31976R3021

20 . 12. 76 Official Journal of the European Communities No L 349/23

COUNCIL REGULATION (EEC) No 3021/76 of 13 December 1976 opening preferential tariffs for certain products originating in developing countries

THE COUNCIL OF THE EUROPEAN COMMUNITIES, whereas such additional amount is variable and is calculated each year on the basis of the latest figures available, provided that this entails no reduction in Having regard to the Treaty establishing the Euro­ the ceiling; pean Economic Community,

Whereas the offer made by the Community includes Having regard to the proposal from the Commission, a clause stating that the Community drew up the offer on the assumption that all the main indus­ trialized countries which are members of the OECD Having regard to the opinion of the European Par­ would participate in granting preferences and would liament ( 1 ), make similar efforts in this direction ; whereas, more­ over, it is evident from the conclusions worked out in UNCTAD that this offer, while being of a temporary Whereas, within the context of UNCTAD, the Euro­ nature, does not constitute a binding commitment pean Economic Community offered to grant tariff and, in particular, may be withdrawn wholly or in preferences on finished and semi-finished products part at a later date; whereas this possibility may be coming from developing countries ; whereas the pre­ adopted inter alia with a view to remedying any un­ ferential treatment proposed in that offer covers, favourable situations which might arise in the ACP generally speaking, all finished and semi-finished in­ States following the implementation of the dustrial products covered by Chapters 25 to 99 of generalized preference scheme ; the Common Customs Tariff which originate in devel­ oping countries ; whereas the preference consists in the granting of exemption from customs duties ; whereas preferential imports are effected up to the Whereas, moreover, the conference of the Heads of level of ceilings calculated by value in respect of each State or of Government of the Member States and product of the basis of factors which are uniform the States acceding to the European Communities for all the products ; whereas in order that the prefer­ held in Paris from 19 to 21 October 1972 invited the ences granted to the most competitive developing Community institutions and the Member States pro­ country or countries should be restricted and that a gressively to adopt an overall policy of development substantial share should be reserved for the least cooperation on a world-wide scale comprising in competitive, preferential imports from any one particular the improvement of generalized preferences developing country in respect of a given product with the aim of achieving a steady increase in imports should not, as a general rule, exceed 50% of the of manufactures from the developing countries ; ceiling fixed for that product;

Whereas tariff preferences have been applied from Whereas, in the offer made by the Community, the the second half of 1971 under the conditions set out annual ceilings should normally be calculated on the above; whereas these preferences should continue basis of the total value for 1968 cif imports from the to be applied throughout 1977; whereas, having countries benefiting from this scheme, excluding regard to the terms of the offer concerned and to the those already enjoying various preferential tariff ar­ need to improve the generalized preferences, the rangements granted by the Community (basic abovementioned basic amount should normally refer amount), plus 5% of the value of cif imports from to 1974, as should generally the additional amount ; the other countries and from the countries already whereas however, the application of this method of enjoying such arrangements (additional amount); calculation should remain compatible with the pro­ gressive nature of the preference scheme in such a way as to provide a period of adaptation for the industrial sectors affected in the Community ; (*) O J No C 259 , 4. 11 . 1976, p . 27. whereas for this purpose it would appear adequate

No L 349/24 Official Journal of the European Communities 20 . 12 . 76

to limit for each product the considerable improve­ abovementioned countries and territories to this pre­ ment resulting from the said method "to a level which ferential scheme, the maximum Community amount does not exceed 150% of each of the preferential for certain products should be reduced to a lower amounts open in 1976 ; percentage ;

Whereas, however, in the multilateral trade nego­ Whereas in practice the latest complete statistics tiations, in accordance with paragraph 6 of the Tokyo available are those relating to the year 1974; whereas declaration, the Community reaffirmed that special however since that year the statistics in question and treatment should be granted to the least developed particularly those relating to the value of the Com­ among the developing countries whenever this is munity's external trade have been expressed in a possible ; whereas, therefore, charges of products statistical unit (EUR) whicfh is no longer defined in originating in the least developed developing the same way as the unit of account (u.a.) prescribed countries appearing on the list drawn up under for the Common Customs Tariff; whereas therefore United Nations resolution 3487 (XXX) of it is necessary to define a conversion rate between 12 December 1975 should not be subject to the these two units ; whereas in 1974 one EUR unit was maximum Community amount ; equivalent in practice to one European unit of ac­ count and the practice has been to ascribe to the latter the same value as for the unit of account (u.a.); Whereas, under these circumstances, these objectives whereas it seems appropriate therefore in these cir­ may be reached by applying a method of administra­ cumstances and for the particular ends of the calcu­ tion based on the charging, at Community level, lations required under this Regulation , to consider against the abovementioned ceilings and maximum the statistics expressed in EUR in this Regulation as amounts, of imports of the products concerned as if expressed in the unit of account of the Common and when these products are entered for home use Customs Tariff; whereas the unit of account should and are accompanied by a certificate of origin ; remain the only unit to he used within the preference whereas this method of administration must make system, along with its conversion rates into national provision for the re-introduction of the levying of currencies based on gold parities ; customs duties as soon as the said ceilings or maxi­ mum amounts are reached at Community level ;

Whereas, in accordance with Protocol 23 to the Act of Accession ( x ), the generalized tariff preference Whereas such method of administration calls for very scheme became fully applicable in the new Member close and particularly rapid cooperation between States on 1 January 1974 ; Member States and the Commission, which must, in particular, be able to observe the extent to which charges are made against the ceilings and maximum amounts and inform Member States thereof; whereas Whereas it is expedient, therefore, in respect of the such cooperation should be particularly close in view products referred to in Annex A which originate in of the need for the Commission to be able to take the countries and territories listed in Annex B, that appropriate measures to re-introduce the levying of the Community should allow, for each category of customs duties either generally or individually when these products and throughout 1977, duty-free any of the ceilings or maximum amounts are reached, imports within the limits of the Community ceilings calculated in the manner set out above ; whereas the benefit of such tariff exemption should be reserved for products originating in the countries and HAS ADOPTED THIS REGULATION : territories under consideration, the concept of 'originating products' being determined in accord­ ance with the procedure laid down in Article 14 of Article 1 Council Regulation (EEC ) No 802/68 of 27 June 1968 on the common definition of the concept of the 1 . From 1 January to 31 December 1977 , the Com­ origin of goods (2) ; whereas charges against each of mon Customs Tariff duties and , until 30 June 1977, these ceilings must, as a general rule, come within the customs duties of the new Member States on the a maximum Community amount of 50% in respect products listed in Annex A shall be totally of the products originating in any of the abovemen­ suspended , subject to the provisions of Articles 2 tioned countries ; whereas, however, in order in and 4 ( 2 ) of this Regulation . particular to safeguard access by all the

2. This suspension shall be enjoyed solely by pro­ ducts originating in the countries and territories í1) OJ No L 73 , 27. 3 . 1972 , p. 14. listed in Annex B. However, imports already enjoying (2) OJ No L 148 , 28 . 6. 1968 , p. 1 . exemption from customs duties under other preferen­

20 . 12 . 76 Official Journal of the European Communities No L 349/25

tial (tariff arrangements shall not be charged against levying of customs duties on imports of the products the ceilings specified in paragraph 3 . For the in question from all the countries concerned may at purposes of the application of this Regulation, the any time be re-introduced until the end of the period concept of originating products shall be determined referred to in Article 1 ( 1 ). in accordance with the procedure laid down in Article 14 of Regulation (EEC) No 802/68 . 2. As soon as the maximum amounts calculated in accordance with the provisions of Article 1 (4), which are laid down for Community imports of products 3 . Subject to the provisions of Articles 2 and 4 (2) originating in each of the countries referred to in and with the exception of certain products the value Article 1 (2), are reached for any one of these coun­ of the ceilings for which is given in Annex A, this tries at Community level, the levying of customs suspension shall be granted, in respect of each duties on imports of the products in question from category of products within a Community ceiling the country concerned may at any time be re-intro­ which shall 'be expressed in uniits of account and duced until the end of the period referred to in which shall be equal to the amount obtained by Article 1 ( 1 ). adding together the value of cif imports in 1974 of the products concerned, to the Community from the However, the first subparagraph shall not apply to countries and territories enjoying these arrangements, the imports in question originating in the countries excluding those already enjoying various preferential listed in Annex C. tariff arrangements granted by the Community, and 5% of the value of oif imports in 1974 from other countries and from countries and territories already Article 3 enjoying such arrangements. However the ceiling resulting from the sum of this addition may in no 1 . Imports of the products in question shall be case exceed 172-5% of that resulting from the substi­ charged against the Community ceilings and tution of the year 1971 for the year 1974 in the first maximum amounts as and when the products are term of the addition and of the year 1972 for the entered for home use, and provided that they are year 1974 in the second iterm of the addition . accompanied by a certificate of origin pursuant to the rules laid down in Article 1 (2). For the particular purpose of the abovementioned calculations, the statistics referring to the year 1974 expressed in EUR, are to be considered as being 2. Goods may be charged against a ceiling or maxi­ expressed in units of account of the Common mum amount only if the certificate of origin referred Customs Tariff. to in paragraph 1 is submitted before the date on which the levying of duties is re-introduced.

4. Subject to the provisions of Articles 2 and 4 (2), within each ceiling thus calculated, charges of 3 . The extent to which the ceilings and maximum products originating in any one of the countries listed amounts have been filled shall be determined at in Annex B should not exceed a Community maxi­ Community level on the basis of the imports charged mum amount equivalent to 50% of this ceiling with in accordance with paragraphs 1 and 2. the exception of certain products for which the maximum amount shall be reduced to the percentage or va'lue shown in Annex A. Article 4

1 . The Commission , in close cooperation with the 5 . Any amendment to Annex B, in particular by the Member States, shall take all necessary measures to addition of new countries enjoying tariff preferences, ensure that the above provisions are applied. may entail corresponding adjustments to the Com­ munity ceilings and the maximum amounts referred to in paragraphs 3 and 4. 2. The Commission shall re-introduce the levying of customs duties in respect of all the countries referred to in Article 1 (2) or in respect of any one of them by means of a Regulation in accordance with the Article 2 conditions laid down in Article 2(1 ) and ( 2).

1 . As soon as the ceilings fixed or calculated in Article 5 accordance with the provisions of Article 1 (3 ), which are laid down for Community imports of products originating in all of the countries referred to in Member States shall inform the Commission , on Article 1 (2 ), are reached at Community level , the request or at least monthly, of imports of the prod­

No L 349/26 Official Journal of the European Communities 20. 12 . 76

ucts in question actually charged against the Com- Article 6 munity ceilings and maximum amounts laid down in Article 1 (3) and (4). This Regulation shall enter into force on 1 January 1977 .

This Regulation shall be binding in its entirety and directly applicable in all Member States .

Done at Brussels, 13 December 1976 . For the Council The President M. van der STOEL

20. 12 . 76 Official Journal of the European Communities No L 349/27

ANNEX A

List of products originating in developing countries and territories, enjoying generalized tariff preferences, in respect of which duties under the Common Customs Tariff are totally suspended (a) (b)

CHAPTER 25

25.22 Quicklime, slaked lime and hydraulic lime, other than calcium oxide and hydroxide 25.23 Portland cement, ciment fondu, slag cement, supersulphate cement and similar hydraulic cements, whether or not coloured or in the form of clinker {')

25.31 A Fluorspar

CHAPTER 27

27.03 B Agglomerated peat

27.04 Coke and semi-coke of coal , of lignite or of peat : A. Of coal : I. For the manufacture of electrodes C. Other 27.05 Retort carbon

27.06 Tar distilled from coal, from lignite or from peat, and other mineral tars, including partially distilled tars and blends of pitch with creosote oils or with other coal tar distillation products

27.07 Oils and other products of the distillation of high temperature coal tar ; similar products as defined in Note 2 to this Chapter.

27.08 Pitch and pitch coke, obtained from coal tar or from other mineral tars

27.10 Petroleum oils and oils obtained from bituminous minerals, other than crude ; preparations not elsewhere specified or included, containing not less than 70% by weight of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations (2):

A. Light oils : III. For other purposes

B. Medium oils : III. For other purposes

C. Heavy oils : I. Gas oil : c) For other purposes II . Fuel oil : c) For other purposes

(a ) Manufactured and semi-finished industrial products qualifying under the ordinary arrangements for exemption or total temporary suspension of the Common Customs Tariff duty are only token entries as regards the Member States of the Community as originally constituted , whereas the exemption or suspension is directly and fully applicable by the new Member States under the present arrangements until 30 June 1977. As from 1 July 1977, the said products are only token entries as regards also the new Member States. ( b ) Preferences are not to be granted in respect of the products , marked with an asterisk , originating in Romania . (') For products falling within this heading, the Community ceiling referred to in Article 1 (3 ) is set at 687 000 u.a . (2) The Community ceiling as defined in Article 1 (3 ) is set at 703 500, 275 000 and 1 700 000 metric tons for products falling within subheadings 27.10 A III, B III, C I c), C II c) and C III c) and d) respectively ; the maximum Community amount referred to in Article 1 (4) is reduced to 20% for these products.

