Communities 28 . 6. 75

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the confer the status of originating products CCT following conditions are met heading Description No

80.05 Manufacture in which the value Tubes and pipes and blanks therefor, of tin ; hollow bars, and of the products used does not tube and pipe fittings (for exceed 50 % of the value of the example, joints, elbows, sockets finished product and flanges), of tin

82.05 Interchangeable tools for hand Working, processing or assembly tools, for machine tools or for in which the value of the power-operated hand tools (for materials and parts used does not example, for pressing, stamping, exceed 40% of the value of the drilling, tapping, threading, finished product (*) boring, broaching, milling, cutting, turning, dressing, morticing or screwdriving), including dies for wire drawing, extrusion dies for metal, and rock drilling bits

82.06 Knives and cutting blades, for Working, processing or assembly machines or for mechanical in which the value of the appliances materials and parts used does not exceed 40% of the value of the finished product (*)

ex Boilers, machinery and mechanical Working, processing or assembly appliances and parts thereof, in which the value of the materials Chapter 84 excluding refrigerators and and parts used does not exceed refrigerating equipment (electrical 40 % of the value of the finished and other) (No 84.15 ) and sewing product machines, including furniture specially designed for sewing machines (ex No 84.41 )

84.15 Refrigerators and refrigerating Working, processing or assembly equipment (electrical and other) in which the value of the non­ originating materials and parts used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (2) used are originating products

(*) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B. (2) In determining the value of products, materials and parts, the following must be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid, in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of products, materials and parts other than those referred to under (a), the provisions of Article 4 of Annex II determining : (i) the value of imported products, (ii) the value of products of undetermined origin.

28 . 6 . 75 Official Journal of the European Communities No L 166/43

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

ex 84.41 Sewing machines, including Working, processing or assembly furniture for sewing machines in which the value of the non­ originating materials and parts used does not exceed 40% of the value of the finished product, and provided that:

(a) at least 50% in value of the materials and parts (x ) used for the assembly of the head (motor excluded) are originat­ ing products, and

(b) the thread tension, crochet and zigzag mechanisms are originating products

ex Electrical machinery and equip­ Working, processing or assembly Chapter ment; parts thereof; excluding in which the value of the non­ 85 products of heading No 85.14 or originating material and parts 85.15 used does not exceed 40% of the value of the finished product

85.14 Microphones and stands therefor; Working, processing or assembly loudspeakers ; audio-frequency in which the value of the non­ electric amplifiers originating materials and parts used does not exceed 40% of the value of the finished product, and provided that:

( a) at least 50% in value of the materials and parts (*) used are originating products, and

(b ) the value of the non-originat­ ing transistors used does not exceed 3% of the value of the finished product (2)

( ) In determining the value of products, materials and parts, the following must be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid, in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of products, materials and parts, other than those referred to under (a), the provisions of Article 4 of Annex II determining ; (i) the value of imported products, (ii) the value of products of undetermined origin. (*) This percentage is not cumulative with the 40 % .

No L 166/44 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

85.15 Radiotelegraphic and radio­ Working, processing or assembly telephonic transmission and in which the value of the non­ reception apparatus ; radio­ originating materials and parts broadcasting and television used does not exceed 40% of the transmission and reception value of the finished product, and apparatus (including receivers provided that: incorporating sound recorders or ( a) at least 50% in value of the reproducers) and television materials and parts (') used cameras ; radio navigational aid are originating products, and apparatus, radar apparatus and radio remote control apparatus (b) the value of the non-originat­ ing transistors used does not exceed 3% of the value of the finished product (2)

Chapter Railway and tramway locomo­ Working, processing or assembly 86 tives, rolling-stock and parts in which the value of the materials thereof; railway and tramway and parts used does not exceed track fixtures and fittings ; traffic 40% of the value of the finished signalling equipment of all kinds product (not electrically powered)

ex Vehicles, other than railway or Working, processing or assembly Chapter tramway rolling-stock, and parts in which the value of the materials 87 thereof, excluding products of and parts used does not exceed heading No 87.09 40% of the value of the finished product

