31980R1481

Council Regulation (EEC) No 1481/80 of 9 June 1980 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial products

CELEX: 31980R1481
Datum: 1980-06-09
Källa: eur-lex.europa.eu

Avis juridique important

Council Regulation (EEC) No 1481/80 of 9 June 1980 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial products Official Journal L 148 , 14/06/1980 P. 0001 - 0020 Greek special edition: Chapter 02 Volume 8 P. 0236

****

COUNCIL REGULATION ( EEC ) NO 1481/80

OF 9 JUNE 1980

TEMPORARILY SUSPENDING THE AUTONOMOUS COMMON CUSTOMS TARIFF DUTIES ON CERTAIN INDUSTRIAL PRODUCTS

THE COUNCIL OF THE EUROPEAN

COMMUNITIES ,

HAVING REGARD TO THE TREATY ESTABLISHING THE EUROPEAN ECONOMIC COMMUNITY , AND IN PARTICULAR ARTICLE 28 THEREOF ,

HAVING REGARD TO THE DRAFT REGULATION SUBMITTED BY THE COMMISSION ,

WHEREAS PRODUCTION OF THE PRODUCTS REFERRED TO IN THIS REGULATION IS AT PRESENT INADEQUATE OR NON-EXISTENT WITHIN THE COMMUNITY AND PRODUCERS ARE THUS UNABLE TO MEET THE NEEDS OF USER INDUSTRIES IN THE COMMUNITY ;

WHEREAS IT IS IN THE COMMUNITY ' S INTEREST TO SUSPEND THE AUTONOMOUS COMMON CUSTOMS TARIFF DUTIES ONLY PARTIALLY IN CERTAIN CASES , DUE PARTICULARLY TO THE EXISTENCE OF COMMUNITY PRODUCTION , AND TO SUSPEND THEM COMPLETELY IN OTHER CASES ;

WHEREAS , TAKING ACCOUNT OF THE DIFFICULTIES INVOLVED IN ACCURATELY ASSESSING THE DEVELOPMENT OF THE ECONOMIC SITUATION IN THE SECTORS CONCERNED IN THE NEAR FUTURE , THESE SUSPENSION MEASURES SHOULD BE TAKEN ONLY TEMPORARILY WITH THEIR TERM OF VALIDITY FIXED TO COINCIDE WITH THE INTERESTS OF COMMUNITY PRODUCTION ,

HAS ADOPTED THIS REGULATION :

Article1¶

THE AUTONOMOUS COMMON CUSTOMS TARIFF DUTIES FOR THE PRODUCTS LISTED IN THE TABLES ANNEXED TO THIS REGULATION SHALL BE SUSPENDED AT THE LEVEL INDICATED IN RESPECT OF EACH OF THEM .

THESE SUSPENSIONS SHALL BE VALID :

- FROM 1 JULY TO 31 OCTOBER 1980 FOR THE PRODUCT LISTED IN TABLE I ,

- FROM 1 JULY TO 31 DECEMBER 1980 FOR THE PRODUCTS LISTED IN TABLE II ,

- FROM 1 JULY 1980 TO 30 JUNE 1981 FOR THE PRODUCTS LISTED IN TABLE III .

Article2¶

THIS REGULATION SHALL ENTER INTO FORCE ON 1 JULY 1980 .

THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES .

DONE AT LUXEMBOURG , 9 JUNE 1980 .

FOR THE COUNCIL

THE PRESIDENT

F . PANDOLFI

****

ANNEX

TABLE I // //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 38.19 G // CATALYST CONSISTING OF A MIXTURE OF OXIDES ON A SILICON DIOXIDE SUPPORT AND CONTAINING BY WEIGHT : //

// ( A ) NOT LESS THAN 25 % AND NOT MORE THAN 40 % OF ANTIMONY //

// ( B ) NOT LESS THAN 5 % AND NOT MORE THAN 10 % OF IRON //

// ( C ) NOT LESS THAN 0.2 % AND NOT MORE THAN 1.5 % OF MOLYBDENUM //

// ( D ) NOT LESS THAN 0.8 % AND NOT MORE THAN 4.0 % OF TELLURIUM // 0 //

****

TABLE II

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 28.21 // CHROMIUM DIOXIDE // 0 //

EX 28.24 // COBALT OXIDES AND HYDOXIDES // 0 //

EX 28.40 B II // PENTACALCIUM HYDROXIDE TRIS(ORTHOPHOSPHATE ) FOR USE IN NON-FERROUS METALLURGY ( A ) // 0 //

EX 28.47 F // CALCIUM WOLFRAMATE , FOR THE MANUFACTURE OF FERRO-ALLOYS OR HEXA-AMMONIUM HEPTAWOLFRAMATE ( A ) // 0 //

EX 29.02 B // 1 , 6 , 7 , 8 , 9 , 14 , 15 , 16 , 17 , 17 , 18 , 18-DODECACHLOROPENTACYCLO ( 12.2.1.16,9.02,13.05,10 ) OCTADECA-7 , 15-DIENE , FOR USE IN THE MANUFACTURE OF POLYPROPYLENE ( A ) // 0 //

EX 29.03 B II // 1-NITROPROPANE // 0 //

EX 29.03 B II // 2-NITROPROPANE // 0 //

EX 29.03 B II // NITROETHANE // 0 //

EX 29.13 A I // 3.3-DIMETHYLBUTANONE // 0 //

EX 29.15 C III // TETRABROMOPHTHALIC ANHYDRIDE // 0 //

EX 29.19 C // 2.2-BIS ( CHLOROMETHYL ) TRIMETHYLENE TETRAKIS ( 2-CHLOROETHYL ) ( PHOSPHATE ) // 0 //

EX 29.19 C EX 28.19 U // TETRAKIS ( 2-CHLOROETHYL ) ETHYLENE BIS ( PHOSPHATE ) // 0 //

EX 29.23 A II // ( +)-4-DIMETHYLAMINO-3-METHYL-1,2-DIPHENYLBUTAN-2-OL // 0 //

EX 29.23 D V // IMINODI ( ACETIC ACID ) // 7.4 //

EX 29.25 A II // ACRYLAMIDO-2-METHYLPROPANESULPHONIC ACID // 0 //

EX 29.25 B III B ) // BENDIOCARB ( ISO ) // 0 //

EX 29.26 A I // 1.2-BENZISOTHIAZOL-3-ONE 1.1-DIOXIDE ( O-BENZOICSULPHIMIDE , SACCHARIN ) AND ITS SODIUM SALT // 8 //

EX 29.34 C // TRICHLORONAT ( ISO ) // 0 //

EX 29.34 C // 2-CHLOROETHYLPHOSPHONIC ACID // 10 //

EX 29.35 Q // 2-CHLORODIBENZ ( B,F ) ( 1.4 ) OXAZEPIN-11(10H)-ONE // 0 //

EX 29.35 Q // 2,3,5,6-TETRACHLOROPYRIDINE // 0 //

EX 29.43 B // RIBOSE // 0 //

EX 29.43 B // SUCRALFATE ( INN ) // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 32.01 A IV // TANNING EXTRACTS OF EUCALYPTUS // 3.2 //

EX 32.09 A II EX 39.01 C V // POLYURETHANE OF 2.2 ' -(TERT-BUTYLAMINE ) DIETHANOL AND 4.4 ' -METHYLENEDI ( CYCLOHEXAL ISOCYANATE ), DISSOLVED IN N,N-DIMETHYLACETAMIDE , WITH A COPOLYMER CONTENT OF NOT LESS THAN 48 % BY WEIGHT // 0 //

EX 32.09 A II EX 39.02 C XIV A ) // COPOLYMER OF P-CRESOL AND DIVINYLBENZENE , DISSOLVED IN N,N-DIMETHYLACETAMIDE , WITH A COPOLYMER CONTENT OF NOT LESS THAN 48 % BY WEIGHT // 0 //

EX 38.03 B // ACID ACTIVATED MONTMORILLONITE WHICH , WHEN EXAMINED BY X-RAY POWDER DIFFRACTION , SHOWS FOUR PRINCIPAL LINES CORRESPONDING TO CRYSTAL INTERPLANER SPACING ( D VALUES ) OF 0.44 , 0.40 , 0.33 AND 0.25 NM , THE LINE CORRESPONDING TO 0.40 NM BEING THE MOSTINTENSE // 0 //