No L 349/28 Official Journal of the European Communities 20. 12 . 76

27.10 III. Lubricating oils ; other oils : (cont'd) c) To be mixed in accordance with the terms of Additional Note 7 to Chapter 27 d) For other purposes

27.11 Petroleum gases and other gaseous hydrocarbons

27.12 Petroleum jelly 27.13 Paraffin wax, micro-crystalline wax, slack wax, ozokerite, lignite wax, peat wax and other mineral waxes, whether or not coloured

27.14 Petroleum bitumen, petroleum coke and other residues of petroleum oils or of oils obtained from bituminous minerals 27.16 Bituminous mixtures based on natural asphalt, on natural bitumen , on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)

CHAPTER 28

ex 28.01 Halogens (fluorine, chlorine, bromine and iodine), excluding crude iodine 28.02 Sulphur, sublimed or precipitated ; colloidal sulphur

28.03 Carbon (including carbon black) ex 28.04 Hydrogen, rare gases and other non-metals, but not including selenium and silicon

28.06 Hydrochloric acid and .chlorosulphuric acid

28.07 Sulphur dioxide

28.08 Sulphuric acid ; oleum

28.09 Nitric acid ; sulphonitric acids 28.10 Phosphorus pentoxide and phosphoric acids (meta-, ortho- and pyro~) (*)

28.11 Arsenic trioxide, arsenic pentoxide and acids of arsenic

28.12 Boric oxide and boric acid

28.13 Other inorganic acids and oxygen compounds of non-metals (excluding water)

28.14 Halides, oxyhalides and other halogen compounds of non-metals

28.15 Sulphides of non-metals ; phosphorus trisulphide

28.16 Ammonia, anhydrous or in aqueous solution (*)

28.17 Sodium hydroxide (caustic soda); potassium hydroxide (caustic potash); peroxides of sodium or potassium

28.18 Oxides, hydroxides and peroxides of strontium, barium or magnesium

28.19 Zinc oxide and zinc peroxide 28.20 B Artificial corundum

28.21 Chromium oxides and hydroxides

28.22 Manganese oxides

(') For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 3 and (4) are set at 6 213 000 u.a . and 30% respectively .

20. 12. 76 Official Journal of the European Communities No L 349/29

28.23 Iron oxides and hydroxides ; earth colours containing 70% or more by weight of combined iron evaluated as Fe203

28.24 Cobalt oxides and hydroxides

28.25 Titanium oxides

28.26 Tin oxides (stannous oxide and stannic oxide)

28.28 Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases and metallic oxides, hydroxides and peroxides

28.29 Fluorides ; fluorosilicates, fluoroborates and other complex fluorine salts

28.30 Chlorides and oxychlorides

28.31 Chlorites and hypochlorites

28.32 Chlorates and perchlorates

28.33 Bromides, oxybromides, bromates and perbromates , and hypobromites

28.34 Iodides, oxyiodides, iodates and periodates

28.35 Sulphides ; polysulphides

28.36 Dithionites, including those stabilized with organic substances ; sulphoxylates

28.37 Sulphites and thiosulphates

28.38 Sulphates (including alums) and persulphates

28.39 Nitrites and nitrates

28.40 Phosphites, hypophosphites and phosphates

28.41 Arsenites and arsenates

28.42 Carbonates and percarbonates ; commercial ammonium carbonate containing ammonium carbamate

28.43 Cyanides and complex cyanides

28.44 Fulminates, cyanates and thiocyanates

28.45 Silicates ; commercial sodium and potassium silicates

28.46 Borates and perborates

28.47 Salts of metallic acids (for example, chromates, permanganates, stannates)

28.48 Other salts and peroxysalts of inorganic acids, but not including azides

28.49 Colloidal precious metals; amalgams of precious metals ; salts and other com­ pounds, inorganic or organic, of precious metals including albuminates, protein­ ates, tannates and similar compounds, whether or not chemically defined

28.50 Fissile chemical elements and isotopes ; other radio-active chemical elements and radio-active isotopes ; compounds, inorganic or organic, of such elements or isotopes, whether or > not chemically defined ; alloys, dispersions and cermets, containing any of these elements, isotopes or compounds: B. Other ( a)

(a ) Ex B : Artificial radio-active isotopes and their compounds ( EURATOM ).

No L 349/30 Official Journal of the European Communities 20. 12. 76

28.51 Isotopes and their compounds, inorganic or organic, whether or not chemically defined, other than isotopes and compounds falling within heading No 28.50 : B. Other

28.52 Compounds, inorganic or organic, of thorium, of uranium depleted in U 235 , of rare earth metals, of yttrium or of scandium, whether or not mixed together

28.53 Liquid air (whether or not rare gases have been removed); compressed air

28.54 Hydrogen peroxide (including solid hydrogen peroxide)

28.55 Phosphides 28.56 Carbides (for example, silicon carbide, boron carbide, metal carbides): A. Of silicon B. Of boron D. Of aluminium ; of chromium ; of molybdenum ; of tungsten ; of vanadium ; of tantalum ; of titanium E. Other 28.57 Hydrides, nitrides and azides, silicides and borides

28.58 Other inorganic compounds (including distilled and conductivity water and water of similar purity); amalgams, exept amalgams of precious metals

CHAPTER 29

29.01 Hydrocarbons

29.02 Halogenated derivatives of hydrocarbons 29.03 Sulphonated, nitrated or nitrosated derivatives of hydrocarbons

29.04 Acyclic alcohols and their halogenated, sulphonated, nitrated and nitrosated derivatives : A. Saturated monohydric alcohols (*) ( a ) B. Unsaturated monohydric alcohols C. Polyhydric alcohols : I. Diols, triols and tetraols IV. Other polyhydric alcohols V. Halogenated, sulphonated, nitrated or nitrosated derivatives of polyhydric alcohols

29.05 Cyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated deri­ vatives 29.06 Phenols and phenol-alcohols (*) (b ) 29.07 Halogenated, sulphonated, nitrated or nitrosated derivatives of phenols or pheno­ alcohols

29.08 Ethers, ether-alcohols, ether-phenols, ether-alcohol-phenols, alcohol peroxides and ether peroxides and their halogenated, sulphonated, nitrated or nitrosated deri­ vatives 29.09 Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a three or four member ring, and their halogenated, sulphonated, nitrated or nitrosated deriva­ tives 29.10 Acetals and hemiacetals and single or complex oxygen-function acetals and hemiacetals, and their halogenated, sulphonated, nitrated or nitrosated derivatives

(a) The asterisk covers only subheadings 29.04 A I and 29.04 A ex V (2-ethylexanol). (b) The asterisk covers only subheading 29.06 A I.

20. 12. 76 Official Journal of the European Communities No L 349/31

29.11 Aldehydes, aldehyde-alcohols, aldehyde-ethers, aldehyde-phenols and other single or complex oxygen-function aldehydes; cyclic polymers of aldehydes ; paraformal­ dehyde (*) ( a) 29.12 Halogenated, sulphonated, nitrated or nitrosated derivatives of products falling within heading No 29.11 29.13 Ketones, ketone-alcohols, ketone-phenols, ketone-aldehydes, quinones, quinone­ alcohols, quinone-phenols, quinone-aldehydes and other single or complex oxy­ gen-function ketones and quinones, and their halogenated , sulphonated , nitrated or nitrosated derivatives (*) (b ) 29.14 Monocarboxylic acids and their anhydrides, halides, peroxides and peracids , and their halogenated , sulphonated, nitrated or nitrosated derivatives (*) c) 29.15 Polycarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives (*) (d) 29.16 Carboxylic acids with alcohol, phenol, aldehyde or ketone function and other single or complex oxygen-function carboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives (*) 29.17 Sulphuric esters and their salts, and their halogenated, sulphonated, nitrated or nitrosated derivatives 29.18 Nitrous and nitric esters, and their halogenated, sulphonated, nitrated or nitro­ sated derivatives 29.19 Phosphoric esters and their salts, including lactophosphates, and their haloge­ nated, sulphonated, nitrated or nitrosated derivatives 29.20 Carbonic esters and their salts, and their halogenated, sulphonated , nitrated or nitrosated derivatives 29.21 Other esters of mineral acids (excluding halides) and their salts, and their halogenated , sulphonated, nitrated or nitrosated derivatives 29.22 Amine-function compounds ex 29.23 Single or complex oxygen-function amino-compounds, excluding glutamic acid and its salts 29.24 Quaternary ammonium salts and hydroxides ; lecithins and other phosphoamino­ lipins 29.25 Carboxyamide-function compounds ; amide-function compounds of carbonic acid 29.26 Carboxyimide-function compounds ( including ortho-benzoicsulphimide and its salts) and imine-function compounds ( including hexamethylenetetramine and trimethylenetrinitramine) 29.27 Nitrile-function compounds (*) (e) 29.28 Diazo-, azo- and azoxy-compounds 29.29 Organic derivatives of hydrazine or of hydroxylamine 29.30 Compounds with other nitrogen-functions 29.31 Organo-sulphur compounds 29.32 Organo-arsenic compounds 29.33 Organo-mercury compounds 29.34 Other organo-inorganic compounds 29.35 Heterocyclic compounds ; nucleic acids (2) 29.36 Sulphonamides 29.37 Sultones and sultams

(a) The asterisk covers only subheading 29.11 E ex I (4 -hydroxy-3-methoxylbenzo-3-hydro) (vanillin). ( b) The asterisk covers only subheading 29.13 A ex I (acetone). (c) The asterisk covers only subheading 29.14 D I. (d ) The asterisk covers only subheading 29.15 C I. (e) The asterisk covers only heading No ex 29.17 ( acrylonitrile). (1 ) For citric acid falling within subheading 29.16 A IV a), the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 376 000 u.a . and 30% respectively . (2) For melamine falling within subheading 29.35 ex Q , the Community ceiling referred to in Article 1 (3) is 486 000 u.a .

No L 349/32 Official Journal of the European Communities 20 . 12 . 76

29.38 Provitamins and vitamins, natural or reproduced by synthesis (including natural concentrates), derivatives thereof used primarily as vitamins, and intermixtures of the foregoing, whether or not in any solvent (*) (a)

29.39 Hormones, natural or reproduced by synthesis; .derivatives thereof, used primarily as hormones ; other steroids used primarily as hormones

29.40 Enzymes

29.41 Glycosides, natural or reproduced by synthesis, and their salts, ethers, esters and other derivatives

29.42 Vegetable alkaloids, natural or reproduced by synthesis, and their salts, ethers, esters and other derivatives

29.43 Sugars, chemically pure, other than sucrose, glucose and lactose ; sugar ethers and sugar esters, and their salts, other than products of heading Nos 29.39, 29.41 and 29.42

29.44 Antibiotics (*) (b)

29.45 Other organic compounds

CHAPTER 30

30.01 Organo-therapeutic glands or other organs, dried, whether or not powdered ; organo-therapeutic extracts of glands or other organs or of their secretions ; other animal substances prepared for therapeutic or prophylactic uses, not elsewhere specified or included

30.02 Arttisera; microbial vaccines, toxins, microbial cultures (including ferments but excluding yeasts) and similar products

30.03 Medicaments (including veterinary medicaments)

30.04 Wadding, gauze, bandages and similar articles (for example, dressings, adhesive plasters, poultices), impregnated or coated with pharmaceutical substances or put up in retail packings for medical or surgical purposes, other than goods specified in Note 3 of this Chapter

30.05 Other pharmaceutical goods

CHAPTER 31 31.02 Mineral or chemical fertilizers, nitrogenous : B. Urea, containing more than 45% by weight of nitrogen on the dry anhydrous product (*) (*) C. Other (*)

31.03 Mineral or chemical fertilizers, phosphatic (*)

31.04 B Mineral or chemical fertilizers, potassic, mentioned in Note 3(B) to this Chapter

31.05 Other fertilizers; goods of the present Chapter in tablets, lozenges and similar prepared forms or in packings of a gross weight not exceeding 10 kg: A. Other fertilizers : III. Containing the two fertilizing substances: nitrogen and potassium : a) Natural potassic sodium nitrate, consisting of a natural mixture of sodium nitrate and potassium nitrate (the proportion of the latter element may be as high as 44%), of a total nitrogen content not exceeding 16-3% by weight

(a) The asterisk covers only subheading 29.38 B ex II (vitamins B 12). (b) The asterisk covers only subheading 29.44 A (penicillins) and ex C (tetracycline). (*) For products falling within these subheadings, the maximum Community amount referred to in Article 1 (4) is reduced to 20% .

20. 12. 76 Official Journal of the European Communities No L 349/33

CHAPTER 32

32.02 Tannins (tannic acids), including water-extracted gall-nut tannin, and their salts, ethers, esters and other derivatives

32.03 Synthetic organic tanning substances and inorganic tanning substances ; tanning preparations, whether or not containing natural tanning materials ; enzymatic preparations for pre-tanning (for example, of enzymatic, pancreatic or bacterial origin)

32.04 Colouring matter of vegetable origin (including dyewood extract and other vegetable dyeing extracts, but excluding indigo) or of animal origin

32.05 Synthetic organic dyestuffs (including pigment dyestuffs); synthetic organic products of a kind used as luminophores ; products of the kind known as optical bleaching agents, substantive to the fibre; natural indigo

32.06 Colour lakes

32.07 Other colouring matter; inorganic products of a kind used as luminophores

32.08 Prepared pigments, prepared opacifiers and prepared colours, vitrifiable enamels and glazes, liquid lustres and similar products, of the kind used in the ceramic, enamelling and glass industries ; engobes (slips); glass frit and other glass, in the form of powder, granules or flakes

32.09 Varnishes and lacquers ; distempers ; prepared water pigments of the kind used for finishing leather; paints and enamels ; pigments in linseed oil, white spirit, spirits of turpentine, varnish or other paint or enamel media ; stamping foils; dyes or other colouring matter in forms or packings of a kind sold by retail

32.10 Artists', students' and signboard painters' colours, modifying tints, amusement colours and the like, in tables, tubes, jars, bottles, pans or in similar forms or packings, including such colours in sets or outfits, with or without brushes, palettes or other accessories

32.11 Prepared driers

32.12 Glaziers' putty ; grafting putty ; painters' fillings ; non-refractory surfacing pre­ parations; stopping, sealing and similar mastics, including resin mastics and cements

32.13 Writing ink, printing ink and other inks

CHAPTER 33 ESSENTIAL OILS AND RESINOIDS ; PERFUMERY, COSMETICS AND TOILET PREPARATIONS

CHAPTER 34 SOAP, ORGANIC SURFACE-ACTIVE AGENTS, WASHING PREPARATIONS, LUBRICATING PREPARATIONS, ARTIFICIAL WAXES, PREPARED WAXES, POLISHING AND SCOURING PREPARATIONS, CANDLES AND SIMILAR ARTICLES, MODELLING PASTES AND 'DENTAL WAXES'

CHAPTER 35

35.02 B Albuminates and other albumin derivatives

35.03 Gelatin (including gelatin in rectangles, whether or not coloured or surface­ worked) and gelatin derivatives ; glues derived from bones, hides, nerves, tendons or from similar products, and fish glues ; isinglass (')

35.04 Peptones and other protein substances and their derivates ; hide powder, whether or not chromed

35.06 Prepared glues not elsewhere specified or included ; products suitable for use as glues put up for sale by retail as glues in packages not exceeding a net weight of lkg

f1 ) For gelatin and gelatin derivatives falling within subheading 35.03 ex B , the maximum Community amount referred to in Article 1 (4) is reduced to 30®/o .