87.09 Motor-cycles, autocycles and Working, processing or assembly cycles fitted with an auxiliary in which the value of the non­ motor, with or without side-cars; originating materials and parts side-cars of all kinds used does not exceed 40% of the finished product, and provided that at least 50% in value of the materials and parts (*) used are originating products

ex Optical, photographic cinema­ Working, processing or assembly Chapter tographic, measuring, checking, in which the value of the materials 90 precision, medical and surgical and parts used does not exceed instruments and apparatus and 40% of the value of the finished parts thereof, excluding products product of heading No 90.05 , 90.07, 90.08, 90.12 or 90.26

( ) In determining the value of products, materials and parts, the following must be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid, in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of products, materials and parts, other than those referred to under (a), the provisions of Article 4 of Annex II determining : (i) the value of imported products , (ii) the value of products of undetermined origin. (*) This percentage is not cumulative with the 40%.

28 . 6. 75 Official Journal of the European Communities No L 166/45

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

90.05 Refracting telescopes (monocular Working, processing or assembly and binocular), prismatic or not in which the value of the non­ originating materials and parts used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (*) used are originating products

90.07 Photographic cameras; photo­ Working, processing or assembly graphic flashlight apparatus in which the value of the non­ originating materials and parts used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (*) used are originating products

90 08 Cinematographic cameras projec­ Working, processing or assembly tors, sound recorders and sound in which the value of the non­ reproducers ; any combination of originating materials and parts these articles used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (*) used are originating products

90.12 Compound optical microscopes, Working, processing or assembly whether or not provided with in which the value of the non­ means for photographing or originating materials and parts projecting the image used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (*) used are originating products

90.26 Gas, liquid and electricity supply Working, processing or assembly or production meters ; calibrating in which the value of the non­ meters therefor originating materials and parts used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (*) used are originating products

P) In determining the value of products, materials and parts, the following must be taken into account : * (a) in respect of originating products, materials and parts, the first verifiable price paid, in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out : (b) in respect of products, materials and parts, other than those referred to under (a), the provisions of Article 4 of Annex II determining : (i) the value of imported products, (ii) the value of products of undetermined origin.

No L 166/46 Official Journal of the European Communities 28 . 6 . 75

Products obtained Working or processing that does not Working or processing that confers the confer the status of originating products status of originating products when the CCT following conditions are met heading Description No

ex Clocks and watches and parts Working, processing or assembly Chapter thereof, excluding products of in which the value of the materials 91 heading No 91.04 or 91.08 and parts used does not exceed 40% of the value of the finished product

Working, processing or assembly 91.04 Other clocks in which the value of the non­ originating materials and parts used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (*) used are originating products

91.08 Clock movements, assembled Working, processing or assembly in which the value of the non­ originating materials and parts used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (x ) used are originating products

ex Musical instruments ; sound Working, processing or assembly Chapter recorders and reproducers ; tele­ in which the value of the non­ 92 vision image and sound recorders originating materials and parts and reproducers, magnetic ; parts used does not exceed 40% of the and accessories of such articles ; value of the finished product excluding products of heading No 92.11

92.11 Gramophones, dictating machines Working, processing or assembly and other sound recorders and in which the value of the non­ reproducers, including record originating materials and parts players and tape decks, with or used does not exceed 40% of the without sound-heads ; television value of the finished product, and image and sound recorders and provided that: reproducers, magnetic (a) at least 50% in value of the materials and parts (*) used are originating products, and

(b ) the value of the non-originat­ ing transistors used does not exceed 3% of the value of the finished product (2)

J1) In determining the value of products, materials and parts, the following must be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid, in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of products, materials and parts, other than those referred to under (a), the provisions of Article 4 of Annex II determining : (i) the value of imported products, (ii) the value of products of undetermined origin. (') This percentage is not cumulative with the 40 % .

28 . 6 . 75 Official Journal of the European Communities No L 166/47

Products obtained Working or processing that confers the Working or processing that does not status of originating products when the CCT confer the status of originating products following conditions are met heading Description No

Arms and ammunition ; parts Manufacture in which the value Chapter 93 thereof of the products used does not • exceed 50°/o of the value of the finished product

96.02 Other brooms and brushes (in­ Manufacture in which the value cluding brushes of a kind used as of the products used does not parts of machines); paint rollers ; exceed 50°/o of the value of the squeegees (other than roller finished product squeegees) and mops

Other toys; working models of Manufacture in which the value 97,03 a kind used for recreational of the products used does not purposes exceed 50% of the value of the finished product