38.07 A // GUM SPIRITS OF TURPENTINE // 3 //

EX 38.08 C // ROSIN HYDROGENATED , POLYMERIZED , DIMERIZED OR OXIDIZED // 4 //

EX 38.19 G // CATALYSTS IN THE FORM OF SPHERICAL GRAINS WITH A DIAMETER OF NOT LESS THAN 1.4 MM AND NOT MORE THAN 1.8 MM CONSISTING OF BORON TRIFLUORIDE ON AN ALUMINIUM OXIDE SUPPORT // 0 //

EX 38.19 G // CATALYSTS IN THE FORM OF RODLETS HAVING A LENGTH OF NOT MORE THAN 5.0 MM AND ADIAMETER OF NOT MORE THAN 3.6 MM , CONSISTING OF COPPER OXIDE AND DICHROMIUM TRIOXIDE // 0 //

EX 38.19 G // CATALYSTS , IN THE FORM OF GRANULES OR RINGS HAVING A DIAMETER OF NOT LESS THAN 3 MM AND NOT MORE THAN 10 MM , CONSISTING OF SILVER SUPPORTED ON ALUMINIUM OXIDE , THE SILVER CONTENT BEING NOT LESS THAN 10 % AND NOT MORE THAN 20 % BY WEIGHT // 0 //

EX 38.19 G // CATALYSTS CONSISTING OF COPPER CHLORIDE SUPPORTED ON ALUMINIUM OXIDE FOR THE PREPARATION OF DICHLOROETHANE FROM ETHYLENE , HYDROCHLORIC ACID AND OXYGEN , WITH A SURFACE AREA OF LESS THAN 90 M2/G ( A ) // 0 //

EX 38.19 U // CHOLIC ACID AND 3-ALPHA , 12-ALPHA-DIHYDROXY-5-BETA-CHOLAN-24-OIC ACID ( DEOXYCHOLIC ACID ), CRUDE // 0 //

EX 38.19 U // CRUDE BILE ACIDS // 0 //

EX 38.19 U // FLAME RETARDANT REACTION PRODUCTS OF ACETALDEHYDE , ETHYLENE OXIDE AND PHOSPHOROUS TRICHLORIDE // 0 //

EX 38.19 U // MIXTURES OF TERTIARY THIOLS // 8 //

EX 39.01 C III // REFLECTING POLYESTER SHEETING WHETHER OR NOT IN ROLLS // 0 //

EX 39.01 C III B ) // POLYESTER OF A MIXTURE OF ISOPHTHALIC ACID AND TEREPHTALIC ACID WITH 4.4 ' -ISOPROPYLIDENEDIPHENOL // 0 //

EX 39.01 C V // POLYURETHANE POLYMERS IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( A ) TO CHAPTER 39 , BASED ON A MIXTURE OF 2-METHYL AND 4-METHYL-M-PHENYLENE DI-ISOCYANATES AND BRANCHED CHAIN TRIOLS WITH AN AVERAGE MOLECULAR WEIGHT OF NOT LESS THAN 6 000 , AND CONTAINING TERMINAL EPOXY GROUPS // 12 //

EX 39.01 C V // POLYURETHANE REFLECTING SHEETING WHETHER OR NOT IN ROLLS // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 39.01 C VII // POLY ( OXY ( 2.6-DIBROMO-1.4-PHENYLENE )) FOR USE IN THE MANUFACTURE OF POLYPROPYLENE ( A ) // 0 //

EX 39.02 C VI A ) // COPOLYMER OF MALEIC ANHYDRIDE AND STYRENE , WHETHER OR NOT CONTAINING A STYRENE-BUTADIENE BLOCK COPOLYMER IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( B ) TO CHAPTER 39 // 0 //

EX 39.02 C VI A ) // AN A-B-A BLOCK COPOLYMER OF POLYSTYRENE ETHYLENE-BUTYLENE COPOLYMER AND POLYSTYRENE CONTAINING NOT MORE THAN 35 % BY WEIGHT OF STYRENE , IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( B ) TO CHAPTER 39 // 0 //

EX 39.02 C VII B ) // REFLECTING POLYVINYL CHLORIDE SHEETING WHOLLY EMBOSSED ON ONE SIDE IN A REGULAR PYRAMIDAL PATTERN , WHETHER OR NOT IN ROLLS // 0 //

EX 39.02 C XII // REFLECTING POLYACRYLIC SHEETING , WHETHER OR NOT IN ROLLS // 0 //

EX 39.02 C XII // COPOLYMERIZATION PRODUCTS OF ACRYLIC AND METHACRYLIC ESTERS IN THE FORM OF FILM OF A THICKNESS NOT LESS THAN 50 AND NOT MORE THAN 150 MICROMETERS , WHETHER OR NOT IN ROLLS // 0 //

EX 39.02 C XII // COPOLYMER OF ACRYLIC ACID AND 2-ETHYLHEXYL ACRYLATE CONTAINING NOT LESS THAN 10 % AND NOT MORE THAN 11 % BY WEIGHT OF 2-ETHYLHEXYL ACRYLATE // 0 //

EX 39.02 C XIV B ) // REFLECTING SHEETING OF AN ACRYLIC POLYMER MODIFIED BY MELAMINE-FORMALDEHYDE , WHETHER OR NOT IN ROLLS // 0 //

EX 41.02 B // BOVINE SKINS , CHROME TANNED IN THE MOIST STATE ( WET BLUE ) // 0 //

EX 48.05 B // CREPED HOUSEHOLD AND TOILET PAPER , TWO PLY , NOT CONTAINING MECHANICAL WOOD-PULP , WITH A WEIGHT PER PLY OF NOT LESS THAN 15 G/M2 AND NOT MORE THAN 19 G/M2 IN ROLLS WITH A WIDTH OF NOT LESS THAN 19 CM // 8 //

EX 48.05 B // CREPED HOUSEHOLD AND TOILET PAPER , TWO PLY , NOT CONTAINING MECHANICAL WOOD-PULP , WITH A WEIGHT PER PLY OF NOT LESS THAN 15 G/M2 AND NOT MORE THAN 25 G/M2 IN ROLLS WITH A WIDTH OF NOT LESS THAN 150 CM // 8 //

EX 48.05 B // CREPED HOUSEHOLD AND TOILET PAPER , TWO PLY , CONTAINING NOT MORE THAN 50 % MECHANICAL WOOD-PULP , WITH A WEIGHT PER PLY OF NOT LESS THAN 16 G/M2 AND NOT MORE THAN20 G/M2 IN ROLLS WITH A WIDTH OF NOT LESS THAN 150 CM // 8 //

EX 48.07 D // KRAFT PAPER WITH LATEX ADDITION TO THE STOCK , COATED ON ONE SIDE WITH POLYBUTADIENE-STYRENE WEIGHING NOT LESS THAN 104 G AND NOT MORE THAN 130 G/M2 FOR THE MANUFACTURE OF DISPOSABLE NAPPY INSERTS ( A ) // 6 //

EX 51.01 A // YARN , MULTIPLE , OF POLYAMIDE , COATED , IMPREGNATED OR COVERED WITH A PHENOLIC RESIN // 0 //

EX 51.01 A // YARN OF POLY(P-PHENYLENETEREPHTHALAMIDE ), INTENDED FOR THE MANUFACTURE OF DRYER SCREENS FOR PAPERMAKING MACHINES ( A ) // 0 //

EX 51.01 A // YARN OF SYNTHETIC TEXTILE FIBRES OF AROMATIC POLYAMIDES OBTAINED BY POLYCONDENSATION OF M-PHENYLENEDIAMINE AND ISOPHTHALIC ACID // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 56.01 A // SYNTHETIC TEXTILE FIBRES OF AROMATIC POLYAMIDES OBTAINED BY POLYCONDENSATION OF M-PHENYLENEDIAMINE AND ISOPHTHALIC ACID // 0 //

EX 59.03 // BONDES-FIBRE FABRICS , WITH A THICKNESS OF NOT MORE THAN 300 MICROMETRES , OF SPUN-BONDED POLYETHYLENE FIBRES , WITH A WEIGHT NOT EXCEEDING 115 G/M2 , WHETHER OR NOT IN ROLLS // 0 //

EX 59.08 // KNITTED OR WOVEN FABRIC COATED OR COVERED ON ONE SIDE WITH ARTIFICIAL PLASTIC MATERIAL IN WHICH ARE EMBEDDED GLASS MICROSPHERES // 0 //

EX 59.12 // COTTON FABRIC COATED WITH ADHESIVE IN WHICH ARE EMBEDDED GLASS BALLS THE DIAMETERS OF WHICH RANGE FROM 45 TO 75 MICROMETRES , WEIGHING NOT LESS THAN 300 G/M2 AND NOT MORE THAN 550 G/M2 // 0 //