No L 349/34 Official Journal of the European Communities 20. 12 . 76

CHAPTER 36 EXPLOSIVES ; PYROTECHNIC PRODUCTS ; MATCHES ; PYROPHORIC ALLOYS ; CERTAIN COMBUSTIBLE PREPARATIONS (*) (a)

CHAPTER 37 PHOTOGRAPHIC AND CINEMATOGRAPHIC GOODS

CHAPTER 38

38.01 Artificial graphite ; colloidal graphite, other than suspensions in oil

38.02 Animal black ( for example, bone black and ivory black), including spent animal black

38.03 Activated carbon (decolourizing, depolarizing or adsorbent); activated diatomite, activated clay, activated bauxite and other activated natural mineral products

38.04 Ammoniacal gas liquors and spent oxide produced in coal gas purification 38.05 Tall oil

38.06 Concentrated sulphite lye

38.07 Spirits of turpentine (gum , wood and sulphate) and other terpenic solvents produced by the distillation or other treatment of coniferous woods ; crude dipentene; sulphite turpentine; pine oil (excluding 'pine oils' not rich in terpineol)

38.08 Rosin and resin acids, and derivatives thereof other than ester gums included in heading No 39.0.5 ; rosin spirit and rosin oils 38.09 Wood tar ; wood tar oils (other than the composite solvents and thinners falling within heading No 38.18 ); wood creosote ; wood naphtha ; acetone oil 38.10 Vegetable pitch of all kinds ; brewers' pitch and similar compounds based on rosin or on vegetable pitch ; foundry core binders based on natural resinous products

38.11 Disinfectants, insecticides, fungicides, weed-killers, anti-sprouting products, rat poisons and similar products, put up in forms or packings for sale by retail or as preparations or as articles (for example, sulphur-treated bands, wicks and candles, fly-papers)

38.12 Prepared glazings, prepared dressings and prepared mordants, of a kind used in the textile, paper, leather or like industries : , A. Prepared glazings and prepared dressings : II . Other B. Prepared mordants 38.13 Pickling preparations for metal surfaces ; fluxes and other auxiliary preparations for soldering, brazing or welding ; soldering, brazing or welding powders and pastes consisting of metal and other materials ; preparations of a kind used as cores or coatings for welding rods and electrodes

38.14 Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity impro­ vers , anti-corrosive preparations and similar prepared additives for mineral oils

38.15 Prepared rubber accelerators 38.16 Prepared culture media for development of micro-organisms

38.17 Preparations and charges for fire-extinguishers ; charged fire-extinguishing grenades 38.18 Composite solvents and thinners for varnishes and similar products

ex 38.19 Chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included ; residual products of the chemical or allied industries, not elsewhere specified or included , excluding sorbitol , other than that falling within subheading 29.04 C III

( a) The asterisk covers only heading No 36.06 .

20. 12 . 76 Official Journal of the European Communities No L 349/35

CHAPTER 39

39.01 Condensation, polycondensation and polyaddition products, whether or not modified or polymerized, and whether or not linear (for example, phenoplasts, aminoplasts, alkyds, polyAllyl esters, and other unsaturated polyesters, silicones)

39.02 Polymerization and copolymerization products (for example, polyethylene, polytetrahaloethylenes, polyisobutylene, polystyrene, polyvinyl chloride, poly­ vinyl acetate, polyvinyl cnloroacetate and other polyvinyl derivatives, poly­ acrylic and polymethacrylic derivatives, coumarone-indene resins) (*) (a)

39.03 Regenerated cellulose ; cellulose nitrate, cellulose acetate and other cellulose esters, cellulose ethers and other chemical derivatives of cellulose, plasticized or not (for example, collodions, celluloid); vulcanized fibre (*): A. Adhesive strips of a width not exceeding 10 cm, the coating of which consists of unvulcanized natural or synthetic rubber B. Other : III . Cellulose acetates IV. Other cellulose esters V. Cellulose ethers and other chemical derivatives of cellulose VI . Vulcanized fibre

39.04 . Hardened proteins (for example, hardened casein and hardened gelatin)

39.05 Natural resins modified by fusion (run gums); artificial resins obtained by esterification of natural resins or of resinic acids (ester gums ); chemical derivatives of natural rubber (for example, chlorinated rubber, rubber hydrochloride, oxi­ dized rubber, cyclized rubber) 39.06 Other high polymers, artificial resins and artificial plastic materials, including alginic acid, its salts and esters ; linoxyn

39.07 Articles of materials of the kinds described in heading Nos 39.01 to 39.06 (*)

CHAPTER 40

40.02 Synthetic rubber latex ; pre-vulcanized synthetic rubber latex ; synthetic rubber : factice derived from oils

40.03 Reclaimed rubber

40.05 Plates, sheets and strip, of unvulcanized natural or synthetic rubber, other than smoked sheets and crepe sheets of heading No 40.01 or 40.02 ; granules of un­ vulcanized natural or synthetic rubber compounded ready for vulcanization ; unvulcanized natural or synthetic rubber, compounded before or after coagu­ lation either with carbon black (with or without the addition of mineral oil ) or with silica (with or without the addition of mineral oil ), in any form , of a kind known as masterbatch

40.06 Unvulcanized natural or synthetic rubber, including rubber latex, in other forms or states (for example, rods, tubes and profile shapes, solutions and dispersions); articles of unvulcanized natural or synthetic rubber (for example, coated or impregnated textile thread ; rings and discs)

40.07 Vulcanized rubber thread and cord, whether or not textile covered, and textile thread covered or impregnated with vulcanized rubber 40.08 Plates, sheets, strip, rods and profile shapes, of unhardened vulcanized rubber

40.09 Piping and tubing, of unhardened vulcanized rubber

40.10 Transmission, conveyor or elevator belts or belting, of vulcanized rubber

40.11 Rubber tyres , tyre cases , interchangeable tyre treads , inner tubes and tyre flaps , for wheels of all kinds (M (*)

(a ) The asterisk covers only subheadings 39.02 C I, C. IV and C VII a). (') For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 14 457 000 u.a . and 15% respectively.

No L 349/36 Official Journal of the European Communities 20. 12. 76

40.12 Hygienic and pharmaceutical articles (including teats), of unhardened vulcan­ ized rubber, with or without fittings of hardened rubber

40.13 Articles of apparel and clothing accessories (including gloves), for all purposes, of unhardened vulcanized rubber

40.14 Other articles of unhardened vulcanized rubber

40.15 Hardened rubber (ebonite and vulcanite), in bulk, plates, sheets, strip, rods, profile shapes or tubes ; scrap , waste and powder, of hardened rubber

40.16 Articles of hardened rubber (ebonite and vulcanite)

CHAPTER 41

41.02 Bovine cattle leather (including buffalo leather) and equine leather, except leather falling within heading No 41.06, 41.07 or 41.08 : A. East India kip, whole, whether or not the heads and legs have been removed, weighing each not more than 4-5 kg net, not further prepared than vegetable tanned, whether or not having undergone further preservative treatment with oil , but obviously unsuitable for immediate use in the manufacture of leather articles

41.03 Sheep and lambskin leather, except leather falling within heading No 41.06, 41.07 or 41.08 : A. Of Indian hair sheep , not further prepared than vegetable tanned, whether or not having undergone further preservative treatment with oil , but obviously unsuitable for immediate use in the manufacture of leather articles

B. Other : II . Other i1)

41.04 Goat and kidskin leather, except leather falling within heading No 41.06, 41.07 or 41.08 : A. Of Indian goat or kid, not further prepared than vegetable tanned, whether or not having undergone further preservative treatment with oil, but obviously unsuitable for immediate use in the manufacture of leather articles B. Other : II . Other (2)

41.05 Other kinds of leather, except leather falling within heading No 41.06, 41.07 or 41.08 : A. Of reptiles, not further prepared than vegetable tanned, whether or not having undergone further preservative treatment with oil , but obviously unsuitable for immediate use in the manufacture of leather articles B. Other : II. Other (3)

41.06 Chamois-dressed leather

41.07 Parchment-dressed leather

41.08 Patent leather and imitation patent leather ; metallized leather

41.10 Composition leather with a basis of leather or leather fibre, in slabs, in sheets or in rolls

(') For products falling within this subheading, the Community ceiling referred to in Article 1 (3 ) is set at 2 558 000 u.a . (2) For products falling within this subheading, the Community ceiling referred to in Article 1 (3 ) is set at 3 953 000 u.a . (3) For products falling within this subheading the cciling and the maximum Community amount referred to in Article 1 (3 ) and (3 ) are set respectively at 9 540 000 u.a . and 20°/o .

20. 12. 76 Official Journal of the European Communities No L 349/37

CHAPTER 42 42.01 Saddlery and harness,, of any material ( for example, saddles, harness, collars, traces, knee-pads and boots), for any kind of animal 42.03 Articles of apparel and clothing accessories, of leather or of composition leather: B. Gloves, including mittens and mitts : I. Protective, for all trades (*) (*) 42.04 Articles of leather or of composition leather of a kind used in machinery or mechanical appliances or for industrial purposes

42.05 Other articles of leather or of composition leather

42.06 Articles made from gut (other than silk-worm gut), from goldbeater's skin, from bladders or from tendons

CHAPTER 43 43.02 Furskins, tanned or dressed, including furskins assembled in plates, c'rosses and similar forms ; pieces or cuttings, of furskin, tanned or dressed , including heads, paws, tails and the like ( not being fabricated )

43.03 Articles of furskin (*) (a)

43.04 Artificial iur and articles made thereof

CHAPTER 44 ex 44.02 Coconut charcoal

44.05 Wood sawn lengthwise, sliced or peeled, but not further prepared, of a thickness exceeding 5 mm

44.06 Wood paving blocks

44.07 Railway or tramway sleepers of wood

44.08 Riven staves of wood, not further prepared than sawn on one principal surface ; sawn staves of wood , of which at least one principal surface has been cylindrically sawn , not further prepared than sawn

44.09 Hoopwood ; split poles ; piles, pickets and stakes of wood, pointed but not sawn lengthwise ; chipwood ; pulpwood in chips or particles ; wood shavings of a kind suitable for use in the manufacture of vinegar or for the clarification of liquids

44.10 Wooden sticks, roughly trimmed but not turned, bent or otherwise worked , suit­ able for the manufacture of walking-sticks, whips , golf-club shafts, umbrella handles, tool handles or the like

44.11 Drawn wood ; match splints ; wooden pegs or pins for footwear

44.12 Wood wool and wood flour

44.13 Wood (including blocks, strips and friezes for parquet or wood block flooring, not assembled ), planed, tongued, grooved, rebated, chamfered, V-jointed , centre V-jointed , beaded , centre-beaded or the like , but not further manufactured (2)

44.14 Wood sawn lengthwise, sliced or peeled but not further prepared, of a thickness not exceeding 5 mm ; veneer sheets and sheets for plywood , of a thickness not exceeding 5 mm : A. Small boards for the manufacture of pencils B. Other (3 ) (*)

(a ) The asterisk covers only subheading 43.03 ex B (gloves). (*) For products falling within this subheading, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 15 790 000 u.a . and 20% respectively. (s) For products falling within this heading, the Community ceiling referred to in Article 1 (3 ) is set at 6 547 500 u.a. (3) For products falling within this subheading, the maximum Community amount referred to in Article 1 (4) is reduced to 40% .