98.01 Buttons and button moulds, studs, Manufacture in which the value cuff-links, and press-fasteners, of the products used does not including snap fasteners and press­ exceed 50%> of the value of the studs ; blanks and parts of such finished product articles

98.08 Typewriter and similar ribbons, Manufacture in which the value whether or not on spools; ink­ of the products used does not pads, with or without boxes exceed 50% of the value of the finished product

No L 166/48 Official Journal of the European Communities 28 . 6 . 75

Annex 3 to Annex II

LIST B

List of working or processing operations which do not result in a change of tariff heading, but which do confer the status of 'originating products ' on the products undergoing such operations

Finished products Working or processing that confers the status of originating products CCT heading No Description

Incorporation of non-originating materials and parts in boilers, machinery, mechanical appliances, etc., of Chapters 84 to 92 in boilers and radiators of heading No 73.37 and in the products contained in heading Nos 97,07 and 98.03 does not make such products lose their status of originating products, provided that the value of these products does not exceed 5% of the value of the finished product

13.02 Shellac, seed lac, stick lac and other lacs ; natural Working, processing or assembly in which the value gums, resins, gum-resins and balsams of the non-originating materials and parts used does not exceed 50°/o of the value of the finished product

ex 15.10 Fatty alcohols Manufacture from fatty acids

ex 21.03 Prepared mustard Manufacture from mustard flour

ex 22.09 Whisky of an alcoholic strength of less than 50° Manufacture from alcohol deriving exclusively from the distillation of cereals and in which the value of the non-originating constituent products does not exceed 15°/o of the value of the manufac­ tured product

ex 25.09 Earth colours, calcined or powdered Crushing and calcination or powdering of earth colours

ex 25.15 Marble squared by sawing, of a thickness not Sawing into slabs or sections, polishing, grinding exceeding 25 cm and cleaning of marble, including marble not further worked than roughly split, roughly squared or squared by sawing, of a thickness exceeding 25 cm

ex 25 16 Granite, porphyry, basalt, sandstone and other Sawing of granite, porphyry, basalt, sandstone and monumental and building stone, squared by sawing, other building stone, including such stone not of a thickness not exceeding 25 cm further worked than roughly split, roughly squared or squared by sawing, of a thickness exceeding 25 cm

ex 25.18 Calcined dolomite ; agglomerated dolomite (includ­ Calcination of unworked dolomite ing tarred dolomite)

Products of the chemical and allied industries Chapters Working or processing in which the value of the 28 to 37 excluding mineral or chemical fertilizers, potassic: non-originating products used does not exceed 20% calcined, crushed and powdered natural aluminium of the value of the finished product calcium phosphates (ex 31.03 ) and essential oils other than of citrus fruit, terpeneless (ex 33.01 )

28 . 6 . 75 Official Journal of the European Communities No L 166/49

Finished products Working or processing that confers the status of originating products CCT Description heading No

ex 31.03 Mineral or chemical fertilizers, potassic: calcined, Crushing and powdering of calcined natural crushed and powdered natural aluminium calcium aluminium calcium phosphates phosphates

ex 33.01 Essential oils other than of citrus fruit, terpeneless Deterpenation of essential oils other than of citrus fruit

ex Miscellaneous chemical products, other than refined Working or processing in which the value of the Chapter 38 tall oil (ex 38.05 ) and sulphate turpentine refined non-originating materials used does not exceed 20% (ex 38.07) of the value of the finished product

ex 38.05 Refined tall oil Refining of crude tall oil

ex 38.07 Sulphate turpentine, purified Purification consisting of the distillation or refining of raw sulphate turpentine

ex Artificial plastic materials, cellulose ethers and Working or processing in which the value of the Chapter 39 esters, artificial resins and articles made of these non-originating materials used does not exceed materials, excepting films of ionomers (ex 39.02) 20%> of the value of the finished product

ex 39.02 Ionomer film Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralized with metal ions, mainly zinc and sodium

ex 40.01 Slabs of crepe rubber for soles Lamination of crepe sheets of natural rubber

ex 40.07 Manufacture from rubber thread or cord Rubber thread and cord, textile-covered

ex 41.01 Sheep - and lamb-skins without the wool Removing wool from sheep- and lamb-skins in the wool