62.03 A I // SACKS AND BAGS , OF A KIND USED FOR THE PACKING OF GOODS , USED , OF JUTE OR OF OTHER TEXTILE BAST FIBRES OF HEADING NO 57.03 // 0 //

EX 70.20 B // YARNS OF 34 TEX OR A MULTIPLE THEREOF OBTAINED FROM CONTINUOUS SPUN GLASS FILAMENTS HAVING A DIAMETER OF NOT LESS THAN 5.2 AND NOT MORE THAN 6.2 MICROMETRES , OTHER THAN THOSE TREATED SO AS TO IMPROVE THEIR ADHESION TO ELASTOMERS // 6.3 //

EX 70.20 B // YARNS OF 33 TEX OR A MULTIPLE THEREOF OBTAINED FROM CONTINUOUS SPUN GLASS FILAMENTS HAVING A DIAMETER OF NOT LESS THAN 5.8 AND NOT MORE THAN 6.4 MICROMETRES , OTHER THAN THOSE TREATED SO AS TO IMPROVE THEIR ADHESION TO ELASTOMERS // 6.3 //

EX 81.04 M // WASTE AND SCRAP OF URANIUM DEPLETED IN U 235 // 0 //

EX 84.31 A // SUCTION ROLL SHELLS , NOT DRILLED , BEING ALLOY STEEL TUBES WITH A LENGTH OF NOT LESS THAN 5 207 MM AND AN OUTSIDE DIAMETER OF NOT LESS THAN 754 MM FOR USE IN MACHINERY FOR MAKING PAPER OR PAPERBOARD ( A ) // 0 //

EX 84.51 A // ELECTRONIC POCKET COMMUNICATORS FOR HANDICAPPED PERSONS WHICH , BY MEANS OF PUSH BUTTONS AND PRINTING THERMIC HEAD , PRINT AND ISSUE TEXT ON TAPE // 0 //

EX 85.55 C // PARTS AND ACCESSORIES OF ELECTRONIC POCKET COMMUNICATORS FOR HANDICAPPED PERSONS WHICH , BY MEANS OF PUSH BUTTONS AND PRINTING THERMIC HEAD , PRINT AND ISSUE TEXT ON TAPE // 0 //

EX 85.03 // LITHIUM OIDINE , BATTERIES , WITH A NOMINAL VALUE OF NOT LESS THAN 40 EUA , FOR CARDIAC STIMULATORS ( A ) // 0 //

EX 85.21 A V // DIGITAL DISPLAYS CONSISTING OF A GLASS TUBE MOUNTED ON A BOARD UP TO 220 MM LONG AND 45 MM WIDE EXCLUDING LEADS . THE TUBE CONTAINS A STRAIGHT LINE OF DIGITS NOT LESS THAN FOUR IN NUMBER , EACH DIGIT CONSISTING OF A NUMBER OF SEGMENTS CONTAINING AN INERT GAS WITH A METALLIC BASE COATED WITH PHOSPHORUS SALTS WHICH GIVE OFF LIGHT WHEN BOMBARDED WITH ELECTRONS // 0 //

EX 85.21 D II // DIGITAL DISPLAYS CONSISTING OF A PRINTED CIRCUIT BOARD OF A SIZE NOT EXCEEDING35 BY 90 MM WITH A SINGLE LINE OF DIGITS , NOT LESS THAN THREE IN NUMBER COMPRISING LIGHT-EMITTING DIODES MANUFACTURED FROM GALLIUM-BASED SEMI-CONDUCTOR COMPOUNDS MOUNTED THEREON . EACH DIGIT IS COMPOSED OF SEVEN SEGMENTS PLUS A DECIMAL POINT AND THE LINE OF DIGITS HAS A PROTECTIVE COVER OF TRANSLUCENT PLASTIC // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 85.21 D II // ELECTRONIC PROGRAMMABLE READ ONLY MEMORIES ( EPROMS ), UV ERASABLE , WITH A STORAGE CAPACITY OF 32 K BITS OR 64 K BITS , IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONTAINED IN A HOUSING BEARING A CAPACITY MARKING OF ' 32 ' OR ' 64 ' , WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 15.6 BY 33.3 MM , WITH A QUARTZ WINDOW ON THE UPPERSURFACE // 0 //

EX 85.21 D II // ELECTRONIC PROGRAMMABLE READ ONLY MEMORIES ( EPROMS ), UV ERASABLE , WITH A STORAGE CAPACITY OF 16 K BITS , IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONTAINED IN A HOUSING BEARING A CAPACITY MARKING OF ' 16 ' , WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 15.6 BY 33.3 MM , WITH A QUARTZ WINDOW ON THE UPPER SURFACE // 8 //

EX 85.21 D II // RANDOM ACCESS MEMORIES ( RAMS ), WITH A STORAGE CAPACITY OF 64 K BITS , IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONTAINED IN A HOUSING BEARING A CAPACITY MARKING OF ' 64 ' , WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 7.7 BY 20.6 MM , WITH EIGHT CONNECTING PINS ALONG EACH OF THE LONGER SIDES // 0 //

****

TABLE III

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 13.03 A V // EXTRACT OF DEWAXED PYRETHRUM // 0 //

EX 27.13 B II // SYNTHETIC PARAFFIN WAX HAVING A MOLECULAR WEIGHT OF NOT LESS THAN 460 AND NOT MORE THAN 1 560 // 0 //

EX 28.04 B // HELIUM // 0 //

EX 28.04 C III // TELLURIUM IN POWDER OR INGOTS // 0 //

EX 28.13 IJ // TELLURIUM DIOXIDE // 0 //

EX 28.31 C // LITHIUM HYPOCHLORITE // 0 //

EX 28.38 C // POTASSIUM HYDROGENPEROXOMONOSULPHATE // 0 //

EX 28.42 A VI // LITHIUM CARBONATES NOT CORRESPONDING TO THE FOLLOWING SPECIFICATIONS : //

// - IN THE FORM OF WHITE POWDER //

// - CONTAINING 98.5 % OR MORE OF LI2CO3 AND : //

// - LESS THAN 2 PPM OF ARSENIC //

// - LESS THAN 200 PPM OF CALCIUM //

// - LESS THAN 200 PPM OF CHLORIDES //

// - LESS THAN 20 PPM OF IRON //

// - LESS THAN 150 PPM OF MAGNESIUM //

// - LESS THAN 20 PPM OF HEAVY METALS //

// - LESS THAN 300 PPM OF POTASSIUM //

// - LESS THAN 300 PPM OF SODIUM //

// - LESS THAN 200 PPM OF SULPHATES // 0 //

28.46 A I B ) // SODIUM BORATES , ANHYDROUS // 0 //

EX 28.48 B III // HYDROTALCITE ( INN ) // 0 //

28.51 A // DEUTERIUM , DEUTERIUM OXIDE ( HEAVY WATER ) AND OTHER COMPOUNDS OF DEUTERIUM ; HYDROGEN AND COMPOUNDS THEREOF , ENRICHED IN DEUTERIUM ; MIXTURES AND SOLUTIONS CONTAINING THESE PRODUCTS ( EURATOM ) // 0 //

EX 28.57 A // SILANE ( SILICON HYDRIDE ) // 0 //

EX 28.57 B // MANGANESE NITRIDE CONTAINING NOT MORE THAN 8 % OF NITROGEN BY WEIGHT // 0 //

EX 29.01 C I // BETA-PINENE // 0 //

EX 29.01 D VII // VINYLTOLUENES // 0 //

EX 29.02 A I // CARBON TETRAFLUORIDE ( TETRAFLUOROMETHANE ) // 0 //

EX 29.02 A II B ) // 1,2,3-TRICHLOROPROPENES // 0 //

EX 29.02 A III // VINYL BROMIDE // 0 //

EX 29.02 A III // 1,2-DIBROMOETHANE // 4 //

EX 29.02 A V // BROMOCHLOROMETHANE // 0 //

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 29.02 B // 1,6,7,8,9,14,15,16,17,17,18,18-DODECACHLOROPENTACYCLO ( 12.2.1.16,9.02,13.05,10 ) OCTADECA-7 , 15-DIENE , FOR USE IN THE MANUFACTURE OF POLYAMIDE ( A ) // 0 //