No L 349/38 Official Journal of the European Communities 20. 12 . 76

44.16 Cellular wood panels, whether or hot faced with base metal 44.17 ' Improved' wood , in sheets, blocks or the like 44.18 Reconstituted wood, being wood shavings, wood chips, sawdust, wood flour or other ligneous waste agglomerated with natural or artificial resins or other organic binding substances, in sheets, blocks or the like (*) 44.19 Wooden headings and mouldings , including moulded skirting and other moulded boards 44.20 Wooden picture frames, photograph frames, mirror frames and the, like 44.21 Complete wooden packing cases, boxes, crates, drums and similar packings 44.22 Casks, barrels, vats, tubs, buckets and other coopers' products and parts thereof, of wood , other than staves falling within heading No 44.08 44.23 Builders' carpentry and joinery (including prefabricated and sectional buildings and assembled parquet flooring panels ) (*) 44.24 Household utensils of wood (*) ( a) 44.25 Wooden tools, tool bodies, tool handles, broom and brush bodies and handles ; boot and shoe lasts and trees, of wood (2) 44.26 Spools, cops, bobbins, sewing thread reel and the like, of turned wood 44.27 Standard lamps, table lamps and other lighting fittings, of wood ; articles of furniture, of wood, not falling within Chapter 94 ; caskets, cigarette boxes, trays, fruit bowls, ornaments and other fancy articles, of wood ; cases for cutlery, for drawing instruments or for violins, and similar receptacles, of wood ; articles of wood for personal use or adornment, of a kind normally carried in the pocket, in the handbag or on the person ; parts of the foregoing articles, of wood 44.28 Other articles of wood

CHAPTER 45

45.02 Natural cork in blocks, plates, sheets or strips ( including cubes or square slabs, cut to size for corks or stoppers ) 45.03 Articles of natural cork ( ) 45.04 Agglomerated cork ( being cork agglomerated with or without a binding substance) and articles of agglomerated cork (4)

CHAPTER 46

46.01 Plaits and similar products of plaiting materials, for all uses, whether or not assembled into strips 46.02 Plaiting materials ( other than products falling within heading No 46.01 ) bound together in parallel strands or woven in sheet form , including matting, mats and screens ; straw envelopes for bottles (5) 46.03 Basketwork , wickerwork and other articles of playing materials, made directly to shape ; articles made up from goods falling within heading No 46.01 or 46.02 ; articles of loofah (6) (*)

CHAPTER 47

47.01 Pulp derived by mechanical or chemical means from any fibrous vegetable material 47.02 Waste paper* and paperboard ; scrap articles of paper or of paperboard, fit only for use in paper-making ; A. Waste paper and paperboard

(a) The asterisk covers only heading No 44.24 (clothes-pegs). (') For products falling within this heading, the Community ceiling referred to in Article 1 (3) is set at 10 147 000 u.a . (2) For products falling within this heading, the maximum Community amount referred to in Article 1 (4) is reduced to 30 % . (3) for products falling within this heading , the Community ceiling referred to in Article 1 (3 ) is set at 2 094 000 u.a . (') For products falling within this heading , the Community ceiling referred to in Article 1 (3 ) is set at 1 651 000 u.a . (5) For products falling within this heading , the maximum Community amount referred to in Article 1 (4) is reduced to 30% . (") For products falling within this heading, the maximum Community amount referred to in Article 1 (4) is reduced to 20% .

20. 12 . 76 Official Journal of the European Communities No L 349/ 39

CHAPTER 48

48.01 Paper and paperboard (including cellulose wadding), machine-made, in rolls or sheets :

A. Newsprint

B. Cigarette paper

C. Kraft paper and kraft board : I. For the manufacture of paper yarn of heading No 57.08 or of paper yarn reinforced with metal of heading No_ 59.04 D. Paper weighing not more than 15 g/m2 for use in stencil making

E. Other

48.02 Hand-made paper and paperboard

48.03 Parchment or greaseproof paper and paperboard, and imitations thereof, and glazed transparent paper, in rolls or sheets

48.04 Composite paper or paperboard (made by sticking flat layers together with an adhesive), not surface-coated or impregnated, whether or not internally rein­ forced , in rolls or sheets

48.05 Paper and paperboard, corrugated (with or without flat surface sheets ), creped, crinkled, embossed or perforated, in rolls or sheets

48.06 Paper and paperboard, ruled, lined or squared, but not otherwise printed, in rolls or sheets

48.07 Paper and paperboard, impregnated, coated, surface-coloured, surface-decorated or printed (not being merely ruled, lined or squared and not constituting printed matter within Chapter 49 ), in rolls or sheets

48.08 Filter blocks, slabs and plates, of paper pulp

48.09 Building board of wood pulp or of vegetable fibre, whether or not bonded with natural or artificial resins or with similar binders (*) (*)

48.10 Cigarette paper, cut to size, whether or not in the form of booklets or tubes

48.11 Wallpaper and lincrusta ; window transparencies of paper

48.12 Floor coverings prepared on a base of paper or of paperboard, whether or not cut to size, with or without a coating of linoleum compound

48.13 Carbon and other copying papers ( including duplicator stencils ) and transfer papers, cut to size, whether or not put up in boxes

48.14 Writing blocks, envelopes, letter cards, plain postcards, correspondence cards ; boxes, pouches, wallets and writing compendiums , of paper or paperboard , containing only an assortment of paper stationery

48.15 Other paper and paperboard, cut to size or shape

48.16 Boxes, bags and other packing containers, of paper or paperboard

48.17 Box files, letter trays, storage boxes and similar articles, ot paper or paperboard , of a kind commonly used in offices, shops and the like

(l) For products falling within this heading, the ceiling and the maximum Community amount referred in to Article 1 ( 3 ) and (4) are set at 9 870 000 u.a . and 30 % respectively .

No L 349/40 Official Journal of the European Communities 20. 12 . 76

48.18 Registers , exercise books, note books, memorandum blocks, order books, receipt books, diaries , blotting-pads, binders ( loose-leaf or other), file covers and other stationery of paper or paperboard ; sample and other albums and book covers, of paper or paperboard

48.19 Paper or paperboard labels , whether or not printed or gummed

48.20 Bobbins , spools, cops and similar supports of paper pulp, paper or paperboard ( whether or not perforated or hardened )

48.21 Other articles of paper pulp, paper, paperboard or cellulose wadding

CHAPTER 49 PRINTED BOOKS , NEWSPAPERS , PICTURES AND OTHER PRODUCTS OF THE PRINTING INDUSTRY ; MANUSCRIPTS , TYPESCRIPTS AND PLANS

CHAPTER 64

64.03 Footwear with outer soles of wood or cork (*)

64.04 Footwear with outer soles of other materials (*)

64.05 Parts of footwear, removable in-soles, hose protectors and heel cushions, of any material except metal (*)

64.06 Gaiters , spats , leggings , puttees , cricket pads, shin-guards and similar articles, and parts thereof (*)

CHAPTER 65 HEADGEAR AND PARTS THEREOF

CHAPTER 66

66.01 Umbrellas and sunshades (including walking-stick umbrellas , umbrella tents , and garden and similar umbrellas') (') (*)

66.02 Walking-sticks ( including climbing-sticks and seat-sticks), canes, whips, riding­ crops and the like

66.03 Parts, fittings, trimmings and accessories of articles falling within heading No 66.01 or 66.02

CHAPTER 67 67.01 Skins and other parts of birds with their feathers or down, feathers, parts of feathers, down, and articles thereof ( other than goods falling within heading No 05.07 and worked quills and scapes )

67.02 Artificial flowers, foliage or fruit and parts thereof; articles made of artificial flowers, foliage or fruit

67.03 Human hair, dressed, thinned , bleached or otherwise worked ; wool or other animal hair prepared for use in making wigs and the like

67.05 Fans and hand screens, non-mechanical, of any material ; frames and handles therefor and parts of such frames and handles, of any material

CHAPTER 68 ARTICLES OF STONE, OF PLASTER, OF CEMENT, OF ASBESTOS , OF MICA AND OF SIMILAR MATERIALS (* V(a ) (2) (3)

(a) The asterisk covers only heading No 68.01 . (l) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 ( 3 ) and (4 ) are set at 9 027 000 u.a . and 15% respectively . (8) For products falling within subheading 68.13 B I the maximum Community amount referred to in Article 1 (4) is reduced to 40% . (3 ) For products falling within subheadings 68.13 B II and III , the maximum Community amount referred to in Article 1 ( 4 ) is reduced to 40 % .

20. 12. 76 Official Journal of the European Communities No L 349/41

CHAPTER 69

69.01 Heat-insulating bricks, blocks, tiles and other heat-insulating goods of siliceous fossil meals or of similar siliceous earths (for example, kieselguhr, tripolite or diatomite)

69.03 Other refractory goods (for example, retorts, crucibles, muffles, ndzzles, plugs, supports, cupels, tubes, pipes, sheaths and rods), other than goods falling within heading No 69.01

69.04 Building bricks ( including flooring blocks, support or filler tiles and the like )

69.05 Roofing tiles ; chimney-pots, cowls, chimney-liners, cornices and other construc­ tional goods, including architectural ornaments

69.06 Piping, conduits and guttering ( including angles, bends and similar fittings )

69.07 Unglazed setts, flags and paving, hearth and wall tiles (*)

69.08 Glazed setts, flags and paving, hearth and wall tiles (') (*)

69.09 Laboratory, chemical or industrial wares ; troughs, tubs and similar receptacles of a kind used in agriculture ; pots, jars and similar articles of a kind commonly used for the conveyance or packing of goods

69.10 Sinks, washbasins, bidets, water closet pans, urinals, baths and like sanitary fixtures

69.11 Tableware and other articles of a kind commonly used for domestic or toilet purposes (2) (*)

69.12 Tableware and other articles of a kind commonly used for domestic or toilet purposes, of other kinds of pottery (*) ( a )

69.13 Statuettes and other ornaments, and articles of personal adornment ; articles of furniture

69.14 Other articles

CHAPTER 70

70.01 Waste glass ( cullet); glass in the mass (excluding optical glass )

70.02 Glass of the variety known as ' enamel ' glass , in the mass, rods and tubes

70.03 Glass in balls , rods and tubes, unworked ( not being optical glass )

70.04 Unworked cast or rolled glass (including flashed or wired glass), whether figured or not, in rectangles

70.06 Cast, rolled, drawn or blown glass (including flashed or wired glass ), in rectangles , surface ground or polished, but not further worked

(a ) I he asterisk covers only subheading 69.12 C. (') For products falling within this heading , the maximum Community amount referred to in Article 1 (4) is reduced to 20% . (J) For products falling within this heading , the ceiling and the maximum Community amount referred to in Article 1 (3) and (4) are set at 1 291 000 u.a . and 30°/<> respectively .

No L 349/42 Official Journal of the European Communities 20. 12 . 76

70.07 Cast, rolled, drawn or blown glass (including flashed or wired glass) cut to shape other than rectangular shape, or bent or otherwise worked (for example, edge worked or engraved), whether or not surface ground or polished ; multiple-walled insulating glass ; leaded lights and the like

70.08 Safety glass consisting of toughened or laminated glass, shaped or not

70.09 Glass mirrors (including rear-view mirrors), unframed, framed or backed

70.10 Carboys, bottles, jars, pots, tubular containers and similar containers, of glass, of a kind commonly used for the conveyance or packing of goods ; stoppers and other closures, of glass (*) ( a)

70.11 Glass envelopes (including bulbs and tubes) for electric lamps, electronic valves or the like

70.12 ' Glass inners for vacuum flasks or for other vacuum vessels (1 )

70.14 Illuminating glassware, signalling glassware and optical elements of glass, not optically worked nor of optical glass: A. Articles for electrical lighting fittings : I. Facetted glass, plates, balls, pear-shaped drops, flower-shaped pieces, pendants and similar articles for trimming chandeliers II. Other (for example, diffusers, ceiling lights, bowls, cups, lampshades, globes, tulip-shaped pieces) (2 )

B. Other (3 )

70.15 Clock and watch glasses and similar glasses (including glass of a kind used for sunglasses but excluding glass suitable for corrective lenses), curved, bent, hollowed and the like ; glass spheres and segments of spheres, of a kind used for the manufacture of clock and watch glasses and the like

70.16 Bricks, tiles, slabs, paving blocks, squares and other articles of pressed or moulded glass, of a kind commonly used in buildings; multi-cellular glass in blocks, slabs, plates, panels and similar forms

70.17 Laboratory, hygienic and pharmaceutical glassware, whether or not graduated or calibrated ; glass ampoules

70.18 Optical glass and elements of optical glass, other than optically worked elements ; blanks for corrective spectacle lenses

70.19 Glass beads, imitation pearls, imitation precious and semi-precious stones, frag­ ments and chippings, and similar fancy or decorative glass smallwares, and articles of glassware made therefrom ; glass cubes and small glass plates, whether or not on a backing, for mosaics and similar decorative purposes ; artificial eyes of glass, including those for toys but excluding those for wear by humans ; orna­ ments and other fancy articles of lamp-worked glass ; glass grains (ballotini )

70.20 Glass fibre (including wool ), yarns, fabrics, and articles made therefrom

70.21 Other articles of glass

(a) The asterisk covers only heading No ex 70.10 (carboys , bottles and jars, of unworked glass of a capacity exceeding 0-25 litre but not exceeding 2-5 litres). (') For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 289 000 u.a . and 40% respectively. (2) For products falling within this subheading, the maximum Community amount referred to in Article 1 (4) is reduced to 20°/». (3) For products falling within this subheading, the maximum Community amount referred to in Article 1 (4) is reduced to 30°/o .