ex 41.02 Retanned bovine cattle leather (including buffalo Retanning of bovine cattle leather (including buffalo leather) and equine leather, except leather of leather) and equine leather, not further prepared than tanned heading Nos 41.06 to 41.08

ex 41.03 Retanned sheep- and lamb-skin leather, except Retanning of sheep- and lamb-skin leather, not leather of heading Nos 41.06 to 41.08 further prepared than tanned

ex 41.04 Retanned goat and kid skin leather, except leather Retanning of goat and kid skin leather, not of heading Nos 41.06 to 41.08 further prepared than tanned

ex 41.05 Other kinds of retanned leather, except leather of Retanning of other kinds of leather, not further heading Nos 41.06 to 41.08 prepared than tanned

ex 43.02 Assembled furskins Bleaching, dyeing, dressing, cutting and assembling of tanned or dressed furskins

ex 50.03 Silk waste carded or combed Carding or combing waste silk

No L 166/50 Official Journal of the European Communities 28 . 6. 75

Finished products Working or processing that confers the status of originating products CCT heading No Description

ex 50.09 ex 50.10 ex 51.04 ex 53.11 Printing accompanied by finishing operations ex 53.12 ( bleaching, dressing, drying, steaming, burling, ex 53.13 ' Printed fabrics mending, impregnating, sanforizing, mercerizing) ex 54.05 of fabrics the value of which does not exceed ex 55.07 47-5% of the value of the finished product ex 55.08 ex 55.09 ex 56.07 -

ex 59.14 Incandescent gas mantles Manufacture from tubular gas mantle fabric

ex 68.03 Articles of slate, including articles of agglomerated Manufacture of articles of slate slate

ex 68.13 Articles of asbestos ; articles of mixtures with a Manufacture of articles of asbestos or of mixtures basis of asbestos or of mixtures with a basis of with a basis of asbestos, or of mixtures with a basis asbestos and magnesium carbonate of asbestos and magnesium carbonate

ex 68.15 Manufacture of articles of mica Articles of mica, including bonded mica splittings on a support of paper or fabric

ex 70.10 Cut-glass bottles Cutting of bottles the value of which does not exceed 50% of the value of the finished product

70.13 Glassware (other than articles falling i^ heading Cutting of glassware the value of which does not No 70.19 ) of a kind commonly used for table, exceed 50% of the value of the finished product kitchen, toilet or office purposes, for indoor or decoration, with the exception of silk-screen decoration, or similar uses printing, carried out entirely by hand, of hand­ blown glassware the value of which does not exceed 50% of the value of the finished product

ex 70.20 Articles made from glass fibre Manufacture from unworked glass fibre

ex 71.02 Precious and semi-precious stones, cut or otherwise Manufacture from unworked precious and semi­ worked, but not mounted, set or strung (except precious stones ungraded stones temporarily strung for convenience of transport)

ex 71.03 Synthetic or reconstructed precious or semi-precious Manufacture from unworked synthetic or stones, cut or otherwise worked, but not mounted, reconstructed precious or semi-precious stones set or strung (except ungraded stones temporarily strung for convenience of transport)

ex 71.05 Silver and silver alloys, including silver gilt and Rolling, drawing, beating or grinding of unwrought platinum-plated silver, semi-manufactured silver and silver alloys

ex 71.05 Silver, including silver gilt and platinum-plated Alloying or electrolytic separation of unwrought silver, unwrought silver and silver alloys

28 . 6 . 75 Official Journal of the European Communities No L 166/51

Finished products Working or processing that confers the status of originating products CCT heading No Description

ex 71.06 Rolled silver, semi-manufactured Rolling, drawing, beating or grinding of unwrought rolled silver

ex 71.07 Gold, including platinum-plated gold, semi-manu­ Rolling, drawing, beating or grinding of unwrought factured gold, including platinum-plated gold

ex 71.07 Gold, including platinum-plated gold, unwrought Alloying or electrolytic separation of unwrought gold or gold alloys

ex 71.08 Rolled gold on base metal or silver, semi-manu­ Rolling, drawing, beating or grinding of unwrought factured rolled gold on base metal or silver

ex 71.09 Platinum and other metals of the platinum group, Rolling, drawing, beating or grinding of unwrought semi-manufactured platinum or other metals of the platinum group

ex 71.09 Platinum and other metals of the platinum group, Alloying or electrolytic separation of unwrought unwrought platinum or other metals of the platinum group

ex 71.10 Rolled platinum or other platinum group metals, Rolling, drawing, beating or grinding of unwrought on base metal or precious metal, semi-manufactured rolled platinum or other unwrought platinum group metals or precious metal

ex 73.15 Alloy steel and high carbon steel :