EX 29.03 B II // NITROMETHANE // 0 //

EX 29.03 C I // METHANESULPHONYL CHLORIDE // 0 //

EX 29.04 C I // BUTANE-1.3-DIOL // 0 //

EX 29.04 C V // 2,2-BIS(BROMOMETHYL)PROPANEDIOL // 0 //

EX 29.06 A IV // 2-TERT-BUTYL-4-ETHYLPHENOL // 0 //

EX 29.06 A IV // 2-ISOPROPYLPHENOL // 6 //

EX 29.06 B V // 4,4 ' -(2.3-DIMETHYLTETRAMETHYLENE)DIPYROCATECHOL , NOT LESS THAN 98 % PURE // 0 //

EX 29.06 B V //

6,6 ' , 6 " -TRI-TERT-BUTYL-4,4 ' , 4 " -(L-METHYLPROPAN-L-YL-3-YLIDENE HETHER OR NOT CONTAINING TOLUENE OF CRYSTALLIZATION // 0 //

EX 29.06 B V // 2,5-DI(TERT-PHENYL)HYDROQUINONE // 0 //

EX 29.08 A III C ) // BIS(PHENOXYPHENOXY)BENZENE , MIXED ISOMERS // 0 //

EX 29.08 A III C ) // SODIUM 4-(2-METHYLALLYLOXY)BENZENESULPHONATE // 0 //

EX 29.08 D // TERT-BUTYL HYDROPEROXIDE , AQUEOUS SOLUTION // 0 //

EX 29.09 B // 1,2-EPOXYBUTANE // 7 //

EX 29.13 A I // 5-METHYLHEXAN-2-ONE // 0 //

EX 29.13 B I B ) // REFINED NATURAL BORNAN-2-ONE ( CAMPHOR ) // 0 //

EX 29.13 D I B ) // 3-BETA-HYDROXY-16-ALPHA-METHYLPREGN-5-EN-20-ONE // 6 //

EX 29.13 D I B ) //

11-ALPHA,17,21-TRIHYDROXY-16-BETA-METHYLPREGNA-1,4-DIENE-3,20 //

EX 29.13 E // 4-METHOXY-4-METHYLPENTAN-2-ONE // 0 //

EX 29.13 F // 1,4-NAPHTHOQUINONE // 0 //

EX 29.13 G II // L-CHLORO-3,3-DIMETHYLBUTANONE // 0 //

EX 29.14 A II C ) 4 // 16-ALPHA,17-ALPHA-EPOXY-20-OXOPREGN-5-EN-3-BETA-YL ACETATE // 6 //

EX 29.14 A II C ) 4 //

11-ALPHA,17-ALPHA,21-TRIHYDROXY-16-ALPHA-METHYL-5-ALPHA-PREGN 21-ACETATE 11-(TOLUENE-4-SULPHONATE ) // 9 //

EX 29.14 A II C ) 4 // 20-OXOPREGNA-5,16-DIEN-3-BETA-YL ACETATE // 0 //

EX 29.14 A XI // 2,2 ' -ETHYLENEDIOXYDIETHYL BIS(2-ETHYLBUTYRATE ) // 0 //

EX 29.14 B IV B ) // BUTYL PERCHLOROCROTONATE // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

29.15 A IV A ) // AZELAIC ACID AND SEBACIC ACID // 0 //

EX 29.15 C III // BENZENE-1,2,4-TRICARBOXYLIC ACID // 0 //

EX 29.15 C III // BENZENE-1,2,4,TRICARBOXYLIC ACID 1,2-ANHYDRIDE // 0 //

EX 29.15 C III // TETRACHLOROPHTHALIC ANHYDRIDE // 0 //

EX 29.15 C III // BENZYL 3-ISOBUTYRYLOXY-L-ISOPROPYL-2,2-DIMETHYLPROPYLPHTHALATE // 0 //

EX 29.16 A II // L-MALIC ACID AND ITS SALTS AND ESTERS // 0 //

29.16 A III A ) // CRUDE CALCIUM TARTRATE // 3.5 //

EX 29.16 A VIII A ) // 2,2-BIS ( HYDROXYMETHYL)PROPIONIC ACID // 0 //

EX 29.16 B III // 2-ETHYLHEXYL 4-HYDROXYBENZOATE // 0 //

EX 29.16 B VI // OCTADECYL 3-(3,5-DI-TERT-BUTYL-4-HYDROXYPHENYL)PROPIONATE // 0 //

EX 29.16 B VI // PENTAERYTHRITOL TETRAKIS(3-(3,5-DI-TERT-BUTYL-4-HYDROXYPHENYL)PROPINATE ) // 0 //

EX 29.16 D // DINOPROSTONE ( INN ) // 0 //

EX 29.22 A III // TERT-BUTYLAMINE // 0 //

EX 29.22 B II // N,N,N ' , N ' -TETRABUTYLHEXAMETHYLENEDIAMINE // 0 //

EX 29.22 D I // 3,5-DICHLOROANILINE // 0 //

EX 29.22 E II // 1,8-NAPHTHYLENEDIAMINE // 0 //

EX 29.22 E II // M-PHENYLENEBIS(METHYLAMINE ) // 0 //

EX 29.23 A II // BIS(2-DIMETHYLAMINOETHYL ) ETHER // 0 //

EX 29.23 A II // DINOPROST ( INN ), TROMETAMOL SALT ( INN ) // 0 //

EX 29.23 C // KETAMINE HYDROCHLORIDE ( INNM ) // 0 //

EX 29.23 D V // TRANEXAMIC ACID ( INN ) // 0 //

EX 29.23 D V // 3,5-DIAMINOBENZOIC ACID // 0 //

EX 29.23 D V // BETA-ALANINE // 0 //

EX 29.23 E // 4-(2-HYDROXY-3-ISOPROPYLAMINOPROPOXY)-2,3,6-TRIMETHYLPHENYL ACETATE // 0 //

EX 29.23 E // METHYLDOPA ( INN ) // 0 //

EX 29.23 E // DIETHYL 1,3-BENZODIOXOL-5-YLAMINOMETHYLENEMALONATE // 0 //

EX 29.23 E // 6-ACETYL-1,3-BENZODIOXOL-5-YLAMMONIUM CHLORIDE // 0 //

EX 29.23 E // LEVODOPA ( INN ) // 0 //

EX 29.23 E // DOBUTAMINE ( INN ) AND ITS SALTS // 0 //

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 29.25 A II // N-ACETYL-DL-VALINE // 0 //

EX 29.25 A II // ( 3-METHACRYLAMIDOPROPYL)TRIMETHYLAMMONIUM CHLORIDE // 0 //

29.25 B II A ) // PHENOBARBITAL ( INN ) AND ITS SALTS // 11 //

EX 29.25 B II C ) // BARBITURIC ACID // 0 //

EX 29.25 B III B ) // 2 ' -BENZOYL-4 ' -CHLORO-N-(2-HYDROXYPROPYL)GLYCINANILIDE // 0 //

EX 29.27 // 4-BROMOPHENYLACETONITRILE // 0 //

EX 29.27 //

( - ) -N-(ALPHA-CYANO-4-HYDROXY-3-METHOXY-ALPHA-METHYLPHENETHYL ) //

EX 29.27 // 2-(3-PHENOXYPHENYL)PROPIONONITRILE // 0 //

EX 29.29 // 20-HYDROXYIMINOPREGNA-5,16-DIEN-3-YL ACETATE // 0 //

EX 29.29 // CARBIDOPA ( INN ) // 0 //

EX 29.29 // ROBENIDINE HYDROCHLORIDE ( INNM ) // 0 //

EX 29.29 // N,N-DIETHYLHYDROXYLAMINE // 0 //

EX 29.30 // 0,0-BIS(4-TERT-BUTYLPHENYL ) N-CYCLOHEXYLPHOSPHORAMIDOTHIOATE // 0 //

EX 29.30 // METHYL ISOCYANATE // 9 //

EX 29.31 B // 2-METHYL-2-(METHYLTHIO)PROPIONALDEHYDE OXIME // 0 //

EX 29.31 B // 4-(METHYLTHIO)PHENOL // 0 //

EX 29.31 B // THIOPHENOL // 0 //

EX 29.31 B // TOLNAFTATE ( INN ) // 0 //

EX 29.31 B // 2,2 ' -THIODIETHYL BIS(3-(3,5-DI-TERT-BUTYL-4-HYDROXYPHENYL)PROPIONATE ) // 0 //

EX 29.34 C // CRYSTALLINE DIMETHYLTIN DICHLORIDE IN THE FORM OF POWDER , FOR THE PRODUCTION OF GOODS FALLING WITHIN CHAPTER 70 ( A ) // 0 //