20. 12 . 76 Official Journal of the European Communities No L 349/43

CHAPTER 71

71.01 Pearls, unworked or worked, but not mounted, set or strung (except ungraded pearls temporarily strung for convenience of transport)

71.02 Precious and semi-precious stones, unworked, cut or otherwise worked, but not mounted, set or strung (except ungraded stones temporarily strung for convenience of transport)

71.03 Synthetic or reconstructed precious or semi-precious stones, unworked, cut or otherwise worked, but not mounted, set or strung (except ungraded stones temporarily strung for convenience of transport)

ex 71.05 Silver, including silver gilt and platinum-plated silver, semi-manufactured

71.06 Rolled silver, unworked or semi-manufactured

ex 71.07 Gold, including platinum-plated gold, semi-manufactured

71.08 Rolled gold on base metal or silver, unworked or semi-manufactured

ex 71.09 Platinum and other metals of the platinum group, semi-manufactured

71.10 Rolled platinum or other platinum group metals, on base metal or precious metal, unworked or semi-manufactured

71.12 Articles of jewellery and parts thereof, of precious metal or rolled precious metal

71.13 Articles of goldsmiths' or silversmiths' wares and parts thereof, of precious metal or rolled precious metal, other than goods falling within heading No 71.12

71.14 Other articles of precious metal or rolled precious metal

71.15 Articles consisting of, or incorporating, pearls, precious or semi-precious stones (natural, synthetic or reconstructed)

CHAPTER 73

73.04 Shot and angular grit, of iron or steel, whether or not graded ; wire pellets of iron or steel

73.05 A Iron or steel powders

73.07 Blooms, billets, slabs and sheet bars (including tinplate bars), of iron or steel ; pieces roughly shaped by forging, of iron or steel : A. Blooms and billets : II. Forged B. Slabs and sheet bars (including tinplate bars): II. Forged C. Pieces roughly shaped by forging

73.10 Bars and rods (including wire rod), of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished (including precision-made); hollow mining drill steel : B. Not further worked than forged C. Not further worked than cold-formed or cold-finished D. Clad or surface-worked (for example, polished, coated): I. Not further worked than clad : b) Cold-formed or cold-finished II . Other

No L 349/44 Official Journal of the European Communities 20. 12 . 76

73.11 Angles, shapes and sections, of iron or steel, hot-rolled, forged, extruded, cold­ formed or cold-finished ; sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements : A. Angles, shapes and sections : II. Not further worked than forged III. Not further worked than cold-formed or cold-finished IV, Clad or surface-worked (for example, polished, coated): a) Not further worked than clad : 2 . Cold-formed or cold-finished b ) Other

73.12 Hoop and strip, of iron or steel, hot-rolled or cold-rolled : B. Not further worked than cold-rolled : II. Other C. Clad, coated or otherwise surface-treated : I. Silvered, gilded or platinum-plated II . Enamelled III. Tinned : b ) Other IV. Zinc-coated or lead-coated V. Other (for example, copper-plated, artificially oxidized, lacquered, nickel­ plated, varnished, clad, parkerized, printed): a) Not further worked than clad : 2 . Cold-rolled b) Other D. Otherwise shaped or worked (for example, perforated, chamfered, lap-jointed)

73.13 Sheets and plates, of iron or steel, hot-rolled or cold-rolled : B. Other sheets and plates : II . Not further worked than cold-rolled, of a thickness of: a) 3 mm or more IV. Clad, coated or otherwise surface-treated : a) Silvered, gilded, platinum-plated or enamelled V. Otherwise shaped or worked : a) Cut into shapes other than rectangular shapes, but not further worked : 1 . Silvered, gilded, platinum-plated or enamelled b) Other, excluding sheets and plates shaped by rolling

73.14 Iron or steel wire, whether or not coated, but not insulated

73.15 Alloy steel and high carbon steel in the form mentioned in heading Nos 73.06 to 73.14 : A. High carbon steel : I. Ingots, blooms, billets, slabs and sheet bars : a) Forged II. Pieces roughly shaped by forging V. Bars and rods ( including wire rod) and hollow mining drill steel ; angles, shapes and sections : a) Not further worked than forged c) Not further worked than cold-formed or cold-finished d) Clad or surface-worked (for example, polished, coated): 1 . Not further worked than clad : bb) Cold-formed or cold-finished 2. Other

20. 12 . 76 Official Journal of the European Communities No L 349/45

73.15 VI. Hoop and strip : (confd) b) Not further worked than cold-rolled c) Clad, coated or otherwise surface-treated: 1 . Not further worked than clad : bb ) Cold-rolled 2. Other d) Otherwise shaped or worked (for example, perforated, chamfered, lap-jointed)

VII. Sheets and plates : b) Not further worked than cold-rolled, of a thickness of: 1 . 3 mm or more d) Otherwise shaped or worked : 2 . Other , excluding sheets and plates shaped by rolling VIII. Wire, whether or not coated, but not insulated

B. Alloy steel : I. Ingots, blooms, billets, slabs and sheet bars : a) Forged II. Pieces roughly shaped by forging V. Bars and rods (including wire rod) and hollow mining drill steel ; angles, shapes and sections : a) Not further worked than forged c) Not further worked than cold-formed or cold-finished d) Clad or surface-worked (for example, polished, coated): 1 . Not further worked than clad : bb) Cold-formed or cold-finished 2 . Other

VI. Hoop and strip : b) Not further worked than cold-rolled c) Clad, coated or otherwise surface-treated : 1 . Not further worked than clad : bb) Cold-rolled 2 . Other d) Otherwise shaped or worked (for example, perforated, chamfered, lap-jointed)

VII. Sheets and plates : b ) Other sheets and plates : 2. Not further worked than cold-rolled, of a thickness of: aa) 3 mm or more 4. Otherwise shaped or worked : bb) Other, excluding sheets and plates shaped by rolling

VIII. Wire, whether or not coated, but not insulated

73.16 Railway and tramway track construction material of iron or steel, the following: rails, check-rails, switch blades, crossings (or frogs), crossing pieces, point rods, rack rails, sleepers, fish-plates, chairs, chair wedges, sole plates, (base plates), rail clips, bedplates, ties and other material specialized for joining or fixing rails : A. Rails : I. Current-conducting, with parts of non-ferrous metal D. Fish-plates and sole plates : II. Other

E. Other

73.17 Tubes and pipes, of cast iron (*)

No L 349/46 Official Journal of the European Communities 20. 12 . 76

73.19 High-pressure hydro-electric conduits of steel, whether or not reinforced

73.20 Tube and pipe fittings (for example, joints, elbows, unions and flanges ), of iron or steel (*)

73.21 Structures and parts of structures ( for example, hangars and other buildings, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame­ works , door and window frames, shutters, balustrades, pillars and columns ), of iron or steel ; plates, strip, rods, angles, shapes, sections, tubes and the like, pre­ pared for use in structures, of iron or steel

73.22 Reservoirs, tanks, vats and similar containers, for any material ( other than com­ pressed or liquefied gas), of iron or steel, of a capacity exceeding 300 litres, whether or not lined or head-insulated, but not fitted with mechanical or thermal equipment

73.23 Casks , drums, cans, boxes and similar containers, or sheet or plate iron or steel , of a description commonly used for the conveyance or packing of goods

73.24 Containers, of iron or steel , for compressed or liquefied gas

73.25 Stranded wire, cables, cordage, ropes, plaited bands, slings and the like, of iron or steel wire, but excluding insulated electric cables

73.26 Barbed iron or steel wire ; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of kinds used for fencing, of iron or steel

73.27 Gauze , cloth , grill , netting, fencing, reinforcing fabric and similar materials, of iron or steel wire

73.28 Expanded metal, of iron or steel

73.29 Chain and parts thereof, of iron or steel

73.30 Anchors and grapnels and parts thereof, of iron or steel

73.31 Nails, tacks, staples , hook-nails, corrugated nails, spiked cramps, studs, spikes and drawing pins, of iron or steel, whether or not with heads of other materials, but not including such articles with heads of copper

73.32 Bolts and nuts ( including bolt ends and screw studs ), whether or not threaded or tapped, and screws ( including screw hooks and screw rings ), of iron or steel ; rivets, cotters, cotter-pins, washers and spring washers, of iron or steel i 1 )

73.33 Needles for hand sewing ( including embroidery ), hand carpet needles and hand knitting needles, bodkins, crochet hooks, and the like, and embroidery stilettos, of iron or steel

73.34 Pins ( excluding hatpins and other ornamental pins and drawing pins ), hairpins and curling grips, of iron or steel

73.35 Springs and leaves for springs, of iron or steel

73.36 Stoves ( including stoves with subsidiary boilers for central heating), ranges, cookers, grates, fires and other space heaters, gas-rings, plate warmers with burners, wash boilers with grates or other heating elements, and similar equipment, of a kind used for domestic purposes, not electrically operated , and parts thereof, of iron or steel

(') For screws for wood falling within subheading 73.32 ex B, the Community ceiling referred to m Article 1 (3 ) is set at 2 993 000 u.a .

20. 12 . 76 Official Journal of the European Communities No L 349/47

73.37 Boilers ( excluding boilers of heading No 84.01 ) and radiators, for central heating, not electrically heated , and parts thereof, of iron or steel ; air heaters and hot air distributors ( including those which can also distribute cool or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel

73.38 Articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of iron or steel

73.39 Iron or steel wool; pot scourers and scouring and polishing pads, gloves and the like, of iron or steel

73.40 Other articles of iron or steel (M (*)

CHAPTER 74

74.02 Master alloys

74.04 Wrought plates, sheets and strip, of copper ( )

74.05 Copper foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a thickness (excluding any backing) not exceeding 0-15 mm

74.06 Copper powders and flakes

74.07 Tubes and pipes and blanks therefor, of copper ; hollow bars of copper ( )

74.08 Tube and pipe fittings (for example, joints, elbows, sockets and flanges), of copper

74.09 Reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of copper, of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

74.10 Stranded wire, cables, cordage, ropes, plaited bands and the like, of copper wire, but excluding insulated electric wires and cables

74.11 Gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands), of copper wire

74.12 Expanded metal, of copper

74.13 Chain and parts thereof, of copper

74.14 Nails, tacks, staples, hook-nails, spiked cramps, studs, spikes and drawing pins, of copper, or of iron or steel with heads of copper

74.15 Bolts and nuts (including bolt ends and screw studs), whether or not threaded or tapped, and screws (including screws hooks and screw rings), of copper ; rivets, cotters, cotter-pins, washers and spring washers, of copper

(*) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 (3) and (4) are set at 6 850 200 u.a . and 30% respectively. (2) For products falling within this heading , the maximum Community amount referred to in Article 1 (4) is reduced to 30% . (3 ) For products falling within this heading , the ceiling and the maximum Community amount referred to in Article 1 (3) and (4) are set at 7 132 000 u.a . and 30% respectively.

No L 349/48 Official Journal of the European Communities 20. 12 . 76

74.16 Springs, of copper

74.17 Cooking and heating apparatus of a kind used for domestic purposes, not electri­ cally operated, and parts thereof, of copper

74.18 Other articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of copper

74.19 Other articles of copper

CHAPTER 75

75.02 Wrought bars, rods, angles, shapes and sections, of nickel ; nickel wire

75.03 Wrought plates, sheets and strip, of nickel ; nickel foil ; nickel powders and flakes

75.04 Tubes and pipes and blanks therefor, of nickel ; hollow bars, and tube and pipe fittings (for example, joints, elbows, sockets and flanges), of nickel

75.05 Electro-plating anodes, of nickel, wrought or unwrought, including those pro­ duced by electrolysis

75.06 Other articles of nickel

CHAPTER 76

76.02 Wrought bars, rods, angles, shapes and sections of aluminium ; aluminum wire H (*)

76.03 Wrought plates, sheets and strip, of aluminium (*) (*)

76.04 Aluminium foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a thickness (excluding any backing) not exceeding 0-20 mm

76.05 Aluminium powders and flakes

76.06 Tubes and pipes and blanks therefor, of aluminium ; hollow bars of aluminium

76.07 Tube and pipe fittings (for example, joints, elbows, sockets and flanges), of aluminium

76.08 Structures, and parts of structures (for example, hangars and other buildings, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, door and window frames, balustrades, pillars and columns), of aluminium ; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of aluminium

76.09 Reservoirs, tanks, vats and similar containers, for any material (other than com­ pressed or liquefied gas), of aluminium , of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equip­ ment

(*) For products falling within this subheading, the maximum Community amount referred to in Article 1 (4) is reduced to 20°/o .

20. 12 . 76 Official Journal of the European Communities No L 349/49

76.10 Casks, drums, cans, boxes and similar containers (including rigid and collapsible tubular containers), of aluminium, of a description commonly used for the con­ veyance or packing of goods

76.11 Containers, of aluminium, for compressed or liquefied gas

76.12 Stranded wire, cables, cordage, ropes, plaited bands and the like, of aluminium wire , but excluding insulated electric wires and cables

76.13 Gauze, cloth, grill, netting, reinforcing fabric and similar materials, of aluminium wire

76.14 Expanded metal, of aluminium

76.15 Articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of aluminium

76.16 Other articles of aluminium

CHAPTER 77

77.02 Wrought bars, rods, angles, shapes and sections, of magnesium ; magnesium wire ; wrought plates, sheets and strip, of magnesium ; magnesium foil ; raspings and shavings of uniform size, powders and flakes, of magnesium; tubes and pipes and blanks therefor, of magnesium ; hollow bars of magnesium

77.03 Other articles of magnesium

77.04 Beryllium, unwrought or wrought, and articles of beryllium

CHAPTER 78

78.02 Wrought bars, rods, angles, shapes and sections, of lead; lead wire

78.03 Wrought plates, sheets and strip, of lead

78.04 Lead foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material ), of a weight (excluding any backing) not exceeding 1-7 kg/m2 ; lead powders and flakes

78.05 Tubes and pipes and blanks, therefor, of lead ; hollow bars, and tube and pipe fittings (for example, joints, elbows, sockets, flanges and S-bends), of lead

78.06 Other articles of lead

CHAPTER 79

79.02 Wrought bars, rods, angles, shapes and sections, of zinc ; zinc wire

79.04 Tubes and pipes and blanks therefor, of zinc ; hollow bars, and tube and pipe fittings (for example, joints, elbows, sockets and flanges), of zinc

79.05 Gutters, roof capping, skylight frames, and other fabricated building components, of zinc

79.06 Other articles of zinc

No L 349/50 Official Journal of the European Communities 20. 12 . 76

CHAPTER 80

80.02 Wrought bars, rods, angles, shapes and sections, of tin ; tin wire

80.03 Wrought plates, sheets and strip, of tin

80.04 Tin foil (whether or not embossed, cut to shape, perforated, coated, printed or backed with paper or other reinforcing material), of a weight (excluding any backing) not exceeding 1 kg/m2 ; tin powders and flakes

80.05 Tubes and pipes and blanks therefor, of tin; hollow bars, and tube and pipe fittings ( for example, joints, elbows, sockets and flanges), of tin

80.06 Other articles of tin

CHAPTER 81

81.01 Tungsten (wolfram), unwrought or wrought, and articles thereof: B. Hammered bars ; angles, shapes and sections, wire, filaments, plates, sheets, strip and foil C. Other

81.02 Molybdenum, unwrought or wrought, and articles thereof: B. Hammered bars; angles, shapes and sections, wire , filaments, plates, sheets, strip and foil C. Other