— in the forms mentioned in heading Nos 73.07 Manufacture from products in the forms mentioned to 73.13 in heading No 73.06

— in the forms mentioned in heading No 73.14 Manufacture from products in the forms mentioned in heading No 73.06 or 73.07

ex 74.01 Unrefined copper (blister copper and other) Smelting of copper matte

ex 74.01 Refined copper Fire-refining or electrolytic refining of unrefined copper (blister copper and other), copper waste or scrap

ex 74.01 Copper alloy Fusion and thermal treatment of refined copper, copper waste or scrap

ex 75.01 Unwrought nickel (excluding electro-plating anodes Refining by electrolysis, by fusion or chemically, of heading No 75.05 ) of nickel mattes, nickel speiss and other intermediate products of nickel metallurgy

ex 75.01 Unwrought nickel except nickel alloys Refining of waste by electrolysis, by melting or by chemical means of waste and scrap

No L 166/52 Official Journal of the European Communities 28 . 6. 75

Finished products Working or processing that confers the status of originating products CCT heading No Description

ex 76.01 Unwrought aluminium Manufacture by thermal or electrolytic treatment of unalloyed aluminium and scrap

ex 77.04 Beryllium wrought Rolling, drawing or grinding of unwrought beryl­ lium the value of which does not exceed 50°/o of the value of the finished product

ex 78.01 Refined lead Manufacture by thermal refining from bullion lead

ex 81.01 Tungsten, wrought Manufacture from unwrought tungsten the value of which does not exceed 50% of the value of the finished product

ex 81.02 Molybdenum, wrought Manufacture from unwrought molybdenum the value of which does not exceed 50% of the value of the finished product

ex 81.03 Tantalum, wrought Manufacture from unwrought tantalum the value of which does not exceed 50% of the value of the finished product

ex 81.04 Other base metals, wrought Manufacture from other base metals, unwrought the value of which does not exceed 50% of the value of the finished product

ex 83.06 Indoor ornaments made from base metals other Working or processing in which the value of the than statuettes non-originating materials used does not exceed 30% of the value of the finished product

84.06 Internal combustion piston engines Working, processing or assembly in which the value of the materials and parts used does not exceed 40% of the value of the finished product

ex 84.08 Engines and motors, excluding reaction engines Working, processing or assembly in which the and gas turbines value of the non-originating materials and parts used does not exceed 40% of the value of the finished product, and provided that at least 50% in value of the materials and parts (*) used are originating products

84.16 Calendering and similar rolling machines ( other Working, processing or assembly in which the than metal-working and metal-rolling machines value of the non-originating materials and parts and glass working machines) and cylinders thereof used does not exceed 25% of the value of the finished product

(*) In determining the value of products, materials and parts , the following must be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid , or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of other products , materials and parts, other than those referred to under (a), the provisions of Article 4 of Annex II determining : (i ) the value of imported products, (ii; the value of products of undetermined origin.

28 . 6 . 75 Official Journal of the European Communities No L 166/53

Finished products Working or processing that confers the status of originating products CCT heading No Description

ex 84.17 Machinery, plant and similar laboratory equipment, Working, processing or assembly in which the whether or not electrically heated, for the treatment value of the non-originating materials and parts of materials by a process involving a change of used does not exceed 25°/o of the value of the temperature, for wood, paper pulp, paper and finished product paperboard manufacturing industries

84.31 Machinery for making or finishing cellulosic pulp, Working, processing or assembly in which the paper or paperboard value of the non-originating materials and parts used does not exceed 25% of the value of the finished product

84.33 Paper or paperboard cutting machines of all kinds; Working, processing or assembly in which the other machinery for making up paper pulp, paper value of the non-originating materials and parts or paperboard used does not exceed 25% of the value of the finished product

ex 84.41 Sewing machines, including furniture specially Working, processing or assembly in which the designed for sewing machines value of the non-originating materials and parts used does not exceed 40% of the value of the finished product, and provided that:

(a) at least 50% of the materials and parts (*) used for assembly of the head (motor excluded) are originating products, and

(b) the thread tension, crochet and zigzag mechanisms are originating products

85.14 Microphones and stands therefor; loudspeakers ; Working, processing or assembly in which the audiofrequency electric amplifiers value of the non-originating materials and parts used does not exceed 40% of the value of the finished product and provided that at least 50% of the materials and parts used are originating products (2)

85.15 Radiotelegraphic and radiotelephonic transmission Working, processing or assembly in which the value and reception apparatus ; radio, broadcasting and of the non-originating materials and parts used television transmission and reception apparatus does not exceed 40% of the value of the finished (including receivers incorporating sound recorders product and provided that at least 50% of the or reproducers) and television cameras ; radio materials and parts used are originating products (2) navigational aid apparatus, radar apparatus and radio remote control apparatus

87.06 Parts and accessories of the motor vehicles of Working, processing or assembly in which the value heading Nos 87.01 to 87.03 of the materials and parts used does not exceed 15% of the value of the finished product

(*) In determining the value of products, materials and parts, the following must be be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid, in case of sale, for the said products in the territory of the country where working, processing or assembly is carried out ; (b) in respect of products, materials and parts, other than those referred to under (a), the provisions of Article 4 of Annex II determining : (i) the value of imported products, (ii) the value of products of undetermined origin. (*) The application of this rule must not have the effect of allowing the exceeding of the percentage of 3 % for the originating transistors laid down in List A for the same tariff heading.

No L 166/54 Official Journal of the European Communities 28 . 6 . 75

Finished products Working or processing that confers the status of originating products CCT heading No Description

ex 94.01 Chairs and other seats (other than those falling Working, processing or assembly in which within heading No 94.02) whether or not unstuffed cotton cloth is used of a weight* of convertible into beds, made of base metals 300 g/m2 or less in the form ready to use, of which the value does not exceed 25°/o of the value of the finished product (*)

ex 94.03 Other furniture of base metal Working, processing or assembly in which unstuffed cotton cloth is used of a weight of 300 g/m2 or less in the form ready to use of which the value does not exceed 25% of the value of the finished product (*)

ex 95.01 Articles of tortoise-shell Manufacture from worked tortoise-shell

ex 95.02 Articles of mother of pearl Manufacture from worked mother of pearl

ex 95.03 Articles of ivory Manufacture from worked ivory

ex 95.04 Articles of bone (excluding whalebone) Manufacture from worked bone (excluding whalebone)

ex 95.05 Articles of horn, coral (natural or agglomerated) Manufacture from worked horn, coral (natural or or of other animal carving material agglomerated) or other animal carving material

ex 95.06 Articles of vegetable carving material (for example, Manufacture from worked vegetable carving corozo) material (for example, corozo )

ex 95.07 Articles of jet ( and mineral substitutes for jet), Manufacture from worked jet ( and mineral amber, meerschaum, agglomerated amber and substitutes for jet), amber, meerschaum, agglomer­ agglomerated meerschaum ated amber and agglomerated meerschaum

ex 98.11 Smoking pipes, pipe bowls, of wood, root or other Manufacture from roughly shaped blocks materials

(*) This rule does not apply when the general rule of change of tariff heading is applied to the other non-originating parts which are part of the composition of the final product.

28 . 6 . 75 Official Journal of the European Communities No L 166/55

Annex 4 to Annex II

LIST C

List of products excluded from the scope of Annex II

CCT heading No Description

ex 27.07 Assimilated aromatic oils as defined in Note 2 to Chapter 27, of which more than 65% by volume distils at a temperature of up to 250° C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels

27.09 ) Mineral oils and products of their distillation ; bituminous substances ; to y mineral waxes 27.16 J

ex 29.01 Hydrocarbons :

— acyclic — cyclanes and cyclenes, excluding azulenes — benzene, toluene, xylenes

for use as power or heating fuels

ex 34.03 Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, but not including preparations containing 70 °/o or more by weight of petroleum oils or of oils obtained from bituminous minerals

ex 34.04 Waxes with a basis of paraffin, of petroleum waxes, of waxes obtained from bituminous minerals, of slack wax or of scale wax

ex 38.14 Prepared additives for lubricants

Annex 5 to Annex II

MOVEMENT CERTIFICATE

1 . Exporter (Name, full address, country) EUR . 1 No A 000.000

See notes overleaf before completing this form

2. Certificate used in preferential trade between

3 . Consignee (Name, full address, country) ( Optional ) and

(insert appropriate countries, groups of countries or territories) i1) Complete 4. Country , group of 5 . Country , group of only in cases of exporting countries or territory countries or territory country in which the products of destination not being are considered as identical to the country originating O where the products are 6. Transport details ( Optional) 7 . Remarks originating. In the contrary case, this box has to be struck through.