EX 29.35 Q // 2-ACETYL-1,4-BUTYROLACTONE // 0 //

EX 29.35 Q // 4-NITROBENZYL

7-AMINO-3-METHYL-8-OXO-5-THIA-1-AZABICYCLO(4.2.0)OCT-2-ENE-2- ND ITS SALTS // 0 //

EX 29.35 Q // 2-BENZOTRIAZOL-2-YL-4-(1,1,3,3-TETRAMETHYLBUTYL ) PHENOL // 0 //

EX 29.35 Q // 2-BENZOTRIAZOL-2-YL-P-CRESOL // 0 //

EX 29.35 Q //

2,6-DI-TERT-BUTYL-4-(4,6-BIS(OCTYLTHIO)-1,3,5-TRIAZIN-2-YL-AM //

EX 29.35 Q AND EX 30.03 A II B ) // BUTORPHANOL ( INN ) AND ITS SALTS // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 29.35 Q //

( -)-L-TERT-BUTYLAMINO-3-(4-MORPHOLINO-1,2,5-THIADIAZOL-3-YLOX //

EX 29.35 Q // CLOTIAZEPAM ( INN ) // 0 //

EX 29.35 Q // 1,4-DIAZABICYCLO(2.2.2)OCTANE(TRIETHYLENEDIAMINE ) // 0 //

EX 29.35 Q // 2,4-DI-TERT-BUTYL-6-(5-CHLOROBENZOTRIAZOL-2-YL)PHENOL // 0 //

EX 29.35 Q // CARPIPRAMINE DIHYDROCHLORIDE ( INNM ) // 0 //

EX 29.35 Q // 2,3-DIHYDRO-2,2-DIMETHYLBENZOFURAN-7-OL // 0 //

EX 29.35 Q //

1-ETHYL-1,4-DIHYDRO-4-OXO(1,3)DIOXOLO(4,5-G)CINNOLINE-3-CARBO //

EX 29.35 Q // INDOMETACIN ( INN ) // 0 //

EX 29.35 Q // DIPHEMANIL METILSULPHATE ( INN ) // 0 //

EX 29.35 Q // MINOXIDIL ( INN ) // 0 //

EX 29.35 Q // ORAZAMIDE ( INN ) // 0 //

EX 29.35 Q // ( 25R)-SPIROST-5-EN-3-BETA-OL(DIOSGENIN ) AND ITS ESTERS // 0 //

EX 29.35 Q // TRIAZOLAM ( INN ) // 0 //

EX 29.35 Q // L-TRYPTOPHAN // 0 //

EX 29.35 Q // 4-NITROBENZYL

7-AMINO-3-CHLORO-8-OXO-5-THIA-L-AZABICYCLO(4.2.0)OCT-2-ENE-2- ND ITS SALTS // 0 //

EX 29.35 Q // AZATADINE DIMALEATE ( INNM ) // 0 //

EX 29.35 Q // AMPROLIUM HYDROCHLORIDE ( INNM ) // 0 //

EX 29.35 Q // 2-(4-PYRIDYL)ETHANESULPHONIC ACID // 0 //

EX 29.35 Q // PRIFINIUM BROMIDE ( INN ) // 0 //

EX 29.35 Q // GLUCUROLACTONE ( INN ) // 0 //

EX 29.36 // QUINETHAZONE ( INN ) // 0 //

EX 29.36 // SULFAGUANIDINE ( INN ) // 0 //

EX 29.36 // SULFATHIAZOLE ( INN ) // 0 //

EX 29.36 // 4-CHLORO-5-SULPHAMOYLANTHRANIL-O-TOLUIDIDE // 0 //

EX 29.38 B II // PANTHENOL ( INN ) // 0 //

EX 29.38 B III // FOLIC ACID ( INN ) // 0 //

EX 29.39 C I // SERUM GONADOTROPHIN ( INN ) // 0 //

EX 29.39 D II // BETAMETHASONE 21-ACETATE ( INNM ) // 0 //

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 29.39 D II // TRIAMCINOLONE ACETONIDE ( INNM ) // 8 //

EX 29.39 D II // BETAMETHASONE 17,21-DIPROPIONATE ( INNM ) // 0 //

EX 29.39 D II // TRIAMCINOLONE 16-ALPHA,21-DIACETATE ( INNM ) // 8 //

EX 29.39 D II // FLUOROMETHOLONE ( INN ) // 0 //

EX 29.39 D II // HALCINONIDE ( INN ) // 0 //

EX 29.39 D II // TRIAMCINOLONE HEXACETONIDE ( INN ) // 8 //

EX 29.39 D II // METHYLPREDNISOLONE ( INN ) // 8 //

EX 29.39 D II // TRIAMCINOLONE ( INN ) // 8 //

EX 29.39 D II // DIFLORASONE DI(ACETATE ) ( INNM ) // 0 //

EX 29.39 E // CALCITONIN ( INN ), SALMON-TYPE AND ITS SALTS // 0 //

EX 29.39 E // CALUSTERONE ( INN ) // 0 //

EX 29.39 E // PRASTERONE ( INN ) // 0 //

EX 29.39 E // CALCITONIN ( INN ), PORCINE // 0 //

EX 29.42 C VII // PILOCARPINE HYDROCHLORIDE // 0 //

EX 29.42 C VII // PILOCARPINE NITRATE // 0 //

EX 29.42 C VII // ( 22R,25R)-TOMAT-5-ENIN-3-BETA-OL ( SOLASODINE ) // 0 //

EX 29.44 A // EPICILLIN ( INN ) // 0 //

EX 29.44 C AND EX 30.03 A II B ) // AMIKACIN ( INN ) AND ITS SALTS // 0 //

EX 29.44 C // AMOPHOTERICIN B ( INN ) // 0 //

EX 29.44 C // CEFOXITIN SODFUM ( INNM ) // 0 //

EX 29.44 C // CEFRADINE ( INN ) // 0 //

EX 29.44 C // MINOCYCLINE MONO-HYDROCHLORIDE DIHYDRATE ( INNM ) // 0 //

EX 29.44 C // CLINDAMYCIN ( INN ) AND ITS SALTS AND ESTERS // 0 //

EX 29.44 C // SPECTINOMYCIN DIHYDROCHLORIDE PENTAHYDRATE ( INNM ) // 0 //

EX 29.44 C // GENTAMICIN ( INN ) AND ITS SALTS // 0 //

EX 29.44 C // NYSTATIN ( INN ) // 0 //

EX 29.44 C AND EX 30.03 A II B ) // BLEOMYCIN SULPHATE ( INNM ) // 0 //

EX 29.44 C // SISOMICIN SULPHATE ( INNM ) // 0 //

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 29.44 C // SPECTINOMYCIN SULPHATE ( INNM ) // 0 //

EX 29.44 C // TOBRAMYCIN ( INN ) AND ITS SALTS // 0 //

EX 29.44 C // CEFAMANDOLE ( INN ) AND ITS SALTS AND ESTERS // 0 //

EX 29.44 C // CEFAZOLIN ( INN ) AND ITS SALTS // 0 //

EX 29.44 C // LINCOMYCIN ( INN ) AND ITS SALTS AND ESTERS , FOR THE MANUFACTURE OF PRODUCTS FALLING WITHIN HEADING NO 30.03 ( A ) // 0 //

EX 29.44 C // MONENSIN ( INN ) AND ITS SALTS // 0 //

EX 29.44 C // CEFACLOR ( INN ) AND ITS HYDRATES , SALTS AND ESTERS // 0 //

EX 29.44 C // FUMAGILLIN DICYCLOHEXYLAMMONIUM ( INNM ) // 0 //

EX 29.45 // POTASSIUM TERT-BUTOXIDE // 0 //

EX 30.01 A // BOVINE LIVERS FOR ORGANOTHERAPEUTIC PURPOSES , DRIED // 0 //

EX 30.01 B II // EXTRACTS OF LIVER OF BOVINE ANIMALS // 0 //

EX 30.01 B II // EXTRACTS OF SUPRARENAL GLANDS // 0 //

EX 30.02 A // TENANUS IMMONOGLOBULIN // 0 //

EX 30.02 A // ANTI-TETANUS IMMUNOPLASMA // 0 //

EX 30.02 A // GERMAN MEASLES IMMUNOPLASMA // 0 //

EX 30.02 A // MUMPS IMMUNOPLASMA // 0 //

EX 30.02 A // WHOOPING-COUGH IMMUNOPLASMA // 0 //

EX 30.03 A II B ) B II B ) // HUMAN ALBUMIN , WHETHER OR NOT IN SOLUTION // 0 //

EX 30.03 A II B ) B II B ) // HUMAN FIBRINOGEN // 0 //

EX 30.03 A II B ) B II B ) // PRESERVED SERUM PREPARED ON A BASIS OF HUMAN BLOOD // 0 //

EX 30.03 A II B ) B II B ) // ANTI-HAEMOPHILIC GLOBULIN AND ANTI-RH , ( D)-GLOBULIN DERIVED FROM HUMAN BLOOD // 0 //

EX 30.03 A II B ) // CISPLATIN ( INN ) // 0 //

EX 30.03 A II B ) // MIXTURE OF OESTROGENS OF EQUINE ORIGIN IN POWDER FORM // 0 //

EX 30.03 B II B ) // GAMMA-GLOBULIN , IN SOLUTION , DERIVED FROM HUMAN BLOOD // 0 //

EX 30.03 B II B ) // LYOPHILIZED GAMMA-GLOBULIN DERIVED FROM HUMAN BLOOD // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