81.03 Tantalum, unwrought or wrought, and articles thereof: B. Hammered bars ; angles, shapes and sections, wire , filaments, plates, sheets, strip and foil C. Other

81.04 Other base metals, unwrought or wrought, and articles thereof ; cerments, un­ wrought or wrought, and articles thereof: A. Bismuth : II. Other B. Cadmium : II . Other C. Cobalt : II . Other D. Chromium : II . Other E. Germanium : II . Other F. Hafnium (celtium): II . Other G. Manganese : II . Other H. Niobium ( columbium): II . Other IJ Antimony : II . Other K. Titanium : II. Other L. Vanadium : II . Other

20. 12. 76 Official Journal of the European Communities No L 349/51

81.04 N. Thorium : (cont'd) II. Other

O. Zirconium : II. Other P. Rhenium : II . Other

Q. Gallium ; indium ; thallium : II. Other

R. Cermets: II . Other

CHAPTER 82

82.01 Hand tools, the following: spades, shovels, picks, hoes, forks and rakes ; axes, bill hooks and similar hewing tools ; scythes, sickles, hay knives, grass shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry

82.02 Saws (non-mechanical) and blades for hand or machine saws (including tooth­ less saw blades)

82.03 Hand tools, the following: pliers (including cutting pliers), pincers, tweezers, tinmen's snips, bolt croppers and the like ; perforating punches ; pipe cutters ; spanners and wrenches (but not including tap wrenches); files and rasps

82.04 Hand tools, including glaziers' diamonds, not falling within any other heading of this Chapter; blow lamps, anvils ; vices and clamps, other than accessories for, and parts of, machine tools ; portable forges ; grinding wheels with frameworks (hand or pedal operated)

82.05 Interchangeable tools for hand tools, for machine tools or for power-operated hand tools (for example, for pressing, stamping, drilling, tapping, threading, boring, broaching, milling, cutting, turning, dressing, morticing or screw driving), including dies for wire drawing, extrusion dies for metal, and rock drilling bits

82.06 Knives and cutting blades, for machines or for mechanical appliances

82.07 Tool-tips and plates, sticks and the like for tool-tips, unmounted, of sintered metal carbides (for example, carbides of tungsten, molybdenum or vanadium )

82.08 Coffee-mills, mincers, juice-extractors and other mechanical appliances, of a weight not exceeding 10 kg and of a kind used for domestic purposes in the preparation, serving or conditioning of food or drink

82.09 Knives with cutting blades, serrated or not (including pruning knives), other than knives falling within heading No 82.06 (*)

82.10 Knife blades

82.11 Razors and razor blades (including razor blade blanks, whether or not in strips )

82.12 Scissors (including tailors' shears), and blades therefor

(*) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 (3) and (4) are set at 3 473 000 u.a . and 15% respectively .

No L 349/52 Official Journal of the European Communities 20. 12. 76

82.13 Other articles of cutlery ( for example, secateurs, hair clippers, butchers' cleavers, paper knives ); manicure and chiropody sets and appliances ( including nail files)

82.14 Spoons, forks, fish-eaters, butter-knives, ladles and similar kitchen or tableware (x )

82.15 Handles of base metal for articles falling within heading No 82.09 , 82.13 or 82.14

CHAPTER 83

83.01 Locks and padlocks (key, combination or electrically operated), and parts thereof, of base metal ; frames incorporating locks, for handbags, trunks or the like, and part of such frames, of base metal ; keys for any of the foregoing articles of base metal (2)

83.02 Base metal fittings and mountings of a kind suitable for furniture, doors, stair­ cases, windows, blinds, coachwork, saddlery, trunks, caskets and the like (in­ cluding automatic door closers); base metal hat-racks, hat-pegs, brackets and the like

83.03 Safes, strong-boxes, armoured or reinforced strong-rooms, strong-room linings and strong-room doors, and cash and deed boxes and the like, of base metal

83.04 Filing cabinets, racks, sorting boxes, paper trays, paper rests and similar office equipment, of base metal, other than office furniture falling within heading No 94.03

83.05 Fittings for loose-leaf binders, for files or for stationery . books, of base metal ; letter clips, paper clips, staples, indexing tags, and similar stationery goods, of base metal

83.06 Statuettes and other ornaments of a kind used indoors, of base metal

83.07 Lamps and lighting fittings, of base metal, and parts thereof, of base metal (excluding switches, electric lamp holders, electric lamps for vehicles, electric battery or magneto lamps, and other articles falling within Chapter 85 except heading No 85.22) (3)

83.08 Flexible tubing and piping, of base metal

83.09 Clasps, frames with clasps for handbags and the like, buckles, buckle-clasps, hooks, eyes, eyelets, and the like, of base metal, of a kind commonly used for clothing, travel goods, handbags, or other textile or leather goods ; tubular rivets and bifurcated rivets, of base metal

83.10 Beads and spangles, of base metal

83.11 Bells and gongs, non-electric, of base metal, and parts thereof of base metal

83.12 Photograph, picture and similar frames, of base metal ; mirrors of base metal

83.13 Stoppers, crown corks, bottle caps, capsules, bung covers, seals and plombs, case corner protectors and other packing accessories, of base metal

{') For products falling wirhin subheading 82.14 A , the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 4 437 000 u.a . and 15% respectively. (s) For products falling within this heading , the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 3 011 000 u.a . and 15% respectively. (s) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 ( 3 ) and (4) are set at 4 176 000 u.a . and 40% respectively .

20. 12 . 76 Official Journal of the European Communities No L 349/53

83.14 Sign-plates, name-plates, numbers, letters and other signs, of base metal

83.15 Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides ; wire and rods, of agglomerated base metal powder, used for metal spraying

CHAPTER 84

84.01 Steam and other vapour generating boilers (excluding central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers

84.02 Auxiliary plant for use with boilers falling within heading No 84.01 (for example, economizers, superheaters, soot removers, gas recoverers and the like); condensers for vapour engines and power units

84.03 Producer gas and water gas generators, with or without purifiers ; acetylene gas generators (water process) and similar gas generators , with or without purifiers

84.04 Steam engines (including mobile engines, but not steam tractors falling within heading No 87.01 or mechanically propelled road rollers) with self-contained boilers

84.05 Steam and other vapour power units, not incorporating boilers

84.06 Internal combustion piston engines

84.07 Hydraulic engines and motors (including water wheels and water turbines)

84.08 Other engines and motors

84.09 Mechanically propelled road rollers

84.10 Pumps (including motor pumps and turbo pumps) for liquids, whether or not fitted with measuring devices ; liquid elevators of bucket, chain, screw, band and similar kinds (*) ( a )

84.11 Air pumps, vacuum pumps and air or gas compressors (including motor and turbo pumps and compressors, and free-piston generators for gas turbines); fans, blowers and the like

84.12 Air conditioning machines, self-contained, comprising a motor-driven fan and elements for changing the temperature and humidity of air

84.13 Furnace burners for liquid fuel ( atomizers), for pulverized solid fuel or for gas ; mechanical stokers, mechanical grates, mechanical ash dischargers and similar appliances

84.14 Industrial and laboratory furnaces and ovens, non-electric

84.15 Refrigerators and refrigerating equipment (electrical and other)

84.16 Calendering and similar rolling machines (other than metal-working and metal­ rolling machines and glass-working machines) and cylinders therefor

( a) The asterisk covers only subheading 84.10 B II.

No L 349/54 Official Journal of the European Communities 20. 12 . 76

84.17 Machinery, plant and similar laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of tempera­ ture such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteuri­ zing, steaming, drying, evaporating, vapourizing, condensing or cooling, not being machinery or plant or a kind used for domestic purposes ; instantaneous or storage water heaters, non-electrical

84.18 Centrifuges ; filtering and purifying machinery and apparatus (other than filter funnels, milk strainers and the like), for liquids or gases

84.19 Machinery for cleaning or drying bottles or other containers ; machinery for filling, closing, sealing, capsuling or labelling bottles, cans, boxes, bags or other containers ; other packing or wrapping machinery; machinery for aerating beverages ; dish washing machines

84.20 Weighing machinery (excluding balances of a sensitivity of 5 eg or better), in­ cluding weight-operated counting and checking machines ; weighing machine weights of all kinds

84.21 Mechanical appliances (whether or not hand operated) for projecting, dispersing or spraying liquids or powders ; fire extinguishers (charged or not); spray guns and similar appliances ; steam or sand blasting machines and similar jet projecting machines

84.22 Lifting, handling, loading or unloading machinery, telphers and conveyors (for example, lifts, hoists, winches, cranes, transporter cranes, jacks, pulley tackle, belt conveyors and teleferics), not being machinery falling within heading No 84.23

84.23 Excavating, levelling, tamping, boring and extracting machinery, stationary or mobile, for earth, minerals or ores (for example, mechanical shovels, coal-cutters, excavators, scrapers, levellers and bulldozers); pile-drivers ; snow-ploughs, not self-propelled (including snow-plough attachments)

84.24 Agricultural and horticultural machinery for soil preparation or cultivation (for example, ploughs, harrows, cultivators, seed and fertilizer distributors); lawn and sports ground rollers

84.25 Harvesting and threshing machinery; straw and fodder presses; hay or grass mowers ; winnowing and similar cleaning machines for seed, grain or leguminous vegetables and egg-grading and other grading machines for agricultural produce (other than those of a kind used in the bread grain milling industry falling within heading No 84.29 )

84.26 Dairy machinery (including milking machines)

84.27 Presses, crushers and other machinery, of a kind used in wine-making, cider­ making, fruit juice preparation or the like

84.28 Other agricultural, horticultural, poultry-keeping and bee-keeping machinery ; germination plant fitted with mechanical or thermal equipment; poultry incu­ bators and brooders

84.29 Machinery of a kind used in the bread grain milling industry, and other machinery (other than farm type machinery) for the working of cereals or dried leguminous vegetables

84.30 Machinery, not falling within any other heading of this Chapter, of a kind used in the following food or drink industries : bakery, confectionery, chocolate manufacture, macaroni, ravioli or similar cereal food manufacture, the prepara­ tion of meat, fish, fruit or vegetables (including mincing or slicing machines), sugar manufacture or brewing

84.31 Machinery for making or finishing cellulosic pulp, paper or paperboard

20. 12 . 76 Official Journal of the European Communities No L 349/55

84.32 Book-binding machinery, including book-sewing machines

84.33 Paper or paperboard cutting machines of all kinds ; other machinery for making up paper pulp, paper or paperboard

84.34 Machinery, apparatus and accessories for type-founding or type-setting ; machin­ ery, other than the machine-tools of heading No 84.45, 84.46 or 84.47, for preparing or working printing blocks, plates, or cylinders ; printing type, impressed flongs and matrices, printing blocks, plates and cylinders ; blocks, plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished)

84.35 Other printing machinery ; machines for use ancillary to printing

84.36 Machines for extruding man-made textiles ; machines of a kind used for pro­ cessing natural or man-made textile fibres ; textile spinning and twisting machines ; textile doubling, throwing and reeling (including weft-winding) machines

84.37 Weaving machines, knitting machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net; machines for preparing yarns for use on such machines, including warping and warp sizing machines

84.38 Auxiliary machinery for use with machines of heading No 84.37 (for example, dobbies, jacquards, automatic stop motions and shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of the present heading or with machines falling within heading No 84.36 or 84.37 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttels, healds and heald-lifters and hosiery needles)

84.39 Machinery for the manufacture or finishing of felt in the piece or in shapes, including felt-hat making machines and hat-making blocks

84.40 Machinery for washing, cleaning, drying, bleaching, dyeing, dressing, finishing or coating textile yarns, fabrics or made-up textile articles (including laundry and dry-cleaning machinery); fabric folding, reeling or cutting machines; machines of a kind used in the manufacture of linoleum or other floor covering for applying the paste to the base fabric or other support ; machines of a type used for printing a repetitive design, repetitive words or overall colour on textiles, leather, wall­ paper, wrapping paper, linoleum or other materials, and engraved or etched plates, blocks or rollers therefor

84.41 Sewing machines ; furniture specially designed for sewing machines ; sewing machine needles : A. Sewing machines ; furniture specially designed for sewing machines : I. Sewing machines (lock-stitch only), with heads of a weight not exceeding 16 kg without motor or 17 kg including the motor ; sewing machine heads (lock-stitch only), of a weight not exceeding 16 kg without motor or 17 kg including the motor : a) Sewing machines having a value (not including frames, tables or furniture) of more than 65 u.a. each b ) Other 0 II. Other sewing machines and other sewing machine heads B. Sewing machine needles

84.42 Machinery (other than sewing machines) for preparing, tanning or working hides, skins or leather (including boot and shoe machinery )

(M For products falling within this subheading the ceiling and the maximum Community amount referred to in Article 1 (3) and (4) are set at 2 951 000 u.a . and 25% respectively .

No L 349/56 Official Journal of the European Communities 20. 12. 76

84.43 Converters, ladles, ingot moulds and casting machines, of a kind used in metal­ lurgy and in metal foundries

84.44 Rolling mills and rolls therefor

84.45 Machine-tools for working metal or metal carbides, not being machines falling within heading No 84.49 or 84.50

84.46 Machine-tools for working stone, ceramics, concrete, asbestos-cement and like mineral materials or for working glass in the cold, other than machines falling within heading No 84.49

84.47 Machine-tools for working wood, cork, bone, ebonite (vulcanite), hard artificial plastic materials or other hard carving materials, other than machines falling within heading No 84.49

84.48 Accessories and parts suitable for use solely or principally with the machines falling within heading Nos 84.45 to 84.47, including work and tool holders, self­ opening dieheads, dividing heads and other appliances for machine-tools ; tool holders for any type of tool or machine-tool for working in the hand

84.49 Tools for working in the hand , pneumatic or with self-contained non-electric motor

84.50 Gas-operated welding, brazing, cutting and surface tempering appliances

84.51 Typewriters, other than typewriters incorporating calculating mechanisms ; cheque-writing machines

84.52 Calculating machines ; accounting machines, cash registers, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calcula­ ting device O

84.53 Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data on to data media in coded form and machines for processing such data, not elsewhere specified or included

84.54 Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, coin-sorting machines, coin-counting and wrapping machines, pencil-sharpening machines, perforating and stapling machines)

84.55 Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of a kind falling within heading No 84.51 , 84.52, 84.53 or 84.54

84.56 Machinery for sorting, screening, separating, washing, crushing, grinding or mixing earth, stone, ores or other mineral substances, in solid (including powder and paste) form ; machinery for agglomerating, moulding or shaping solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form ; machines for forming foundry moulds of sand

84.57 Glass-working machines (other than machines for working glass in the cold); machines for assembling electric filament and discharge lamps and electronic and similar tubes and valves

84.58 Automatic vending machines (for example, stamp, cigarette, chocolate and food machines), not being games of skill or chance

84.59 Machines and mechanical appliances, having individual functions, not falling within any other heading bf this Chapter : A. For the manufacture of the products mentioned in subheading 28.51 A (EURATOM) B. Nuclear reactors (EURATOM) C. Specially designed for the recycling of irradiated nuclear fuels (for example, sintering of radio-active metal oxides, sheathing) (EURATOM)

(*) For products falling within subheading 84.52 A, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 21 363 000 u.a . and 35 % respectively .

20. 12. 76 Official Journal of the European Communities No L 349/57

84.59 D. Rope or cable making machinery, including electric wire and cable making (cont'd) machines E. Other

84.60 Moulding boxes for metal foundry ; moulds of a type used for metal (other than ingot moulds), for metal carbides, for glass, for mineral materials (for example, ceramic pastes, concrete or cement) or for rubber or artificial plastic materials

84.61 Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats and the like, including pressure reducing valves and thermostatically controlled valves (*■) ( a)

84.62 Ball , roller or needle roller bearings (*)

ex 84.63 Transmission shafts, cranks, bearing housings, plain shaft bearings, gears and gearing (including friction gears ana gearboxes and other variable speed gears), flywheels, pulleys and pulley blocks, clutches and shaft couplings, but not in­ cluding forged or roughly shaped shafts, of a weight exceeding 150 metric tons, for generators or turbines

84.64 Gaskets and similar joints of metal sheeting combined with other material (for example, asbestos, felt and paperboard) or of laminated metal foil ; sets or assort­ ments of gaskets and similar joints, dissimilar in composition, for engines, pipes tubes and the like, put up in pouches, envelopes or similar packings

84.65 Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features and not falling within any other heading in this Chapter

CHAPTER 85

85.01 Electrical goods of the following descriptions : generators, motors, converters ( rotary or static), transformers, rectifiers and rectifying apparatus ; inductors : A. Generators, motors (whether or not equipped with speed reducing, changing or step-up gear) and rotary converters : I. Synchronous motors of an output of not more than 18 watts (') B. Transformers, static converters, rectifiers and rectifying apparatus; inductors C. Parts (2)

85.02 Electro-magnets ; permanent magnets and articles of special materials for perma­ nent magnets, being blanks of such magnets ; electro-magnetic and permanent magnet chucks, clamps, vices and similar work holders ; electro-magnetic clutches and couplings; electro-magnetic brakes ; electro-magnetic lifting heads

85.03 Primary cells and primary batteries (3) (*)

85.04 Electric accumulators (4 )

85.05 Tools for working in the hand, with self-contained electric motor

85.06 Electro-mechanical domestic appliances, with self-contained electric motor

(a) The asterisk covers only subheading 84.61 ex B (taps , cocks, valves and similar appliances of pig iron or cast iron ). (') For products falling within subheading 85.01 A I, the ceiling and the maximum Community amount referred to in Article 1 (3) and (4) are set at 2 344 000 u.a . and 20% respectively . (2) For products falling within subheading 85.01 C , the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 6 455 000 u.a . and 25% respectively. (3) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 4 441 000 u.a . and 30% respectively. (4) For products falling within subheading 85.04 A (lead-acid accumulators), the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 2 089 000 u.a. and 20% respectively.

No L 349/58 Official Journal of the European Communities 20. 12 . 76

85.07 Shavers and hair clippers, with self-contained electric motor

85.08 Electrical starting and ignition equipment for internal combustion engines (including ignition magnetos, magneto-dynamos, ignition coils, starter motors, sparking plugs and glow plugs); generators (dynamos and alternators) and cut-outs for use in conjunction with such engines

85.09 Electrical lighting and signalling equipment and electrical windscreen wipers, defrosters and demisters, for cycles or motor vehicles

85.10 Portable electric battery and magneto lamps, other than lamps falling within heading No 85.09 : A. Miners' safety lamps

85.11 Industrial and laboratory electric furnaces, ovens and inductions and dielectric heating equipment; electric welding, brazing and soldering machines and appara­ tus and similar electric machines and apparatus for cutting

85.12 Electric instantaneous or storage water heaters and immersion heaters ; electric soil heating apparatus and electric space heating apparatus ; electric hair dressing appliances (for example, hair dryers, hair curlers, curling tong heaters) and electric smoothing irons ; electro-thermic domestic appliances ; electric heating resistors, other than those of carbon

85.13 Electrical line telephonic and telegraphic apparatus (including such apparatus for carrier-current line systems)

85.14 Microphones and stands therefor; loudspeakers; audio-frequency electric amplifiers 85.15 Radiotelegraphic and radiotelephonic transmission and reception apparatus; radio-broadcasting and television transmission and reception apparatus (including receivers incorporating sound recorders or reproducers) and television cameras ; radio navigational aid apparatus, radar apparatus and radio remote control apparatus (*) : A. Radiotelegraphic and radiotelephonic transmission and reception apparatus; radio-broadcasting and television transmission and reception apparatus (including receivers incorporating sound recorders or reproducers) and tele­ vision cameras : I. Transmitters II. Transmitter- receivers IV. Television cameras B. Other apparatus C. Parts of the goods of subheadings A and B above : I. Cabinets and cases II. Parts of base metal, obtained by turning bars, angles, shapes, sections or wire, of solid section, the greatest diameter of which does not exceed 25 mm

85.16 Electric traffic control equipment for railways, roads or inland waterways and equipment used for similar purposes in port installations or upon airfields

85.17 Electric sound or visual signalling apparatus (such as bells, sirens, indicator panels, burglar and fire alarms), other than those of heading No 85.09 or 85.16

85.18 Electrical capacitors, fixed or variable (2)

(l) For products falling within subheadings 85.15 A 1 , II , IV ; B ; C I , II , the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set respectively at 18 423 000 u.a . and 25% . (*) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 7 609 000 u.a . and 20% respectively .

20. 12. 76 Official Journal of the European Communities No L 349/59

85.19 Electrical apparatus for making and breaking electrical circuits, for the protection of electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, lightning arresters, surge suppressors, plugs, lampholders and junction boxes); resistors, fixed or variable (including potentio­ meters), other than heating resistors; printed circuits; switchboards (other than telephone switchboards) ana control panels (*) ( 2)

85.20 Electric filament lamps and electric discharge lamps (including infra-red and ultra-violet lamps); arc-lamps ; electrically ignited photographic flashbulbs (3)

85.21 Thermionic, cold cathode and photo-cathode valves and tubes ( including vapour or gas filled valves and tubes, cathode-ray tubes, television camera tubes and mercury arc rectifying valves and tubes); photocells ; mounted piezo-electric crystals ; diodes, transistors and similar semi-conductor devices ; electronic micro­ circuitsO ): A. Valves and tubes B. Photocells, including photo-transistors C. Mounted piezo-electric crystals

85.22 Electrical appliances and apparatus, having individual functions, not falling within any other heading of this Chapter

85.24 Carbon brushes, arc-lamp carbons, battery carbons, carbon electrodes and other carbon articles of a kind used for electrical purposes

85.25 Insulators of any material

85.26 Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal incorpo­ rated during moulding solely for purposes of assembly, but not including insulators falling within heading No 85.25

85.27 Electrical conduit tubing and joints therefor, of base metal lined with insulating material

85.28 Electrical parts of machinery and apparatus, not being goods falling within any of the preceding headings of this Chapter

CHAPTER 86 RAILWAY AND TRAMWAY LOCOMOTIVES, ROLLING-STOCK AND PARTS THEREOF; RAILWAY AND TRAMWAY TRACK FIXTURES AND FITTINGS ; TRAFFIC SIGNALLING EQUIPMENT OF ALL KINDS (NOT ELECTRICALLY POWERED )

CHAPTER 87

87.01 Tractors (other than those falling within heading No 87.07), whether or not fitted with power take-offs, winches or pulleys

87.02 Motor vehicles for the transport of persons, goods or materials ( including sports motor vehicles, other than those falling within heading No 87.09)

87.03 Special purpose motor lorries and vans (such as breakdown lorries, fire-engines, fire-escapes, road sweeper lorries, snow-ploughs, spraying lorries, crane lorries, searchlight lorries, mobile workshops and mobile radiological units), but not including the motor vehicles falling within heading No 87.02

87.04 Chassis fitted with engines, for the motor vehicles falling within heading No 87.01 , 87.02 or 87.03

(') For products falling within subheading 85.19 A, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 29 654 000 u.a . and 25 % respectively. {*) For products falling within subheading 85.19 B, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 6 139 000 u.a. and 40% respectively . (*) For products falling within subheading 85.20 A, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 3 310 000 u.a . and 25% respecti\ ely. (4) For products falling within subheadings 85.21 A , B and C, the Community ceiling referred to in Article 1 (3 ) is set at 9 592 000 u.a .

No L 349/60 Official Journal of the European Communities 20. 12. 76

87.05 Bodies (including cabs) for the motor vehicles falling within heading No 87.01 , 87.02 or 87.03

87.06 Parts and accessories of the motor vehicles falling within heading No 87.01 , 87.02 or 87.03

87.07 Works trucks, mechanically propelled, of the type used in factories, warehouses, dock areas or airports for short distance transport or handling of goods (for example, platform trucks, fork-lift trucks and straddle carriers) ; tractors of the type used on railway station platforms ; parts of the foregoing vehicles

87.08 Tanks and other armoured fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles

87.09 Motor-cycles, auto-cycles and cycles fitted with an auxiliary motor, with or without side-cars ; side-cars of all kinds

87.10 Cycles (including delivery tricycles), not motorized (x ) (*)

87.11 Invalid carriages, fitted with means of mechanical propulsion (motorized or not)

87.12 Parts and accessories of articles falling within heading No 87.09, 87.10 or 87.11 (2) (*) (a)

87.13 Baby carriages and invalid carriages (other than motorized or otherwise mechani­ cally propelled) and parts thereof

87.14 Other vehicles (including trailers), not mechanically propelled, and parts thereof: A. Animal-drawn vehicles B. Trailers and semi-trailers : I. Specially designed for the transport of highly radio-active materials (EURATOM) C. Other vehicles D. Parts

CHAPTER 88 AIRCRAFT AND PARTS THEREOF; PARACHUTES ; CATAPULTS AND SIMILAR AIRCRAFT LAUNCHING GEAR ; GROUND FLYING TRAINERS

CHAPTER 89 SHIPS, BOATS AND FLOATING STRUCTURES

CHAPTER 90

90.01 Lenses, prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked ; sheets or plates, of polarizing material

90.02 Lenses, prisms, mirrors and other optical elements of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked

90.03 Frames and mountings, and parts thereof, for spectacles, pince-nez, lorgnettes, goggles and the like

(a) The asterisk covers only subheading 87.12 B. (') For products falling within this subheading, the maximum Community amount referred to in Article 1 (4) is reduced to 20°/o . (') For products falling within subheading 87.12 B , the maximum Community amount referred to in Article 1 (4) is reduced to 30Vo .

20. 12. 76 Official Journal of the European Communities No L 349/ 61

90.04 Spectacles, pince-nez, lorgnettes, goggles and the like, corrective, protective or other

90.06 Astronomical instruments (for example, reflecting telescopes, transit instruments and equatorial telescopes), and mountings therefor, but not including instruments for radio-astronomy

90.07 Photographic cameras ; photographic flashlight apparatus : A. Photographic cameras B. Photographic flashlight apparatus

90.08 Cinematographic cameras, projectors, sound recorders and sound reproducers but not including re-recorders or film editing apparatus ; any combination of these articles : A. Cameras and sound recorders, combined or not B. Projectors and sound reproducers, combined or not

90.09 Image projectors ( other than cinematographic projectors); photographic (except cinematographic) enlargers and reducers (*)

90.10 Apparatus and equipment of a kind used in photographic or cinematographic laboratories, not falling within any other heading in this Chapter; photocopying apparatus ( whether incorporating an optical system or of the contact type) and thermo-copying apparatus ; screens for projectors

90.11 Microscopes and diffraction apparatus, electron and proton

90.12 Compound optical microscopes, whether or not provided with means for photo­ graphing or projecting the image

90.13 Optical appliances and instruments ( but not including lighting appliances other than searchlights or spotlights), not falling within any other heading of this Chapter

90.14 Surveying ( including photogrammetrical surveying), hydrographic, navigational meteorological, hydrological and geophysical instruments ; compasses ; rangefinders

90.15 Balances of a sensitivity of 5 eg or better, with or without their weights

90.16 Drawing, marking-out and mathematical calculating instruments, drafting machines, pantographs, slide rules, disc calculators and the like; measuring or checking instruments, appliances and machines, not falling within any other heading of this Chapter (for example, micrometers, callipers, gauges, measuring rods, balancing machines); profile projectors

90.17 Medical, dental, surgical and veterinary instruments and appliances (including electro-medical apparatus and ophthalmic instruments) (2)

90.18 Mechano-therapy appliances ; massage apparatus ; psychological aptitude-testing apparatus ; artificial respiration, ozone therapy, oxygen therapy, aerosol therapy or similar apparatus ; breathing appliances (including gas masks and similar respirators)

90.19 Orthopaedic appliances, surgical belts, trusses and the like; splints and other frac­ ture appliances ; artificial limbs, eyes, teeth and other artificial parts of the body ; hearing-aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability

(') For products falling within this heading, the Community ceiling referred to in Article 1 (3 ) is set at 1 995 000 u.a . (2) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article ] (3 ) and (4 ) are set at 10 473 000 u.a . and 40% respectively .