2) If goods 9 . Gross 10 . Invoices 8. Item number ; marks and numbers ; Number and kind of packages (2) ; are not packed, in­ Description of goods weight (kg) ( Optional) dicate or other mea­ number of sure (litres, articles or state ' in m3, etc.) bulk ' as appropriate.

11 . CUSTOMS ENDORSEMENT 12 . DECLARATION BY THE EXPORTER Declaration certified I, the undersigned, declare that the goods Stamp described above meet the conditions re­ I3) Complete Export document (3 ) only where quired for the issue of the attached certificate. the regu­ Form No lations of Customs office the expor­ ting coun­ Issuing country or territory Place and date : try or ter­ ritory re­ quire. Date

( Signature) (Signature)

13 . REQUEST FOR VERIFICATION, to 14. RESULT OF VERIFICATION,

Verification carried out shows that this certificate (x)

P i was issued by the customs office indicated and that J—! the information contained therein is accurate.

] [ does not meet the requirements as to authenticity i—i and accuracy (see remarks appended). Verification of the authenticity and accuracy of this certi­ ficate is requested.

(Place and date) (Place and date) Stamp Stamp

( Signature) ( Signature) (l) Insert X in the appropriate box. ll

NOTES

1 . Certificates must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialled by the person who completed the certificate and endorsed by the customs authorities of the issuing country or territory. 2. No spaces must be left between the items entered on the certificate and each item must be preceded by an item number. A horizontal line must be drawn immediately below the last item. Any unused space must be struck through in such a manner as to make any later additions impossible. 3 . Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified.

APPLICATION FOR A MOVEMENT CERTIFICATE

1 . Exporter (Name, full address, country) EUR . 1 No A 000.000

See notes overleaf before completing this form

2. Application for a certificate to be used in preferential trade between 3 . Consignee (Name, full address, country) (Optional) and

(insert appropriate countries, groups of countries or territories) (*) Complete 4. Country, group of 5. Country, group of only in cases of exporting countries or territory countries or territory country in which the products of destination not being are considered as identical to the country originating (*) where the products are 6. Transport details (Optional) 7. Remarks originating. In the contrary case, this box has to be struck through .

O If goods 8. Item number ; marks and numbers ; Number and kind of packages (2) ; 9. Gross 10. Invoices are not Description of goods weight (kg) ( Optional) packed, in­ dicate or other mea­ number of sure (litres, articles or m3, etc.) state 'in bulk' as appropri­ ate.

DECLARATION BY THE EXPORTER

I , the undersigned, exporter of the goods described overleaf,

DECLARE that the goods meet the conditions required for the issue of the attached certificate ;

SPECIFY as follows the circumstances which have enabled these goods to meet the above conditions :

SUBMIT the following supporting documents (x) :

UNDERTAKE to submit, at the request of the appropriate authorities, any supporting evidence which these authorities may require for the purpose of issuing the attached certificate, and undertake, if required, to agree to any inspection of my accounts and to any check on the processes of manufacture of the above goods, carried out by the said authorities ;

REQUEST the issue of the attached certificate for these goods.

(Place and date)

(Signature)

C1) For example : import documents, movement certificates, invoices, manufacturer's declarations, etc., referring to the products used in manufacture or to the goods re-exported in the same state.

REQUEST FOR VERIFICATION RESULT OF VERIFICATION

The undersigned customs officer requests that the declaration by Verification carried out by the undersigned customs officer the exporter on the front of this form be verified (*) shows that : the statements and particulars given in this form are □ accurate (J) ;

this form does not meet the requirements as to authen­ □ ticity and accuracy (see remarks appended) (x)

(Place and date of signature ) (Place and date of signature)

Official Official stamp stamp

( Signature of customs officer) (Signature of customs officer) (x ) Place an x where applicable

*) Verification of the form is made on a sampling basis or whenever the customs authorities of the importing country have reasonable doubt as to the true origin of the goods in question or of constituents thereof. The customs authorities of the importing country must send the form to the authorities of the exporting country responsible for verification, specifying the reasons of substance or form which justify an inquiry. Wherever possible they must attach to the form the invoice submitted to them or a copy thereof, and give any information which it has been possible to obtain and which suggests that the particulars given in the form are inaccurate. If the customs authorities of the importing country decide to suspend/ the provisions of the Agreement while awaiting the results of the verification, they shall offer to release the goods to the importer subject to Such safeguards as may be considered necessary .

ootnotes for both forms

l) Indicate the Contracting Parties to the transaction in respect of which the form has been completed.

'A Refer to any verification already carried out by the appropriate authorities.

') Complete only in cases of exporting country not being identical to the country where the products are originating. In the contrary case, this box has to be struck through .

nstructions for the completion of form EUR.2

i.. A form EUR.2 may be made out only for goods which in the exporting country meet the conditions specified by the provisions governing the trade referred to in space 2.

Those provisions must be studied carefully before the form is completed.

5. The exporter must give the reference 'EUR.2' followed by the serial number of the form either on green label CI or on customs declaration C 2/ CP 3 .

>. After completing and signing the two parts of the form , the exporter must,

— in the case of a consignment by parcel post, attach the two parts to the dispatch note,

— in the case of a consignment by letter post, attach Part 1 firmly to the consignment and insert Part 2 inside it.

28 . 6 . 75 Official Journal of the European Communities No L 166/63

Annex 7 to Annex II

SPECIMEN OF DECLARATION

I, the undersigned, declare that the goods listed on this invoice were obtained in

(indicate the State(s) partner to the convention in which the products were obtained)

and (as appropriate) :

(a) (*) satisfy the rules on the definition of the concept of ' wholly produced products'

or (b) (*) were produced from the following products :

Description Country of origin Value (*)

and have undergone the following processes :

(indicate processings)

in

(indicate the State(s) partner to the convention in which the products were obtained)

(Place and date) (Signature)

(*) To be completed as necessary.

Annex 8 to Annex II EUROPEAN COMMUNITIES

1 . Supplier (x) INFORMATION CERTIFICATE

to facilitate the issue of a MOVEMENT CERTIFICATE for preferential trade between the

2. Consignee (1) EUROPEAN ECONOMIC COMMUNITY

and THE ACP STATES

3 . Processor (*) 4. State in which the working or processing has been carried out

5 . For official use 6. Customs office of importation (2)

7. Import document (2)

Form No

Series

Date

GOODS SENT TO THE MEMBER STATE OF DESTINATION

8. Marks, numbers, 9. Tariff heading number and description of goods 10. Quantity (3) quantity and kind of package

11 . Value (4)

IMPORTED GOODS USED

12. Tariff heading number and description 13 . Country of 14. Quantity (*) 15.Value (2)(5) origin

16. Nature of the working or processing carried out

17. Remarks

18 . CUSTOMS ENDORSEMENT 19. DECLARATION BY THE SUPPLIER Declaration certified I, the undersigned, declare that the information on this certificate is accurate Document

Form No

Customs office (date) (Place) Date H I I 1

Official stamp

(Signature) (Signature)

(*) (2) (3) (4) (5) See footnotes on verso.

l

REQUEST FOR VERIFICATION RESULT OF VERIFICATION

The undersigned customs official requests verification of the Verification carried out by the undersigned customs official authenticity and accuracy of this information certificate shows that this information certificate :

(a) was issued by the customs office indicated and that the information contained therein is accurate (*) (b) does not meet the requirements as to authenticity and accuracy (see notes appended) (*)

(Place and date) (Place and date)

Official Official stamp stamp

( Official's signature) ( Official's signature)

(*) Delete where not applicable .

CROSS REFERENCES

1) Name of individual or business and full address .

2) Optional information . (3) Kg, hi, m 3 or other measure. ( 4) Packaging shall be considered as forming a whole with the goods contained therein . However, this provision shall not apply to packaging which is not of the normal type for the article packed, and which has a lasting utility value of its own, apart from its function as packaging. ( 5) The value must be indicated in accordance with the provisions on rules of origin.