32.01 A I // TANNING EXTRACTS OF WATTLE ( MIMOSA ) // 0 //

EX 32.01 A IV // TANNING EXTRACTS DERIVED FROM GAMBIER AND MYROBOLAN FRUITS // 0 //

EX 32.07 B // INORGANIC COLOURING MATTER PREPARATIONS MENTIONED IN NOTE 3 TO CHAPTER 32 , IN HOLLOW POLYURETHANE SPHERES HAVING A DIAMETER OF LESS THAN 200 MICROMETRES // 0 //

EX 32.08 D // GLASS IN THE FORM OF FLAKES OF A LENGTH NOT LESS THAN 0.1 MM AND NOT MORE THAN 3.5 MM OF A THICKNESS NOT LESS THAN TWO AND NOT MORE THAN FIVE MICROMETRES // 0 //

EX 35.07 // BROMELAINS ( INN ) // 0 //

EX 35.07 // MIXTURE OF STREPTOKINASE ( INN ) AND STREPTODORNASE ( INN ) // 0 //

EX 35.07 // PEROXIDASE // 0 //

EX 37.02 B // COLOUR NEGATIVE FILM OF A WIDTH NOT LESS THAN 75 MM AND NOT MORE THAN 105 MM AND OF A LENGTH OF 100 M OR MORE , FOR USE IN THE MANUFACTURE OF INSTANT PICTURE FILM PACKS ( A ) // 0 //

38.07 B // SPIRITS OF SULPHATE TURPENTINE ; CRUDE DIPENTENE // 3 //

38.07 C // SPIRITS OF WOOD TURPENTINE ; TERPENIC SOLVENTS PRODUCED BY THE DISTILLATION OR OTHER TREATMENT OF CONIFEROUS WOODS ; SULPHITE TURPENTINE ; PINE OIL ( EXCLUDING ' PINE OILS ' NOT RICH IN TERPINEOL ) // 3 //

EX 38.08 C // HYDROABIETYL ALCOHOL // 0 //

EX 38.19 G // CATALYSTS CONSISTING OF BIS ( 2-DIMETHYLAMINOETHYL ) ETHER DISSOLVED IN 1.1 ' -OXYDIPROPAN-2-OL // 0 //

EX 38.19 G // CATALYSTS CONSISTING ESSENTIALLY OF DIPHOSPHORUS PENTAOXIDE ON AN INERT SUPPORT // 0 //

EX 38.19 K // SINTERED MAGNESITE MIXED WITH SMALL QUANTITIES OF MINERAL OILS // 0 //

EX 38.19 U // LYOPHILIZED EXTRACT OF THE BLOOD CELLS OF THE CRAB LIMULUS POLYPHEMUS ( LYOPHILIZED LIMULUS AMEBOCYTE LYSATE ) // 0 //

EX 38.19 U // CALCINED BAUXITE ( REFACTORY GRADE ) // 0 //

EX 38.19 U // DIOSGENIN CRUDE // 0 //

EX 38.19 U // 4-(6-FLUORO-2-METHYLINDEN-3-YLMETHYL)PHENYL METHYL SULPHIDE DISSOLVED IN TOLUENE // 0 //

EX 38.19 U // MIXTURE OF X-BUTYL-4,4 ' -ISOPROPLIDENEDIPHENOL AND X,X ' -DIBUTYL-4,4 ' -ISOPROPYLIDENEDIPHENOL // 0 //

EX 38.19 U // MIXTURE OF NITROMETHANE AND 1,2-EPOXYBUTANE // 4 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 38.19 U // REACTION PRODUCTS CONTAINING NOT LESS THAN 55 % BY WEIGHT OF 2-(2-P-CHLOROPHENYLBENZOXAZOL-5-YL ) PROPIONONITRILE // 0 //

EX 38.19 U // RESIDUE OF MANUFACTURE CONTAINING NOT LESS THAN 40 % BY WEIGHT OF 11-BETA , 17,20,21- TETRAHYDROXY-6-METHYLPREGNA-1,4-DIEN-3-ONE 21-ACETATE // 0 //

EX 38.19 U // INTERMEDIATE PRODUCTS FROM THE MANUFACTURE OF MONENSIN SALTS // 0 //

EX 38.19 U // GRAINS CONSISTING OF A MIXTURE OF DIALUMINIUM TRIOXIDE AND ZIRCONIUM DIOXIDE CONTAINING BY WEIGHT NOT LESS THAN 70 % AND NOT MORE THAN 78 % DIALUMINIUM TRIOXIDE AND NOT LESS THAN 19 % AND NOT MORE THAN 26 % ZIRCONIUM DIOXIDE //

7.3 //

EX 38.19 U // GRAINS CONSISTING OF A MIXTURE OF DIALUMINIUM TRIOXIDE AND ZIRCONIUM DIOXIDE CONTAINING BY WEIGHT NOT LESS THAN 54 % AND NOT MORE THAN 62 % DIALUMINIUM TRIOXIDE AND NOT LESS-THAN 36 % AND NOT MORE THAN 44 % ZIRCONIUM DIOXIDE //

7.3 //

EX 38.19 U // N-(2-METHYL-2-NITROPROPYL)-4-NITROSOANILINE CONTAINING NOT LESS THAN 65 % BY WEIGHT OF AN INERT FILLER // 0 //

EX 38.19 U // TETRAMETHYLAMMONIUM HYDROXIDE DISSOLVED IN METHANOL // 0 //

EX 39.01 A // COLESTIPOL HYDROCHLORIDE ( INNM ) // 0 //

EX 39.01 C III AND EX 39.03 B II B ) 2 , III B ) 4 AA ) AND IV B ) 4 AA ) // WASTE AND SCRAP OF PHOTOGRAPHIC ( INCLUDING CINEMATOGRAPHIC ) AND X-RAY FILM // 0 //

EX 39.01 C III // WASTE AND SCRAP OF POLYESTER SHEETS COATED WITH TUNGSTEN COMPOUNDS // 0 //

EX 39.01 C III // FILM BASE , IN ROLLS , OF POLYETHYLENE TEREPHTHALATE , FOR CINEMATOGRAPHY OR PHOTOGRAPHY ( INCLUDING RADIOGRAPHY ) // 8 //

EX 39.01 C VII // POLYIMIDE SHEET AND STRIP , WHETHER OR NOT IN ROLLS // 0 //

EX 39.01 C VII // ALPHA-4-HYDROXYBUTYL-OMEGA-HYDROXYPOLY ( OXYTETRAMETHYLENE ) // 0 //

EX 39.01 C VII // POLYETHYLENE OXIDE HAVING A MOLECULAR WEIGHT OF NOT LESS THAN 4 000 000 // 8 //

EX 39.01 C VII // POLYOXY ( 2.6-DIBROMO-1.4-PHENYLENE ) FOR USE IN THE MANUFACTURE OF POLYAMIDE ( A ) // 0 //

EX 39.02 C 1 ( B ) // TRANSPARENT POLYETHYLENE FILM WHICH WILL SPLIT LONGITUDINALLY WHEN STRETCHED AT RIGHT ANGLES TO THIS LENGTH , AND HAVING A DENSITY OF NOT LESS THAN 0.925 G/CC AND YIELDING NOT LESS THAN 11.5 G/M2 AND NOT MORE THAN 18.8 G/M2 FOR THE MANUFACTURE OF TYPEWRITER RIBBON ( A ) // 0 //

EX 39.02 C II // MICROPOROUS POLYTETRAFLUORETHYLENE FILM , NOT LESS THAN 30 CM IN WIDTH AND WEIGHING NOT MORE THAN 22.4 G/M2 WHETHER OR NOT IN ROLLS // 0 //

EX 39.02 C III // POLYSULPHOHALOETHYLENES IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( A ) AND ( B ) TO CHAPTER 39 // 4 //