No L 349/62 Official Journal of the European Communities 20. 12 . 76

90.20 Apparatus based on the use of X-rays or of the radiations from radioactive substances (including radiography and radiotherapy apparatus); X-ray generators ; X-ray tubes ; X-ray screens; X-ray high tension generators ; X-ray control panels and desks ; X-ray examination or treatment tables, chairs and the like

90.21 Instruments, apparatus or models, designed solely for demonstrational purposes (for example, in education or exhibition), unsuitable for other uses

90.22 Machines and appliances for testing mechanically the hardness, strength, compres­ sibility, elasticity and the like properties of industrial materials (for example, metals, wood, textiles, paper or plastics)

90.23 Hydrometers and similar instruments ; thermometers, pyrometers, barometers, hygrometers, psychrometers, recording or not; any combination of these instru­ ments

90.24 Instruments and apparatus for measuring, checking or automatically controlling the flow, depth, pressure or other variables of liquids or gases, or for automatically controlling temperature (for example, pressure gauges, thermostats, level gauges, flow meters, heat meters, automatic oven-draught regulators), not being articles falling within heading No 90.14

90.25 Instruments and apparatus for physical or chemical analysis (such as polarimeters, refractometers, spectrometers, gas analysis apparatus); instruments and apparatus for measuring or checking viscosity; porosity, expansion, surface tension or the like (such as viscometers, porosimeters, expansion meters); instruments and apparatus for measuring or checking quantities of heat, light or sound (such as photometers (including exposure meters), calorimeters); microtomes

90.26 Gas, liquid and electricity supply or production meters; calibrating meters therefor

90.27 Revolution counters, production counters, taximeters, mileometers, pedometers, and the like, speed indicators (including magnetic speed indicators) and tacho­ meters (other than articles falling within heading No 90.14); stroboscopes

90.28 Electrical measuring, checking, analysing or automatically controlling instruments and apparatus

90.29 Parts or accessories suitable for use solely or principally with one or more of the articles falling within heading No 90.23, 90.24, 90.26, 90.27 or 90.28

CHAPTER 91

91.01 Pocket-watches, wrist-watches, and other watches, including stop-watches 91.02 Clocks with watch movements (excluding clocks of heading No 91.03 )

91.03 Instrument panel clocks and clocks of a similar type, for vehicles, aircraft or vessels

91.04 Other clocks

91.05 Time of day recording apparatus ; apparatus with clocks or watch movement (including secondary movement) or with synchronous motor, for measuring, recording or otherwise indicating intervals of time

91.06 Time switches with clock or watch movement (including secondary movement) or with synchronous motor 91.07 Watch movements (including stop-watch movements), assembled 91.08 Clock movements, assembled

91.09 Watch cases and parts of watch cases (*)

91.10 Clock cases and cases of a similar type for other goods of this Chapter, and part thereof

91.11 Other clock and watch parts

{*) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 (3 ) and (4) are set at 2 077 000 u.a. and 20% respectively.

20. 12. 76 Official Journal of the European Communities No L 349/63

CHAPTER 92

92.01 Pianos (including automatic pianos, whether or not with keyboards); harpsichords and other keyboard stringed instruments ; harps but not including aeolian harps

92.02 Other string musical instruments

92.03 Pipe and reed organs, including harmoniums and the like

92.04 Accordions, concertinas and similar musical instruments ; mouth organs

92.05 Other wind musical instruments

92.06 Percussion musical instruments ( for example, drums, xylophones, cymbals, castanets)

92.07 Electro-magnetic, electrostatic, electronic and similar musical instruments (for example, pianos, organs, accordions)

92.08 Musical instruments not falling within any other heading of this Chapter ( for example, fairground organs, mechanical street organs, musical boxes, musical saws ); mechanical singing birds ; decoy calls and effects of all kinds ; mouthblown sound-signalling instruments ( for example, whistles and boatswains' pipes )

92.09 Musical instrument strings

92.10 Parts and accessories of musical instruments ( other than strings ), including perforated music rolls and mechanisms for musical boxes ; metronomes, tuning forks and pitch pipes of all kinds

92.11 Gramophones, dictating machines and - other sound recorders and reproducers, including record-players and tape decks, with or without sound-heads; television image and sound recorders and reproducers, magnetic : B. Television image and sound recorders and reproducers, magnetic

92.12 Gramophone records and other sound or similar recordings ; matrices for the production of records, prepared record blanks, film for mechanical sound recording, prepared tapes, wires, strips and like articles of a kind commonly used for sound or similar recording (*)

92.13 Other parts and accessories of apparatus falling within heading No 92.11

CHAPTER 93 ARMS AND AMMUNITIONS ; PARTS THEREOF (*) ( a )

CHAPTER 94

94.01 Chairs and other seats (other than those falling within heading No 94.02), whether or not convertible into beds, and parts thereof: A. Specially designed for aircraft

94.02 Medical, dental, surgical or veterinary furniture (for example, operating tables, hospital beds with mechanical fittings); dentists' and similar chairs with mechanical elevating, rotating or reclining movements ; parts of the foregoing articles

(a ) The asterisk covers only subheading 93.07 B. (i ) For products falling within this heading, the ceiling and the maximum Community amount referred to in Article 1 (3) and (4) are set at 6 640 000 u.a . and 30 % respectively .

No L 349/64 Official Journal of the European Communities 20. 12 . 76

94.04 Mattress supports ; articles of bedding or similar furnishing fitted with springs or stuffed or internally fitted with any material or of expanded, foam or sponge rubber or expanded, foam or sponge artificial plastic material, whether or not covered (for example, mattresses, quilts, eiderdowns, cushions, pouffes and pillows)

CHAPTER 95 ARTICLES AND MANUFACTURES OF CARVING OR MOULDING MATERIAL

CHAPTER 96 BROOMS , BRUSHES , FEATHER DUSTERS, POWDER-PUFFS AND SIEVES (*) ( a)

CHAPTER 97

97.01 Wheeled toys designed to be ridden by children ( for example, toy bicycles and tricycles and pedal motorcars); dolls' prams and dolls' pushchairs

97.04 Equipment for parlour, table and funfair games for adults or children ( including billiard tables and pintables and table-tennis requisites (x ) (*) ( b )

97.06 Appliances , apparatus, accessories and requisites for gymnastics or athletics, or for sports and outdoor games (other than articles falling within heading No 97.04) ( 2 )

97.07 Fish-hooks, line fishing rods and tackle ; fish landing nets and butterfly nets ; decoy 'birds ', lark mirrors and similar hunting or shooting requisites

97.08 Roundabouts, swings, shooting galleries and other fairground amusements ; travelling circuses , travelling menageries and travelling theatres

CHAPTER 98

98.01 Buttons and button moulds , studs , cuff-links, and press-fasteners, including snap-fasteners and press-studs ; blanks and parts of such articles

98.02 Slide fasteners and parts thereof

98.03 Fountain pens, stylograph pens and pencils ( including ballpoint pens and pencils and other pens), pen-holders, pencil-holders and similar holders, propelling pencils and sliding pencils ; parts and fittings thereof, other than those falling within heading No 98.04 or 98.05

98.04 Pen nibs and nib points

98.05 Pencils ( other than pencils of heading No 98.03 ), pencil leads, slate pencils, crayons and' pastels, drawing charcoals and writing and drawing chalks ; tailors' and billiard chalks

98.06 Slates and boards, with writing or drawing surfaces , whether framed or not

98.07 Date, sealing or numbering stamps, and the like ( including devices for printing or embossing labels), designed for operating in the hand ; hand-operated compo­ sing sticks and hand printing sets incorporating such composing sticks

98.08 Typewriter and similar ribbons, whether or not on spools; ink-pads with or without boxes

(a ) The asterisk covers only subheadings 96.02 A and C. ( b) The asterisk covers only subheading 97.04 A. (') For products falling within heading No 97.04 , the maximum Community amount referred to in ' Article 1 (4) is reduced to 30°/o . (2 ) For products falling within subheadings 97.06 B and C , the Community ceiling referred to in Article 1 (3) is set at 16 078 000 u.a .

20. 12. 76 Official Journal of the European Communities No L 349/65

98.09 Sealing wax (including bottle-sealing wax) in sticks, cakes or similar forms ; copying pastes with a basis of gelatin , whether or not a paper or textile backing

98.10 Mechanical lighters and similar lighters, including chemical and electrical lighters, and parts thereof, excluding flints and wicks

98.11 Smoking pipes; pipe bowls, stems and other parts of smoking pipes (including roughly shaped blocks of wood or root); cigar and cigarette holders and parts thereof

98.12 Combs, hair-slides and the like

98.13 Corset busks and similar supports for articles of apparel or clothing accessories

98.14 Scent and similar sprays of a kind used for toilet purposes, and mounts and heads therefor

98.16 Tailors' dummies and other lay figures ; automata and other animated displays of a kind used for shop window dressing

CHAPTER 99 WORKS OF ART, COLLECTORS' PIECES , AND ANTIQUES

No L 349/66 Official Journal of the European Communities 20 . 12 . 76

ANNEX B

List of developing countries and territories enjoying generalized tariff preferences

I. INDEPENDENT COUNTRIES

Afghanistan 0 Haiti C ) Romania Algeria Honduras Rwanda ( ] ) Angola India Sao Tome and Principe Argentina Indonesia Saudi Arabia Bahamas Iran Senegal Bahrain Iraq Seychelles Bangladesh (*) Ivory Coast Sierra Leone Barbados Jamaica Singapore Bénin (*) Jordan Somalia (*) Bhutan (*) Kenya Sri Lanka Bolivia Khmer Republic Sudan (*) Botswana (x) Korea (South ) Surinam Brazil Kuwait Swaziland Burma Laos 0 Syria Burundi (x) Lebanon Tanzania (x) Cameroon Lesotho (1) Thailand Cape Verde Islands Liberia Togo Central African Republic (*) Libya Tonga Chad i1) Malagasy Republic Trinidad and Tobago Chile Malawi (*) Tunisia Colombia Malaysia Uganda (*) Comoros Maldive Islands (1) United Arab Emirates : Congo, People's Republic of Mali (*) Abu Dhabi Costa Rica Mauritania Bubai Cuba Mauritius Ras al Khaimah Cyprus Mexico Fujairah Dominican Republic Morocco A j man Ecuador Mozambique Sharjah Egypt, Arab Republic of Nauru Ummal Qaiwain El Salvador Nepal (') Upper Volta ( 1) Equatorial Guinea Nicaragua Uruguay Ethiopia i1) Niger i1) Venezuela Fiji Nigeria Vietnam Gabon Ornan Western Samoa 0) Gambia (*) Pakistan Yemen , People's Demoen Ghana Panama Republic of (*) Grenada Papua New Guinea Yemen Arab Republic (] Guatemala Paraguay Yugoslavia Peru Zaire Guinea (-1) Guinea Bissau Zambia Philippines Guyana Qatar

(x) This country is also listed in Annex C.

20 . 12 . 76 Official Journal of the European Communities No L 349/67

II . COUNTRIES AND TERRITORIES

dependent or administered, or for whose external relations Member States of the Community or third countries are wholly or partly responsible

Afars and Issas (Territory of the) Australian Antarctic Territory Belize Bermuda British Antarctic Territory British Indian Ocean Territory (Aldabra, Farquhar, Chagos Archipelago, Desroches) British Pacific Ocean (*) Brunei Cayman Islands and Dependencies Christmas Island Cocos (Keeling) Islands Corn Islands and Swan Islands Falkland Islands and Dependencies French Polynesia French Southern and Antarctic Territories Gibraltar Heard Island and McDonald Islands Hong Kong Leeward Islands (2) Macao Mayotte Netherlands Antilles New Caledonia and Dependencies Norfolk Island Pacific Islands administered by the United States of America or under United States trusteeship (s) Portuguese Timor St Helena (including Ascension, Gough Island, and Tristan da Cunha) Spanish territories in Africa Territories for which New Zealand is responsible ( Cook Islands, Niue Island, Tokelau Islands and Ross Dependency) Turks and Caicos Islands Virgin Islands of the United States ( St Croix, St Thomas, St John, etc.) Wallis and Futuna Islands Windward Islands (*)

Note: The above lists may be amended subsequently to take account of changes in the inter­ national status of countries or territories .

I1) Gilbert Islands, Tuvalu, British Solomon Islands, New Hebrides Condominium, and Pitcairn Islands. (') Antigua , Montserrat, St Kitts-Nevis-Anguilla , British Virgin Islands. (*) The Pacific Islands administered by the United States of America include : Guam , American Samoa (including Swain's Island), Midway Islands , Johnston and Sand Islands , Wake Island and the Trust Territory of the Pacific Islands (the Caroline, Marianas and Marshall Islands). (4) Dominica, St Lucia. St Vincent.

No L 349/68 Official Journal of the European Communities 20 . 12. 76

ANNEX C

List of least developed developing countries to which the first subparagraph of Article 2 (2) does not applv

Afghanistan Malawi Bangladesh Maldive Islands Bénin Mali Bhutan Nepal Botswana Niger Burundi Rwanda Central African Republic Somalia Chad Sudan F.thopia Tanzania Gambia Uganda Guinea Upper Volta Haiti Western Samoa Laos Yemen , People's Democratic Republic of Lesotho Yemen Arab Republic