EX 39.02 C VI ( A ) ( B ) // COPOLYMERS SOLELY OF ALLYL ALCOHOL WITH STYRENE , WHICH HAVE AN ACETYL VALUE OF NOT LESS THAN 175 // 0 //

EX 39.02 C VII ( B ) // POLYVINYL CHLORIDE SHEETING , WHETHER OR NOT IN ROLLS , OF A THICKNESS LESS THAN 1 MM AND COATED WITH AN ADHESIVE IN WHICH ARE EMBEDDED HOLLOW GLASS BALLS HAVING A DIAMETER OF NOT LESS THAN 50 AND NOT MORE THAN 100 MICROMETRES // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 39.02 C VIII // COPOLYMERS OF VINYLIDENE CHLORIDE WITH VINYL CHLORIDE , CONTAINING NOT LESS THAN 79.5 % BY WEIGHT OF VINYLIDENE CHLORIDE , IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( A ) AND ( B ) TO CHAPTER 39 , FOR THE MANUFACTURE OF FIBRES , MONOFIL OR STRIP ( A ) // 0 //

EX 39.02 C XII // POLY(2-DIETHYLAMINOETHYL METHACRYLATE ) DISSOLVED IN N.N-DIMETHYLACETAMIDE , WITH A POLYMER CONTENT OF NOT LESS THAN 55 % BY WEIGHT // 0 //

EX 39.02 C XII // COPOLYMER OF 2-DI-ISOPROPYLAMINOETHYL METHACRYLATE AND DECYL METHACRYLATE DISSOLVED IN N.N-DIMETHYLACETAMIDE , WITH A COPOLYMER CONTENT OF NOT LESS THAN 55 % BY WEIGHT // 0 //

EX 39.02 C XII // POLYACRYLIC ACID FOR USE AS A THICKENER IN TEXTILE PIGMENT PRINTING PASTES ( A ) // 0 //

EX 39.02 C XIV A ) // ALTERNATING COPOLYMER OF ETHYLENE AND MALEIC ANHYDRIDE FOR USE AS A THICKENER IN TEXTILE PIGMENT PRINTING PASTES ( A ) // 0 //

EX 39.02 C XIV A ) // COPOLYMERS OF VINYLIDENE CHLORIDE AND ACRYLONITRILE IN THE FORM OF EXPANDABLE BEADS OF A DIAMETER NOT LESS THAN FOUR AND NOT MORE THAN 20 MICROMETRES // 0 //

EX 39.02 C XIV A ) // COPOLYMERS OF VINYL CHLORIDE WITH VINYL ACETATE AND VINYL ALCOHOL CONTAINING BY WEIGHT NOT LESS THAN 89 % AND NOT MORE THAN 92 % OF VINYL CHLORIDE , NOT LESS THAN 2 % AND NOT MORE THAN 6 % OF VINYL ACETATE AND NOT LESS THAN 4 % AND NOT MORE THAN 8 % OF VINYL ALCOHOL , IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( A ) AND ( B ) TO CHAPTER 39 // 0 //

EX 39.02 C XIV A ) // FLUORINATED ETHYLENE PROPYLENE COPOLYMERS , FOR THE MANUFACTURE OF FLAT ( RIBBON ) CABLE , CONTAINING NOT LESS THAN 60 CORES ( A ) // 0 //

EX 39.02 C XIV A ) // POLY(L-ETHYLETHYLENE ) ( POLYBUTENE-1 ) IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( B ) TO CHAPTER 39 // 0 //

EX 39.02 C XIV A ) // POLYMERIZATION PRODUCT OF ACRYLIC ACID WITH SMALL QUANTITIES OF A POLYUNSATURATED MONOMER FOR USE AS A THICKENER IN TEXTILE PIGMENT PRINTING PASTES ( A ) // 0 //

EX 39.02 C XIV ( B ) // POLYVINYL FLUORIDE SHEET , WHETHER OR NOT IN ROLLS // 0 //

39.03 B V A ) 1 // ETHYLCELLULOSE , NOT PLASTICIZED // 4 //

EX 39.03 B V A ) 2 // ETHYLHYDROXYETHYLCELLULOSE , INSOLUBLE IN WATER // 4 //

EX 39.03 B V A ) 2 // HYDROXYPROPYLCELLULOSE // 0 //

EX 39.06 B // 0-(2-HYDROXYETHYL)AMYLOPECTIN HYDROLYSATE // 0 //

EX 39.07 B V D ) // PERFORATED POLYETHYLENE FILM OF A WIDTH OF NOT LESS THAN 4.5 CM AND NET MORE THAN 5.5 CM AND HAVING A MOLECULAR WEIGHT OF NOT LESS THAN 4 000 000 IN ROLLS FOR USE AS CONVEYOR BELTS IN MACHINES FOR MANUFACTURING CIGARS ( A ) // 0 //

EX 41.02 C // LEATHER OF EAST INDIA KIP , WHOLE , WHETHER OR NOT THE HEADS AND LEGS HAVE BEEN REMOVED , EACH WEIGHING MORE THAN 4.5 KG NET AND NOT MORE THAN 8 KG , NOT FURTHER PREPARED THAN VEGETABLE TANNED , WHETHER OR NOT HAVING UNDERGONE FURTHER PRESERVATIVE TREATMENT WITH OIL , BUT OBVIOUSLY UNSUITABLE FOR IMMEDIATE USE IN THE MANUFACTURE OF LEATHER ARTICLES // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

41.03 B I // SHEEP AND LAMBSKIN LEATHER , EXCEPT LEATHER FALLING WITHIN HEADING NO 41.06 OR 41.08 , OTHER NOT FURTHER PREPARED THAN TANNED // 0 //

41.04 B I // GOAT AND KID SKIN LEATHER , EXCEPT LEATHER FALLING WITHIN HEADING NO 41.06 OR 41.08 , OTHER , NOT FURTHER PREPARED THAN TANNED // 0 //

41.05 B I // OTHER KINDS OF LEATHER , EXCEPT LEATHER FALLING WITHIN HEADING NO 41.06 OR 41.08 , OTHER , NOT FURTHER PREPARED THAN TANNED // 0 //

EX 44.22 B // USED CASKS AND BARRELS OF OAK , WHETHER ASSEMBLED OR NOT ; THEIR STAVES AND HEADS // 0 //

EX 44.28 D II // SHINGLES FOR ROOFS AND WALLS OF CONIFEROUS WOOD // 0 //

45.01 // NATURAL CORK , UNWORKED , CRUSHED , GRANULATED OR GROUND ; WASTE CORK // 0 //

45.02 // NATURAL CORK IN BLOCKS , PLATES , SHEETS OR STRIPS ( INCLUDING CUBES OR SQUARE SLABS , CUT TO SIZE FOR CORKS OR STOPPERS ) // 4 //

EX 49.11 B // MICROCOPIES ON AN OPAQUE BASE FOR DATA BANKS AND LIBRARIES ( A ) // 0 //

EX 49.11 B // ARTISTS ' SCREEN PRINTS ( COMMONLY DESCRIBED AS SERIGRAPHS ), SIGNED BY THE ARTIST AND NUMBERED FROM 1 TO 200 // 0 //

EX 51.01 A // YARN WHOLLY OF POLYGLYCOLLIC ACID // 0 //

EX 51.01 A // YARN OF POLYTETRAFLUOROETHYLENE // 0 //

EX 51.01 A // YARN OF POLYVINYL ALCOHOL , SOLUBLE IN WATER AT A TEMPERATURE OF 50 * C FOR USE IN THE MANUFACTURE OF WEFTLESS ' FELTS ' FOR PAPERMAKING MACHINES ( A ) // 0 //

EX 51.02 A I // MONOFIL OF POLYTETRAFLUOROETHYLENE // 0 //

EX 51.02 A II // POLYIMIDE STRIP , WHETHER OR NOT IN ROLLS // 0 //

EX 51.02 A II // STRIP OF POLYTETRAFLUOROETHYLENE , WHETHER OR NOT IN ROLLS WITH AN EXTENSION AT BREAK NOT EXCEEDING 25 % // 0 //

EX 51.04 A IV // WOVEN FABRICS OF POLYVINYL ALCOHOL FIBRES FOR MACHINE EMBROIDERY // 0 //

EX 54.03 B I A ) // UNBLEACHED LINEN YARN ( EXCLUDING YARN OF FLAX TOW ), MEASURING PER KG 30 000 M OR LESS , FOR THE MANUFACTURE OF MULTIPLE OR CABLED YARNS FOR THE FOOTWEAR INDUSTRY OR FOR WHIPPING CABLES ( A ) // 0 //

EX 56.01 A // TEXTILE FIBRES OF POLYTETRAFLUOROETHYLENE // 0 //

EX 58.01 B // CARPETS , CARPETING AND RUGS , OF SILK OR OF WASTE SILK OTHER THAN NOIL , OF WHICH THE PILE CONTAINS NOT LESS THAN 85 % BY WEIGHT OF SILK OR WASTE SILK OTHER THAN NOIL ( B ) // 20 WITH A MAXIMUM DUTY OF 4 EUA PER M2 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

( B ) THE ADDITIONAL NOTE TO CHAPTER 58 SHALL APPLY HERE .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 58.07 A // BRAID WHOLLY OF POLYGLYCOLLIC ACID YARN // 0 //

EX 59.03 // BONDED FIBRE FABRICS AND SIMILAR BONDED YARN FABRICS OF AROMATIC POLYAMIDE MAN-MADE FIBRES OBTAINED BY POLYCONDENSATION OF M-PHENYLENE-DIAMINE AND ISOPHTHALIC ACID // 0 //

EX 59.04 // COIR YARN , FOR THE MANUFACTURE OF CARPETS , CARPETING AND RUGS , MATS AND THE LIKE ( A ) // 0 //

EX 59.17 D // YARN AND STRIP OF IMPREGNATED POLYTETRAFLUOROETHYLENE , WHETHER OR NOT OILED ORGRAPHITED // 0 //

62.03 B I A ) // SACKS AND BAGS OF THE KIND USED FOR THE PACKING OF GOODS , USED , OF FLAX OR OF SISAL // 0 //

EX 68.02 B // ARTIFICIALLY COLOURED GRANULES AND CHIPPINGS // 0 //

EX 69.09 B // CATALYST SUPPORTS , CONSISTING OF POROUS CORDIERITE CERAMIC PIECES OF ROUGHLY CIRCULAR OR OVAL CROSS-SECTION WITH PARALLEL SIDES , HAVING AN OVERALL VOLUME OF NOT LESS THAN 240 ML AND NOT MORE THAN 11 100 ML , AND HAVING A MINIMUM DIMENSION OF NOT LESS THAN 70 MM AND A MAXIMUM DIMENSION OF NOT MORE THAN 480 MM , HAVING NOT LESS THAN 28 CONTINUOUS CHANNELS PER 100 MM2 RUNNING PARALLEL TO THE MAIN AXIS OF SYMMETRY , THE TOTAL CHANNEL CROSS-SECTION AREA BEING NOT LESS THAN 50 % AND NOT MORE THAN 80 % OF THE WHOLE CROSS-SECTION AREA // 0 //

EX 70.19 A IV B ) // GLASS BEADS OF A DIAMETER OF LESS THAN 0.1 MM AND WITH A REFRACTIVE INDEX OF 2.26 // 0 //

EX 70.20 A // MATS OF NON-TEXTILE GLASS FIBRES OF A WEIGHT PER SQUARE METRE OF NOT MORE THAN 100 G AND A FIBRE DIAMETER OF NOT MORE THAN SEVEN MICROMETRES // 0 //

EX 70.20 B // GLASS-FIBRE YARNS , WITH A FILAMENT DIAMETER OF NOT MORE THAN FOUR MICROMETRES , FOR THE MANUFACTURE OF CARPETS ( A ) // 0 //

EX 70.20 B // YARNS OF 33 TEX OR A MULTIPLE THEREOF OBTAINED FROM CONTINUOUS SPUN GLASS FILAMENTS HAVING A DIAMETER OF NOT LESS THAN 2.5 AND NOT MORE THAN 5.1 MICROMETRES OTHER THAN THOSE TREATED SO AS TO IMPROVE THEIR ADHESION TO ELASTOMERS // 0 //

EX 75.04 A // TUBES OF NICKEL , NOT ALLOYED , OF A PURITY NOT LESS THAN 99 % , NOT DEVIATING FROM STRAIGHTNESS LENGTHWISE BY MORE THAN 1 MM PER 150 CM OF LENGTH , AND WITH AN OUTSIDE DIAMETER EITHER : //

// - NOT LESS THAN 213.36 MM AND NOT MORE THAN 214 MM , OR //

// - NOT LESS THAN 209.95 MM AND NOT MORE THAN 210.59 MM , OR //

// - NOT LESS THAN 168.28 MM AND NOT MORE THAN 168.78 MM // 0 //

76.01 B I B ) // WASTE OF ALUMINIUM OTHER ( INCLUDING FACTORY REJECTS ) // 0 //

EX 76.03 // ALUMINIUM ALLOY STRIP IN COILS , CONTAINING NOT LESS THAN 18 % BY WEIGHT AND NOT MORE THAN 23 % BY WEIGHT OF TIN AND NOT LESS THAN 0.7 % BY WEIGHT AND NOT MORE THAN 1.5 % BY WEIGHT OF COPPER AS THE MAJOR ALLOYING ELEMENTS AND HAVING A WIDTH OF NOT LESS THAN 75 AND NOT MORE THAN 230 MM AND A THICKNESS OF NOT LESS THAN 3 AND NOT MORE THAN 6.5 MM // 0 //

EX 81.03 B // WIRE OF UNALLOYED TANTALUM , OF A DIAMETER NOT LESS THAN 0.25 MM AND NOT MORE THAN 0.5 MM , FOR THE MANUFACTURE OF CAPACITORS ( A ) // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .

****

// //

CCT HEADING NO // DESCRIPTION // RATE OF AUTONOMOUS DUTY ( % ) //

EX 81.04 D I B ) // CHROMIUM , IN THE FORM OF CATHODE CHIPS , PELLETS OR BRIQUETTES , WHICH CONTAINS NOT MORE THAN 0.10 % BY WEIGHT OF TOTAL OXYGEN , NOT MORE THAN 0.015 % BY WEIGHT OF TOTAL ALUMINIUM AND NOT MORE THAN 0.001 % BY WEIGHT OF ALUMINIUM COMPOUNDS INSOLUBLE IN BOILING 5N HYDROCHLORIC ACID AND IN BOILING FUMING PERCHLORIC ACID , AND EVALUATED AS ALUMINIUM , FOR THE PRODUCTION OF ALLOY FOR THE MANUFACTURE OF THE FOLLOWING PARTS OF GAS TURBINES AND JET ENGINES ( A ): //

// - BLADES , FIXED OR MOVABLE , INCLUDING THEIR RINGS //

// - VANES //

// - NOZZLES // 0 //

EX 81.04 G I // ELECTROLYTIC MANGANESE OF A PURITY OF AT LEAST 99.7 % , FOR THE CHEMICAL INDUSTRY ( A ) // 0 //

EX 81.04 K I // WASTE AND SCRAP TITANIUM // 0 //

EX 81.04 K I // TITANIUM SPONGE // 0 //

EX 84.51 A // TYPEWRITERS WITH BRAILLE CHARACTERS // 0 //

EX 84.59 B // INTEGRALLY FORGED , ROUGH-TURNED COMPONENTS WITH UNIT WEIGHTS OF MORE THAN 150 TONNES , FOR REACTOR PRESSURE VESSELS // 0 //

EX 84.63 D // FORGED AND ROUGHLY SHAPED GENERATOR AND TURBINE SHAFTS OF A WEIGHT EXCEEDING 180 TONNES // 0 //

EX 85.13 B // SONIC CONVERTORS CONSISTING OF A BOX APPROXIMATELY 28 CM LONG , APPROXIMATELY 13 CM BROAD AND APPROXIMATELY 10 CM HIGH THE TOP BEING SHAPED IN THE FORM OF A CRADLE TO RECEIVE A TELEPHONE HANDSET , INCORPORATING A LAMP TO INDICATE THE STATE OF CALL . THIS MODEM ( MODULATOR/DEMODULATOR ) CONVERTS TELEPRINTER KEYBOARD SIGNALS FOR TRANSMISSION BY TELEPHONE LINE OR RADIO FOR RECONVERSION TO KEYBOARD SIGNALS ON A DISTANT TELEPRINTER // 0 //

EX 90.01 B // MATERIAL CONSISTING OF A POLARIZING FILM , SUPPORTED ON ONE OR BOTH SIDES BY TRANSPARENT MATERIAL // 0 //

EX 90.19 A III // VASCULAR PROSTHESES // 0 //

EX 90.19 B II // READING APPLIANCES FOR THE BLIND , IN WHICH A MINIATURE CAMERA USING PHOTO-TRANSISTORS TRANSMITS LETTERS ONTO A SCANNING BORD WITH PIEZO-ELECTRIC PENCILS , AND ITS PARTS AND ACCESSORIES // 0 //

( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .