Council Regulation (EEC) No 1533/81 of 19 May 1981 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial products
Avis juridique important
Council Regulation (EEC) No 1533/81 of 19 May 1981 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial products Official Journal L 155 , 13/06/1981 P. 0001 - 0023
++++
COUNCIL REGULATION ( EEC ) NO 1533/81
OF 19 MAY 1981
TEMPORARILY SUSPENDING THE AUTONOMOUS COMMON CUSTOMS TARIFF DUTIES ON CERTAIN INDUSTRIAL PRODUCTS
THE COUNCIL OF THE EUROPEAN COMMUNITIES ,
HAVING REGARD TO THE TREATY ESTABLISHING THE EUROPEAN ECONOMIC COMMUNITY , AND IN PARTICULAR ARTICLE 28 THEREOF ,
HAVING REGARD TO THE DRAFT REGULATION SUBMITTED BY THE COMMISSION ,
WHEREAS PRODUCTION OF THE PRODUCTS REFERRED TO IN THIS REGULATION IS AT PRESENT INADEQUATE OR NON-EXISTENT WITHIN THE COMMUNITY AND PRODUCERS ARE THUS UNABLE TO MEET THE NEEDS OF USER INDUSTRIES IN THE COMMUNITY ;
WHEREAS IT IS IN THE COMMUNITY'S INTEREST TO SUSPEND THE AUTONOMOUS COMMON CUSTOMS TARIFF DUTIES ONLY PARTIALLY IN CERTAIN CASES , DUE PARTICULARLY TO THE EXISTENCE OF COMMUNITY PRODUCTION , AND TO SUSPEND THEM COMPLETELY IN OTHER CASES ;
WHEREAS , TAKING ACCOUNT OF THE DIFFICULTIES INVOLVED IN ACCURATELY ASSESSING THE DEVELOPMENT OF THE ECONOMIC SITUATION IN THE SECTORS CONCERNED IN THE NEAR FUTURE , THESE SUSPENSION MEASURES SHOULD BE TAKEN ONLY TEMPORARILY WITH THEIR TERM OF VALIDITY FIXED TO COINCIDE WITH THE INTERESTS OF COMMUNITY PRODUCTION ,
HAS ADOPTED THIS REGULATION :
Article1¶
THE AUTONOMOUS COMMON CUSTOMS TARIFF DUTIES FOR THE PRODUCTS LISTED IN THE TABLES ANNEXED TO THIS REGULATION SHALL BE SUSPENDED AT THE LEVEL INDICATED IN RESPECT OF EACH OF THEM .
THESE SUSPENSIONS SHALL BE VALID :
- FROM 1 JULY TO 31 DECEMBER 1981 FOR THE PRODUCTS LISTED IN TABLE I ,
- FROM 1 JULY 1981 TO 30 JUNE 1982 FOR THE PRODUCTS LISTED IN TABLE II .
Article2¶
THIS REGULATION SHALL ENTER INTO FORCE ON 1 JULY 1981 .
THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES .
DONE AT BRUSSELS , 19 MAY 1981 .
FOR THE COUNCIL
THE PRESIDENT
D . F . VAN DER MEI
ANNEX
TABLE I
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 29.04 A III A ) *2-METHYLPROPAN-2-OL ( TERT-BUTYL ALCOHOL ) WITH A PURITY OF NOT LESS THAN 90 % BUT NOT MORE THAN 96 % BY WEIGHT*0*
EX 29.08 A III C ) *2-BROMO-6-METHOXYNAPHTHALENE*0*
EX 29.11 C II*A MIXTURE OF 3-O-CUMENYL-2-METHYLPROPIONALDEHYDE AND 3-P-CUMENYL-2-METHYLPROPIONALDEHYDE ( CYCLAMEN ALDEHYDE ) *0*
EX 29.16 A II*L-MALIC ACID AND ITS SALTS AND ESTERS*0*
EX 29.19 C*2,2-BIS(CHLOROMETHYL ) TRIMETHYLENE TETRAKIS(2-CHLOROETHYL ) BIS(PHOSPHATE)*5*
EX 29.19 C AND EX 38.19 U*TETRAKIS(2-CHLOROETHYL ) ETHYLENE BIS ( PHOSPHATE ) *5*
EX 29.22 D I*3,5-DICHLOROANILINE*6,3*
EX 29.23 A II*1-DEOXY-1-(OCTYLAMINO)-D-GLUCITOL*7,1*
EX 29.25 A II*2-ACRYLAMIDO-2-METHYLPROPANESULPHONIC ACID*0*
EX 29.25 B III B ) *BENDIOCARB ( ISO ) *0*
EX 29.27*4-BROMOPHENYLACETONITRILE*0*
EX 29.31 B*BIOSYNTHETIC PEPTIDE HAVING THE STRUCTURE OF THE " A " CHAIN OF HUMAN INSULIN , IN THE FORM OF A SALT OF THE S-SULPHONATE DERIVATIVE*0*
EX 29.31 B*4,4'-SULPHONYLDIPHENOL , NOT LESS THAN 99,5 % PURE*0*
EX 29.34 C*TRICHLORONAT ( ISO ) *0*
EX 29.35 Q*BIOSYNTHETIC PEPTIDE HAVING THE STRUCTURE OF THE " B " CHAIN OF HUMAN INSULIN , IN THE FORM OF A SALT OF THE S-SULPHONATE DERIVATIVE*0*
EX 29.35 Q*DIAZOXIDE ( INN ) *0*
EX 29.35 Q*(6R,7R)-7-AMINO-3-(5-METHYL-1,3,4-THIADIAZOL - 2-YLTHIOMETHYL)-8-OXO-5-THIA-1-AZABICYCLO(4.2.0)OCT-2-ENE - 2-CARBOXYLIC ACID AND ITS SALTS*0*
EX 29.35 Q*TOLMETIN SODIUM ( INNM ) *0*
EX 29.39 D II*BETAMETHASONE 17,21-DIPROPIONATE ( INNM ) *0*
EX 29.39 D II*METHYLPREDNISOLONE ( INN ) *8*
EX 29.39 D II*TRIAMCINOLONE HEXACETONIDE ( INN ) *6,6*
EX 29.39 D II*DIFLORASONE DI ( ACETATE ) ( INNM ) *0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 29.44 C*CEFOXITIN SODIUM ( INNM ) *0*
EX 29.44 C*CEFRADINE ( INN ) *0*
EX 29.44 C*CEFAMANDOL ( INN ) AND ITS SALTS AND ESTERS*0*
EX 29.44 C*CEFAZOLIN ( INN ) AND ITS SALTS*0*
EX 29.44 C*(6R , 7R)-7-(2-CARBOXY-2 - ( 4-HYDROXYPHENYL)ACETAMIDO)-7-METHOXY-3 - ( 1-METHYL-1H-TETRAZOL-5-YLTHIOMETHYL)-8-OXO-5-OXA-1 - AZABICYCLO(4.2.0)-OCT-2-ENE-2-CARBOXYLIC ACID AND ITS SALTS AND ESTERS*0*
EX 38.03 B*ACID ACTIVATED MONTMORILLONITE WHICH , WHEN EXAMINED BY X-RAY POWDER DIFFRACTION , SHOWS FOUR PRINCIPAL LINES CORRESPONDING TO CRYSTAL INTERPLANE SPACING ( D VALUES ) OF 0,44 , 0,40 , 0,33 AND 0,25 NM THE LINE CORRESPONDING TO 0,40 NM BEING THE MOST INTENSE , FOR THE MANUFACTURE OF SELF-COPY PAPER ( A)*0*
38.07 A*GUM SPIRITS OF TURPENTINE*3*
38.07 B*SPIRITS OF SULPHATE TURPENTINE ; CRUDE DIPENTENE*3*
38.07 C*SPIRITS OF WOOD TURPENTINE ; TERPENIC SOLVENTS PRODUCED BY THE DISTILLATION OR OTHER TREATMENT OF CONIFEROUS WOODS ; SULPHITE TURPENTINE ; PINE OIL ( EXCLUDING " PINE OILS " NOT RICH IN TERPINEOL ) *3*
EX 38.08 C*ROSIN HYDROGENATED , POLYMERIZED , DIMERIZED OR OXODIZED*5*
EX 38.19 G*CATALYSTS IN THE FORM OF RODLETS HAVING A DIAMETER OF NOT LESS THAN 1,5 MM AND NOT MORE THAN 9,5 MM , CONTAINING NOT LESS THAN 60 % BY WEIGHT OF DIIRONTRIOXIDE , NOT LESS THAN 8 % BY WEIGHT OF DIPOTASSIUMOXIDE AND NOT LESS THAN 2 % BY WEIGHT OF DICHROMIUMTRIOXIDE , FOR USE IN THE PRODUCTION OF STYRENE FROM ETHYLBENZENE ( A)*0*
EX 38.19 G*CATALYSTS CONSISTING OF A MIXTURE OF OXIDES ON AN SILICON DIOXIDE SUPPORT AND CONTAINING BY WEIGHT : **
* ( A ) NOT LESS THAN 25 % AND NOT MORE THAN 40 % OF ANTIMONY**
* ( B ) NOT LESS THAN 5 % AND NOT MORE THAN 10 % OF IRON**
* ( C ) NOT LESS THAN 0,2 % AND NOT MORE THAN 1,5 % OF MOLYBDENUM**
* ( D ) NOT LESS THAN 0,8 % AND NOT MORE THAN 4,0 % OF TELLURIUM*0*
EX 38.19 G*CATALYSTS IN THE FORM OF RODLETS HAVING A LENGTH OF NOT MORE THAN 5,0 MM AND IN DIAMETER OF NOT MORE THAN 3,6 MM CONSISTING OF COPPER OXIDE AND DICHROMIUM TRIOXIDE*0*
EX 38.19 G*CATALYSTS , IN THE FORM OF GRANULES OR RINGS HAVING A DIAMETER OF NOT LESS THAN 3 MM AND MORE THAN 10 MM , CONSISTING OF SILVER SUPPORTED ON ALUMINIUM OXIDE , THE SILVER CONTENT BEING NOT LESS THAN 10 % AND NOT MORE THAN 20 % BY WEIGHT*0*
EX 38.19 G*CATALYSTS CONSISTING OF COPPER CHLORIDE SUPPORTED ON ALUMINIUM OXIDE FOR THE PREPARATION OF DICHLOROETHANE FROM ETHYLENE , HYDROCHLORIC ACID AND OXYGEN , WITH A SURFACE AREA OF LESS THAN 90 M2/G ( A)*0*
EX 38.19 U*DIBUTYLMAGNESIUM DISSOLVED IN ORGANIC SOLVENTS TO A CONCENTRATION OF LESS THAN 28 % BY WEIGHT*0*
EX 38.19 U*FLAME RETARDANT REACTION PRODUCTS OF ACETALDEHYDE , ETHYLENE OXIDE AND PHOSPHOROUS TRICHLORIDE*0*
EX 39.01 C III A ) *REFLECTING POLYESTER SHEETING , WHETHER OR NOT IN ROLLS*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 39.01 C V*POLYURETHANE REFLECTING SHEETING WHETHER OR NOT IN ROLLS*0*
EX 39.01 C VII*ALPHA-4-HYDROXYBUTHYL-OMEGA-HYDROXYPOLY ( OXYTETRAMETHYLENE ) *0*
EX 39.02 C I B ) *TRANSPARENT POLYETHYLENE FILM WHICH WILL SPLIT LONGITUDINALLY WHEN STRETCHED AT RIGHT ANGLES TO ITS LENGTH , AND HAVING A DENSITY OF NOT LESS THAN 0,925 GM/CC AND YIELDING NOT LESS THAN 7 G/M2 AND NOT MORE THAN 19 G/M2 , FOR THE MANUFACTURE OF TYPEWRITER RIBBON ( A)*0*
EX 39.02 C VI B ) *REFLECTING FOIL OF A TERPOLYMER OF VINYL CHLORIDE WITH STYRENE AND AN ACRYLIC ESTER EMBOSSED ON ONE SIDE WITH A REGULAR PATTERN ON WHICH THERE IS A THIN LAYER OF ALUMINIUM WHETHER OR NOT IN ROLLS*0*
EX 39.02 C VII B ) *REFLECTING POLYVINYL CHLORIDE SHEETING WHOLLY EMBOSSED ON ONE SIDE IN A REGULAR PYRAMIDAL PATTERN , WHETHER OR NOT IN ROLLS*0*
EX 39.02 C XIV A ) *TERPOLYMER OF ETHYLENE , METHYL ACRYLATE AND A MONOMER CONTAINING A NON-TERMINAL CARBOXY GROUP AS A SUBSTITUENT , COMPOUNDED WITH SILICA*12,5*
EX 39.02 C XIV A ) *ALTERNATING COPOLYMER OF ETHYLENE AND MALEIC ANHYDRIDE FOR USE AS A THICKENER IN TEXTILE PIGMENT PRINTING PASTES ( A)*0*
EX 39.02 C XIV A ) *POLYMERIZATION PRODUCTS OF ACRYLIC ACID WITH SMALL QUANTITIES OF A POLYUNSATURATED MONOMER FOR USE AS A THICKENER IN TEXTILE PIGMENT PRINTING PASTES ( A)*5*
EX 39.02 C XIV B ) *SHEETS CONSISTING OF A WOVEN TEXTILE FABRIC COVERED ON BOTH SIDES WITH A COPOLYMER OF POLY(TETRAFLUOROETHYLENE ) AND POLY(OXY(PERFLUORO-2-METHYLETHYLENE )) WITH TERMINAL CARBOXYL GROUPS , WHETHER OR NOT IN ROLLS*0*
EX 44.28 C*MATCH SPLINTS MANUFACTURED FROM ASPEN ( POPULUS TREMULOIDES ) FOR THE MANUFACTURE OF MATCHES , NOT REQUIRING A SPECIFIC STRIKING SURFACE ( SO CALLED " STRIKE-ANYWHERE " MATCHES ) ( A)*0*
EX 51.01 A*YARN OF A COPOLYMER OF GLYCOLLIC ACID LACTIC ACID FOR THE MANUFACTURE OF SURGICAL SUTURES ( A)*0*
EX 51.01 A*YARN WHOLLY OF POLYGLYCOLLIC ACID*0*
EX 51.01 A*YARN OF POLY(P-PHENYLENETEREPHTHALAMIDE ) , FOR USES OTHER THAN THE MANUFACTURE OF TYRES ( A)*2*
EX 51.01 A*YARN OF POLY(1,4-DIOXANONE)*0*
EX 51.02 A I*MONOFIL OF POLY(1,4-DIOXANONE)*0*
EX 56.01 A AND EX 59.01 B I*FIBRES OF POLY(P-PHENYLENETEREPHTHALAMIDE)*2*
EX 58.07 A AND EX 59.04*BRAID WHOLLY OF POLYGLYCOLLIC ACID YARN*0*
EX 58.07 A AND EX 59.04*BRAID OF YARN OF A COPOLYMER OF GLYCOLLIC ACID AND LACTIC ACID , WHETHER OR NOT COATED , FOR THE MANUFACTURE OF SURGICAL SUTURES ( A)*0*
EX 59.17 A*NEEDLE PUNCHED SYNTHETIC FIBRE FELTS ON A WOVEN SYNTHETIC FIBRE BASE COATED OR COVERED ON ONE SIDE WITH POLYTETRAFLUOROETHYLENE FILM , FOR THE MANUFACTURE OF FILTRATION PRODUCTS ( A)*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 59.17 D*YARN OF IMPREGNATED POLY(P-PHENYLENETEREPHTHALAMIDE ) , OILED*0*
EX 70.20 B*YARNS OF 34 TEX OR A MULTIPLE THEREOF OBTAINED FROM CONTINUOUS SPUN GLASS FILAMENTS HAVING A DIAMETER OF NOT LESS THAN 5,2 AND NOT MORE THAN 6,2 MICROMETRES , OTHER THAN THOSE TREATED SO AS TO IMPROVE THEIR ADHESION TO ELASTOMERS*6,3*
EX 70.20 B*YARNS OF 33 TEX OR A MULTIPLE THEREOF OBTAINED FROM CONTINUOUS SPUN GLASS FILAMENTS HAVING A DIAMETER OF NOT LESS THAN 5,8 AND NOT MORE THAN 6,4 MICROMETRES , OTHER THAN THOSE TREATED SO AS TO IMPROVE THEIR ADHESION TO ELASTOMERS*6,3*
EX 84.18 C II B ) *APPARATUS , FOR THE SEPARATION OF GAS FROM GAS MIXTURES , OF A TOTAL LENGTH OF NOT LESS THAN 375 CM AND NOT MORE THAN 690 CM CONSISTING ESSENTIALLY OF A METAL CYLINDER , WHOSE DIAMETER IS NOT LESS THAN 10,5 CM AND NOT MORE THAN 22,5 CM , CONTAINING BUNDLES OF HOLLOW PERMEABLE FIBRES*0*
EX 84.55 C*OPTO-ELECTRIC ENCODER FOR ELECTRONIC TYPEWRITERS CONSISTING OF ELECTRONIC CIRCUITS , A LIGHT-EMITTING DIODE ( LED ) , A ROTATING DISC WITH RADIAL OPENINGS , A FIXED MASK AND A SINGLE CHIP PHOTOVOLTAIC CELL , CONTAINED IN TWO PLASTIC SHELLS FORMING A HOUSING OF A SIZE NOT EXCEEDING 60 BY 48 BY 16 MM*0*
EX 85.19 B*POTENTIOMETERS , CONTAINED IN A HOUSING WHOSE DIAMETER DOES NOT EXCEED 4,5 MM , WHETHER OR NOT FITTED WITH AN ON/OFF SWITCH , FOR THE MANUFACTURE OF PRODUCTS FALLING UNDER TARIFF SUBHEADING 90.19 B I ( A)*0*
EX 85.21 A V*DIGITAL DISPLAYS IN THE FORM OF A TUBE CONSISTING OF A GLASS HOUSING MOUNTED ON A BOARD WHOSE DIMENSIONS DO NOT EXCEED 350 BY 300 MM EXCLUDING LEADS . THE TUBE CONTAINS ONE OR MORE ROWS OF CHARACTERS OR LINES ARRANGED IN ROWS , EACH CHARACTER OR LINE CONSISTING OF FLUORESCENT OR PHOSPHORESCENT ELEMENTS . THESE ELEMENTS ARE MOUNTED ON A METALLIZED BASE WHICH IS COVERED WITH FLUORESCENT OR PHOSPHORESCENT SUBSTANCES WHICH GIVE OFF LIGHT WHEN BOMBARDED WITH ELECTRONS*0*
EX 85.21 D II*DIGITAL DISPLAYS CONSISTING OF A PRINTED CIRCUIT BOARD OF A SIZE NOT EXCEEDING 35 BY 90 MM WITH A SINGLE LINE OF DIGITS , NOT LESS THAN THREE IN NUMBER COMPRISING LIGHT-EMITTING DIODES MANUFACTURED FROM GALLIUM-BASED SEMI-CONDUCTOR COMPOUNDS MOUNTED THEREON . EACH DIGIT IS COMPOSED OF SEVEN SEGMENTS PLUS A DECIMAL POINT AND THE LINE OF DIGITS HAS A PROTECTIVE COVER OF TRANSPARENT PLASTIC*0*
EX 85.21 D II*DIGITAL DISPLAYS , CONSISTING OF A PRINTED CIRCUIT BOARD OF A SIZE NOT EXCEEDING 35 BY 90 MM WITH A SINGLE LINE OF CHARACTERS NOT LESS THAN TWO IN NUMBER COMPRISING LIGHT-EMITTING DIODES MADE FROM GALLIUM-BASED SEMI-CONDUCTOR COMPOUNDS MOUNTED THEREON . EACH CHARACTER IS COMPOSED OF UP TO EIGHT SEGMENTS AND THE LINE OF CHARACTERS HAS A PROTECTIVE COVER OF TRANSPARENT PLASTIC*0*
EX 85.21 D II*ELECTRONIC PROGRAMMABLE READ ONLY MEMORIES ( EPROMS ) UV ERASABLE , WITH A STORAGE CAPACITY OF 32 K BITS IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONTAINED IN A HOUSING WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 17 BY 39 MM , WITH A QUARTZ WINDOW ON THE UPPER SURFACE , AND BEARING : **
* - AN IDENTIFICATION MARKING EITHER CONSISTING OF ONE OF THE FOLLOWING COMBINATIONS OF FIGURES OR FIGURES AND LETTERS OR INCLUDING ONE OF THOSE COMBINATIONS : **
*2532**
*25 A 32**
*25 L 32**
*2732**
*OR**
* - OTHER IDENTIFICATION MARKINGS RELATING TO EPROMS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*8,5*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DURY ( % ) *
EX 85.21 D II*ELECTRONIC PROGRAMMABLE READ ONLY MEMORIES ( EPROMS ) UV ERASABLE , WITH A STORAGE CAPACITY OF 64 K BITS IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONTAINED IN A HOUSING WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 17 BY 39 MM , WITH A QUARTZ WINDOW ON THE UPPER SURFACE , AND BEARING : **
* - AN IDENTIFICATION MARKING EITHER CONSISTING OF ONE OF THE FOLLOWING COMBINATIONS OF FIGURES OR FIGURES AND LETTERS OR INCLUDING ONE OF THOSE COMBINATIONS : **
*2564**
*68764**
*68 A 764**
*OR**
* - OTHER IDENTIFICATION MARKINGS RELATING TO EPROMS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*5*
EX 85.21 D II*RANDOM ACCESS MEMORIES ( RAMS ) WITH A STORAGE CAPACITY OF 64 K BITS , IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONTAINED IN A HOUSING WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 9 BY 23 MM WITH 16 CONNECTING PINS , AND BEARING : **
* - AN IDENTIFICATION MARKING EITHER CONSISTING OF ONE OF THE FOLLOWING COMBINATIONS OF FIGURES OR INCLUDING ONE OF THOSE COMBINATIONS : **
*3764**
*4164**
*4864**
*6664**
*6665**
*8164**
*OR**
* - OTHER IDENTIFICATION MARKINGS RELATING TO RAMS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*5*
EX 85.21 D II*C-MOS RANDOM ACCESS MEMORIES ( RAMS OF COMPLEMENTARY MOS TECHNOLOGY ) , WITH A STORAGE CAPACITY OF 4 K BITS , IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT , CONTAINED IN A HOUSING WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 11 BY 31 MM WITH 18 , 20 OR 22 CONNECTING PINS , AND BEARING : **
* - AN IDENTIFICATION MARKING EITHER CONSISTING OF ONE OF THE FOLLOWING COMBINATIONS OF FIGURES OR FIGURES AND LETTERS OR INCLUDING ONE OF THOSE COMBINATIONS : **
*21 SC 14**
*4315**
*4334**
*4434**
*M PD 444**
*M PD 445 L**
*5047**
*5104**
*5114 A**
*5115**
*5504**
*5514**
*58981**
*6147**
*6148**
*6504**
*6514**
*6533**
*6543**
*8404 E**
*8414 E**
*OR**
* - OTHER IDENTIFICATION MARKINGS RELATING TO C-MOS RAMS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*10*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 85.21 D II*PROGRAMMABLE , NON-ERASABLE , READ ONLY MEMORIES ( PROMS ) WITH A STORAGE CAPACITY OF 4 K BITS IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONTAINED IN A HOUSING WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 17 BY 34 MM , WITH NOT MORE THAN 24 CONNECTING PINS , AND BEARING : **
* - AN IDENTIFICATION MARKING EITHER CONSISTING OF ONE OF THE FOLLOWING COMBINATIONS OF FIGURES OR FIGURES AND LETTERS OR INCLUDING ONE OF THOSE COMBINATIONS : **
*18 S 42**
*18 S 46**
*18 SA 42**
*18 SA 46**
*24 S 41**
*24 SA 41**
*27 S 15**
*27 S 26**
*27 S 27**
*27 S 28**
*27 S 29**
*27 S 30**
*27 S 31**
*27 S 32**
*27 S 33**
*28 L 42**
*28 L 45**
*28 P 42**
*28 P 45**
*28 R 45**
*28 S 42**
*28 S 45**
*29620**
*29621**
*29622**
*29623**
*29624**
*29625**
*29626**
*29627**
*3604**
*3624**
*3625**
*38510**
*5340**
*5341**
*5348**
*5349**
*5350**
*5351**
*5352**
*5353**
*54 S 472**
*54 S 473**
*54 S 474**
*54 S 475**
*54 S 476**
*54 S 477**
*54 S 572**
*54 S 573**
*54 740**
*54 741**
*5605**
*5625**
*6340**
*6341**
*6348**
*6349**
*6350**
*6351**
*6352**
*6353**
*7121**
*7122**
*7123**
*7125**
*7126**
*74 S 472**
*74 S 473**
*74 S 474**
*74 S 475**
*74 S 476**
*74 S 477**
*74 S 572**
*74 S 573**
*7640**
*7641**
*7642**
*7643**
*7644**
*7645**
*7647**
*7648**
*7649**
*82 S 115**
*82 S 136**
*82 S 137**
*82 S 140**
*82 S 141**
*82 S 142**
*82 S 146**
*82 S 147**
*93 438**
*93 448**
*93 452**
*93 453**
*OR
* - OTHER IDENTIFICATION MARKINGS RELATING TO PROMS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*8,5*
EX 85.21 D II*SINGLE-CHIP MICROCOMPUTER IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONSISTING OF AN 8 BIT CENTRAL PROCESSOR , AND 8 BIT TIMER , 18 INPUT/OUTPUT GATES , A READ ONLY MEMORY ( ROM ) WITH A CAPACITY OF 8 K BITS AND A RANDOM ACCESS MEMORY ( RAM ) WITH A CAPACITY OF 512 BITS , CONTAINED IN A HOUSING , WHOSE EXTERIOR DIMENSIONS ARE 53 BY 14 MM WITH 40 CONNECTING PINS**
*THE PACKAGE BEARS : **
* - ONE OF THE FOLLOWING MARKINGS : **
*D 8041**
*P 8041**
*OR**
* - OTHER MARKINGS RELATING TO MICROCOMPUTERS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*10*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 85.21 D II*P-MOS 12/24-HOUR CLOCK CIRCUIT INCORPORATING AN ELAPSED TIME FACILITY , IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT CONTAINED IN A HOUSING WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 53 BY 14 MM , WITH 40 CONNECTING PINS , FOR THE MANUFACTURE OF INSTRUMENT PANEL CLOCKS AND CLOCKS OF A SIMILAR TYPE FOR VEHICLES ( A )**
*THE PACKAGE BEARS : **
* - THE FOLLOWING IDENTIFICATION MARKING : **
*MM 53124**
*OR**
* - OTHER IDENTIFICATION MARKINGS RELATING TO CLOCK CIRCUITS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*0*
EX 85.21 D II*PROGRAMMABLE , NON-ERASABLE , READ ONLY MEMORIES ( PROMS ) WITH A STORAGE CAPACITY OF 8 K BITS IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT , CONTAINED IN A HOUSING WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 17 BY 34 MM , WITH NOT MORE THAN 24 CONNECTING PINS , AND BEARING : **
* - AN IDENTIFICATION MARKING EITHER CONSISTING OF ONE OF THE FOLLOWING COMBINATIONS OF FIGURES OR FIGURES AND LETTERS OR INCLUDING ONE OF THOSE COMBINATIONS : **
*24 S 81**
*24 SA 81**
*2708-65**
*27 S 180**
*27 S 181**
*28 L 85**
*28 L 86**
*28 P 85**
*28 R 85**
*28 S 2708**
*28 S 85**
*28 S 86**
*28 SA 86**
*29630**
*29631**
*29632**
*29633**
*29634**
*29635*
*29636**
*29637**
*29650**
*29651**
*29652**
*29653**
*3628**
*5380**
*5381**
*54 LS 478**
*54 S 2708**
*54 S 454**
*54 S 455**
*54 S 478**
*54 S 479**
*6380**
*6381**
*7127**
*7128**
*7129**
*7130**
*7131**
*7132**
*74 LS 478**
*74 S 2708**
*74 S 454**
*74 S 455**
*74 S 478**
*74 S 479**
*7608**
*7680**
*7681**
*7684**
*7685**
*7686**
*7687**
*77 S 180**
*77 S 181**
*77 S 184**
*77 S 185**
*77 S 186**
*77 S 187**
*TBPS 81 M**
*82707**
*82708**
*82 LS 180**
*82 LS 181**
*82 S 180**
*82 S 181**
*82 S 182**
*82 S 183**
*82 S 184**
*82 S 185**
*82 S 2708**
*87 S 180**
*87 S 181**
*87 S 184**
*87 S 185**
*87 S 186**
*87 S 187**
*93450**
*93451**
*93460**
*93461**
*93465**
*93466**
*93 L 450**
*93 L 451**
*9460**
*OR**
* - OTHER IDENTIFICATION MARKINGS RELATING TO PROMS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*6*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 85.21 D II*SINGLE-CHIP MICROCOMPUTER , IN THE FORM OF A MONOLITHIC INTEGRATED CIRCUIT , CONSISTING OF AN ARITHMETICAL UNIT WITH A CAPACITY OF 4 BITS PLUS A READ ONLY MEMORY ( ROM ) WITH A CAPACITY OF NOT LESS THAN 18 K BITS AND NOT MORE THAN 65 K BITS AND A RANDOM ACCESS MEMORY ( RAM ) WITH A CAPACITY OF NOT LESS THAN 512 BITS AND NOT MORE THAN 4 K BITS , CONTAINED IN A HOUSING WHOSE EXTERIOR DIMENSIONS DO NOT EXCEED 16 BY 54 MM WITH NOT MORE THAN 40 CONNECTING PINS**
*THE PACKAGE BEARS : **
* - ONE OF THE FOLLOWING IDENTIFICATION MARKINGS : **
*CD 3200 TO 3299**
*TMC 0270 TO 0279**
*TMC 0500 TO 0599**
*TMC 0980 TO 0989**
*TMC 1500 TO 1599**
*TMC 1980 TO 1999**
*TP 0310 TO 0329**
*TP 0450 TO 0459**
*TP 0480 TO 0489**
*TP 0500 TO 0599**
*OR**
* - OTHER IDENTIFICATION MARKINGS RELATING TO MICROCOMPUTERS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*0*
EX 85.21 D II*AMPLIFIER IN THE FORM OF A MONOLITHIC INTEGRATED ANALOG CIRCUIT CONTAINED IN A HOUSING WHOSE DIMENSIONS DO NOT EXCEED 3,56 BY 3,56 BY 1,65 MM WITH NOT MORE THAN 10 CONNECTING PINS FOR USE IN PRODUCTS FALLING WITHIN SUBHEADING 90.19 B I ( A )**
*THE PACKAGE BEARS : **
* - ONE OF THE FOLLOWING IDENTIFICATION MARKINGS : **
*V 35**
*C 05**
*OR**
* - OTHER IDENTIFICATION MARKINGS RELATING TO AMPLIFIERS COMPLYING WITH THE ABOVEMENTIONED DESCRIPTION*0*
( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .
TABLE II
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 13.03 A V*EXTRACT OF DEWAXED PYRETHRUM*0*
EX 27.13 B II*SYNTHETIC PARAFFIN WAX HAVING A MOLECULAR WEIGHT OF NOT LESS THAN 460 AND NOT MORE THAN 1 560*0*
EX 28.04 B*HELIUM*0*
EX 28.04 C III*TELLURIUM*0*
EX 28.13 IJ*TELLURIUM DIOXIDE*0*
EX 28.21*CHROMIUM DIOXIDE*0*
EX 28.31 C*LITHIUM HYPOCHLORITE*0*
EX 28.38 C*POTASSIUM HYDROGENPEROXOMONOSULPHATE*0*
EX 28.40 B II*PENTACALCIUM HYDROXIDE TRIS(ORTHOPHOSPHATE ) FOR USE IN NON-FERROUS METALLURGY ( A)*0*
EX 28.42 A VI*LITHIUM CARBONATES NOT CORRESPONDING TO THE FOLLOWING SPECIFICATIONS : **
* - IN THE FORM OF WHITE POWDER**
* - CONTAINING 98,5 % OR MORE OF LI2CO3 AND : **
* - LESS THAN 2 PPM OF ARSENIC**
* - LESS THAN 200 PPM OF CALCIUM**
* - LESS THAN 200 PPM OF CHLORIDES**
* - LESS THAN 20 PPM OF IRON**
* - LESS THAN 150 PPM OF MAGNESIUM**
* - LESS THAN 20 PPM OF HEAVY METALS**
* - LESS THAN 300 PPM OF POTASSIUM**
* - LESS THAN 300 PPM OF SODIUM**
* - LESS THAN 200 PPM OF SULPHATES*0*
28.46 A I B ) *SODIUM BORATES , ANHYDROUS*0*
EX 28.47 F*CALCIUM WOLFRAMATE , FOR THE MANUFACTURE OF FERRO-ALLOYS OR DECA-AMMONIUM 41-OXODODECAWOLFRAMATE ( AMMONIUM PARATUNGSTATE ) ( A)*0*
EX 28.48 B III*HYDROTALCITE ( INN ) *0*
28.51 A*DEUTERIUM , DEUTERIUM OXIDE ( HEAVY WATER ) AND OTHER COMPOUNDS OF DEUTERIUM ; HYDROGEN AND COMPOUNDS THEREOF , ENRICHED IN DEUTERIUM ; MIXTURES AND SOLUTIONS CONTAINING THESE PRODUCTS ( EURATOM ) *0*
EX 28.57 A*SILANE ( SILICON HYDRIDE ) *0*
EX 28.57 B*MANGANESE NITRIDE CONTAINING NOT MORE THAN 8 % OF NITROGEN BY WEIGHT*0*
EX 29.01 C I*BETA-PINENE*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 29.01 D VII*VINYLTOLUENES*0*
EX 29.02 A I*CARBON TETRAFLUORIDE ( TETRAFLUOROMETHANE ) *0*
EX 29.02 A II B ) *1,2,3-TRICHLOROPROPENES*0*
EX 29.02 A III*VINYL BROMIDE*0*
EX 29.02 A III*1,2-DIBROMOETHANE*4*
EX 29.02 A V*BROMOCHLOROMETHANE*0*
EX 29.02 B*1,6,7,8,9,14,15,16,17,17,18,18 - DODECACHLOROPENTACYCLO(12.2.1.1 . 6,9.0 2,13.0 5,10 ) OCTADECA-7,15-DIENE , FOR USE IN THE MANUFACTURE OF POLYAMIDE ( A)*0*
EX 29.03 B II*NITROMETHANE*0*
EX 29.03 B II*1-NITROPROPANE*0*
EX 29.03 B II*2-NITROPROPANE*0*
EX 29.03 B II*NITROETHANE*0*
EX 29.03 C I*METHANESULPHONYL CHLORIDE*0*
EX 29.04 C I*BUTANE-1,3-DIOL*0*
EX 29.04 C V*2,2-BIS(BROMOMETHYL)PROPANEDIOL*0*
EX 29.06 A IV*2-TERT-BUTYL-4-ETHYLPHENOL*0*
EX 29.06 A IV*2-ISOPROPYLPHENOL*6*
EX 29.06 B V*4,4'-(2,3-DIMETHYLTETRAMETHYLENE ) DIPYROCATECHOL , NOT LESS THAN 98 % PURE*0*
EX 29.06 B V*6,6',6''-TRI-TERT-BUTYL-4,4',4 ''- ( 1-METHYLPROPAN-1-YL-3-YLIDENE ) TRI-M-CRESOL , WHETHER OR NOT CONTAINING TOLUENE OF CRYSTALLIZATION*0*
EX 29.06 B V*2,5-DI(TERT-PENTYL)HYDROQUINONE*0*
EX 29.08 A III C ) *BIS(PHENOXYPHENOXY)BENZENE , MIXED ISOMERS*0*
EX 29.08 A III C ) *SODIUM 4-(2-METHYLALLYLOXY ) BENZENESULPHONATE*0*
EX 29.09 B*1,2-EPOXYBUTANE*7*
EX 29.13 A I*5-METHYLHEXAN-2-ONE*0*
EX 29.13 A I*3,3-DIMETHYLBUTANONE*0*
EX 29.13 B I B ) *REFINED NATURAL BORNAN-2-ONE(CAMPHOR)*0*
EX 29.13 D I B ) *3-BETA-HYDROXY-16-ALPHA-METHYLPREGN - 5-EN-20-ONE*6*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 29.13 D I B ) *11-ALPHA,17-21-TRIHYDROXY-16 - BETA-METHYLPREGNA-1,4-DIENE-3,20-DIONE*0*
EX 29.13 E*4-METHOXY-4-METHYLPENTAN-2-ONE*0*
EX 29.13 F*1,4-NAPHTHOQUINONE*0*
EX 29.13 G II*1-CHLORO-3,3-DIMETHYLBUTANONE*0*
EX 29.14 A II C ) 4*16-ALPHA,17-ALPHA-EPOXY-20 - OXOPREGN-5-EN-3-BETA-YL ACETATE*6*
EX 29.14 A II C ) 4*11-ALPHA,17-ALPHA,21-TRIHYDROXY - 16-ALPHA-METHYL-5-ALPHA-PREGNANE-3,20-DIONE 21-ACETATE 11-(TOLUENE-4-SULPHONATE)*9*
EX 29.14 A II C ) 4*20-OXOPREGNA-5,16-DIEN-3-BETA-YL ACETATE*0*
EX 29.14 A XI*2,2'-ETHYLENEDIOXYDIETHYL BIS(2 - ETHYLBUTYRATE)*0*
EX 29.14 B IV B ) *BUTYL PERCHLOROCROTONATE*0*
29.15 A IV A ) *AZELAIC ACID AND SEBACIC ACID*0*
EX 29.15 C III*BENZENE-1,2,4-TRICARBOXYLIC ACID*0*
EX 29.15 C III*BENZENE-1,2,4,TRICARBOXYLIC ACID 1,2-ANHYDRIDE*0*
EX 29.15 C III*TETRACHLOROPHTHALIC ANHYDRIDE*0*
EX 29.15 C III*BENZYL 3-ISOBUTYRYLOXY-1-ISOPROPYL - 2,2-DIMETHYLPROPYL PHTHALATE*0*
EX 29.15 C III*TETRABROMOPHTHALIC ANHYDRIDE*0*
29.16 A III A ) *CRUDE CALCIUM TARTRATE*3,5*
EX 29.16 A VIII A ) *2,2-BIS(HYDROXYMETHYL)PROPIONIC ACID*0*
EX 29.16 B III*2-ETHYLHEXYL-4-HYDROXYBENZOATE*0*
EX 29.16 B VI*OCTADECYL-3-(3,5-DI-TERT-BUTYL-4 - HYDROXPHENYL)PROPIONATE*0*
EX 29.16 B VI*PENTAERYTHRITOL TETRAKIS(3-(3,5-DI-TERT - BUTYL-4-HYDROXYPHENYL)PROPIONATE)*0*
EX 29.16 D*DINOPROSTONE ( INN ) *0*
EX 29.22 A III*TERT-BUTYLAMINE*0*
EX 29.22 B II*N,N,N',N'-TETRABUTYLHEXAMETHYLENEDIAMINE*0*
EX 29.22 E II*1,8-NAPHTHYLENEDIAMINE*0*
EX 29.22 E II*M-PHENYLENEBIS(METHYLAMINE)*0*
EX 29.23 A II*DINOPROST(INN ) , TROMETAMOL SALT ( INN ) *0*
EX 29.23 A II*(+)-4-DIMETHYLAMINO-3-METHYL-1,2 - DIPHENYLBUTAN-2-OL*0*
EX 29.23 B II*DOBUTAMINE ( INN ) AND ITS SALTS*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 29.23 C*KETAMINE HYDROCHLORIDE ( INNM ) *0*
EX 29.23 D V*TRANEXAMIC ACID ( INN ) *0*
EX 29.23 D V*BETA-ALANINE*0*
EX 29.23 E*4-(2-HYDROXY-3-ISOPROPYLAMINOPROPOXY)-2,3,6 - TRIMETHYLPHENYL ACETATE*0*
EX 29.23 E*METHYLDOPA ( INN ) *0*
EX 29.23 E*DIETHYL 1,3-BENZODIOXOL-5-YLAMINOMETHYLENEMALONATE*0*
EX 29.23 E*6-ACETYL-1,3-BENZODIOXOL-5-YLAMMONIUM CHLORIDE*0*
EX 29.23 E*LEVODOPA ( INN ) *0*
EX 29.25 A II*N-ACETYL-DL-VALINE*0*
EX 29.25 A II*(3-METHACRYLAMIDOPROPYL)TRIMETHYLAMMONIUM CHLORIDE*0*
29.25 B II A ) *PHENOBARBITAL ( INN ) AND ITS SALTS*11*
EX 29.25 B II C ) *BARBITURIC ACID*0*
EX 29.25 B III B ) *2'-BENZOYL-4'-CHLORO-N - ( 2-HYDROXYPROPYL)GLYCINANILIDE*0*
EX 29.26 B II C ) *1,1,3,3-TETRAMETHYLGUANIDINE*0*
EX 29.27*(-)-N-(ALPHA-CYANO-4-HYDROXY-3-METHOXY - ALPHA-METHYLPHENETHYL)ACETAMIDE*0*
EX 29.27*2-(3-PHENOXYPHENYL)PROPIONONITRILE*0*
EX 29.29*20-HYDROXYIMINOPREGNA-5,16-DIEN-3-YL ACETATE*0*
EX 29.29*CARBIDOPA ( INN ) *0*
EX 29.29*ROBENIDINE HYDROCHLORIDE ( INNM ) *0*
EX 29.29*N,N-DIETHYLHYDROXYLAMINE*0*
EX 29.30*0,0-BIS(4-TERT-BUTYLPHENYL ) N-CYCLOHEXYLPHOSPHORAMIDOTHIOATE*0*
EX 29.30*METHYL ISOCYANATE*9*
EX 29.30*METHYLENEDICYCLOHEXYL DI-ISOCYANATE , MIXED ISOMERS*0*
EX 29.31 B*2-METHYL-2-(METHYLTHIO)PROPIONALDEHYDE OXIME*0*
EX 29.31 B*THIOPHENOL*0*
EX 29.31 B*TOLNAFTATE ( INN ) *0*
EX 29.31 B*2,2'-THIODIETHYL BIS(3-(3,5-DI-TERT-BUTYL-4-HYDROXYPHENYL)PROPIONATE)*0*
EX 29.34 C*CRYSTALLINE DIMETHYLTIN DICHLORIDE IN THE FORM OF POWDER , FOR THE PRODUCTION OF GOODS FALLING WITHIN CHAPTER 70 ( A)*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 29.34 C*2-CHLOROETHYLPHOSPHONIC ACID*7,6*
EX 29.34 C*2-DIPHENYLPHOSPHINOBENZOIC ACID*0*
EX 29.35 Q*2-ACETYL-1,4-BUTYROLACTONE*0*
EX 29.35 Q*2-BENZOTRIAZOL-2-YL-4-(1,1,3,3 - TETRAMETHYLBUTYL)PHENOL*0*
EX 29.35 Q*2-BENZOTRIAZOL-2-YL-P-CRESOL*0
EX 29.35 Q*2,6-DI-TERT-BUTYL-4-(4,6-BIS(OCTYLTHIO )- 1,3,5-TRIAZIN-2-YL-AMINO)PHENOL*0*
EX 29.35 Q AND EX 30.03 A II B ) *BUTORPHANOL ( INN ) AND ITS SALTS*0*
EX 29.35 Q*(-)-1-TERT-BUTYLAMINO-3-(4-MORPHOLINO - 1,2,5-THIADIAZOL-3-YLOXY)PROPAN-2-OL*0*
EX 29.35 Q*CLOTIAZEPAM ( INN ) *0*
EX 29.35 Q*1,4-DIAZABICYCLO(2.2.2)OCTANE ( TRIETHYLENEDIAMINE ) *0*
EX 29.35 Q*2,4-DI-TERT-BUTYL-6-(5-CHLOROBENZOTRIAZOL - 2-YL)PHENOL*0*
EX 29.35 Q*CARPIPRAMINE DIHYDROCHLORIDE ( INNM ) *0*
EX 29.35 Q*2,3-DIHYDRO-2,2-DIMETHYLBENZOFURAN-7-OL*0*
EX 29.35 Q*1-ETHYL-1,4-DIHYDRO-4-OXO(1,3)DIOXOLO(4,5-G ) CINNOLINE-3-CARBONITRILE*0*
EX 29.35 Q*INDOMETACIN ( INN ) *0*
EX 29.35 Q*DIPHEMANIL METILSULPHATE ( INN ) *0*
EX 29.35 Q*ORAZAMIDE ( INN ) *0*
EX 29.35 Q*(25R)-SPIROST-5-EN-3-BETA-OL(DIOSGENIN ) AND ITS ESTERS*0*
EX 29.35 Q*L-TRYPTOPHAN*0*
EX 29.35 Q*4-NITROBENZYL 7-AMINO-3-CHLORO-8-OXO-5 - THIA-1-AZABICYCLO(4.2.0)OCT-2-ENE-2-CARBOXYLATE AND ITS SALTS*0*
EX 29.35 Q*AZATADINE DIMALEATE ( INNM ) *0*
EX 29.35 Q*AMPROLIUM HYDROCHLORIDE ( INNM ) *0*
EX 29.35 Q*2-(4-PYRIDYL)ETHANESULPHONIC ACID*0*
EX 29.35 Q*PRIFINIUM BROMIDE ( INN ) *0*
EX 29.35 Q*GLUCUROLACTONE ( INN ) *0*
EX 29.35 Q*2-CHLORODIBENZ(B,F)(1,4)OXAZEPIN-11(10H)-ONE*0*
EX 29.35 Q*2,3,5,6-TETRACHLOROPYRIDINE*0*
EX 29.35 Q*DILTIAZEM HYDROCHLORIDE ( INNM ) *0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 29.35 Q*(6R,7R)-3-ACETOXYMETHYL-7-((R)-2-FORMYLOXY - 2-PHENYLACETAMIDO)-8-OXO-5-THIA-1-AZABICYCLO(4.2.0)OCT - 2-ENE-2-CARBOXYLIC ACID AND ITS SALTS AND ESTERS*0*
EX 29.35 Q AND EX 30.03 A II B ) *BUSPIRONE HYDROCHLORIDE ( INNM ) *0*
29.35 Q AND EX 30.03 A II B ) *ENCAINIDE HYDROCHLORIDE ( INNM ) *0*
EX 29.35 Q*5-BROMOPYRIMIDINE*0*
EX 29.36*QUINETHAZONE ( INN ) *0*
EX 29.36*SULFAGUANIDINE ( INN ) *0*
EX 29.36*SULFATHIAZOLE ( INN ) *0*
EX 29.36*4-CHLORO-5-SULPHAMOYLANTHRANIL-O-TOLUIDIDE*0*
EX 29.38 A*NICOTINIC ACID ( INN ) *0*
EX 29.38 B II*PANTHENOL ( INN ) *0*
EX 29.38 B III*POLIC ACID ( INN ) *0*
EX 29.38 B V*NICOTINAMIDE ( INN ) *0*
EX 29.39 C I*SERUM GONADOTROPHIN ( INN ) *0*
EX 29.39 E*CALCITONIN ( INN ) , SALMON-TYPE AND ITS SALTS*0*
EX 29.39 E*PRASTERONE ( INN ) *0*
EX 29.39 E*CALCITONIN ( INN ) , PORCINE*0*
EX 29.41 D*PURIFIED MIXTURE OF GLYCOSIDES FROM THE FERMENTATION OF STREPTOMYCES AVERMITILIS*0*
EX 29.42 CVII*PILOCARPINE HYDROCHLORIDE*0*
EX 29.42 C VII*PILOCARPINE NITRATE*0*
EX 29.42 C VII*(22R,25R)-TOMAT-5-ENIN-3-BETA-OL ( SOLASODINE ) *0*
EX 29.42 C VII*VINDESINE SULPHATE ( INNM ) *0*
EX 29.43 B*RIBOSE*0*
EX 29.43 B*SUCRALFATE ( INN ) *0*
EX 29.44 A*EPICILLIN ( INN ) *0*
EX 29.44 C AND EX 30.03 A II B ) *AMIKACIN ( INN ) AND ITS SALTS*0*
EX 29.44 C*AMPHOTERICIN B ( INN ) *0*
EX 29.44 C*MINOCYCLINE MONO-HYDROCHLORIDE DIHYDRATE ( INNM ) *0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 29.44 C*CLINDAMYCIN ( INN ) AND ITS SALTS AND ESTERS*0*
EX 29.44 C*SPECTINOMYCIN DIHYDROCHLORIDE PENTAHYDRATE ( INNM ) *0*
EX 29.44 C*GENTAMICIN ( INN ) AND ITS SALTS*0*
EX 29.44 C*NYSTATIN ( INN ) *0*
EX 29.44 C AND EX 30.03 A II B ) *BLEOMYCIN SULPHATE ( INNM ) *0*
EX 29.44 C*SISOMICIN SULPHATE ( INNM ) *0*
EX 29.44 C*SPECTINOMYCIN SULPHATE ( INNM ) *0*
EX 29.44 C*TOBRAMYCIN ( INN ) AND ITS SALTS*0*
EX 29.44 C*LINCOMYCIN ( INN ) AND ITS SALTS AND ESTERS , FOR THE MANUFACTURE OF PRODUCTS FALLING WITHIN HEADING NO 30.03 ( A)*0*
EX 29.44 C*MONENSIN ( INN ) AND ITS SALTS*0*
EX 29.44 C*CEFACLOR ( INN ) AND ITS HYDRATES , SALTS AND ESTERS*0*
EX 29.44 C*FUMAGILLIN DICYCLOHEXYLAMMONIUM ( INNM ) *0*
EX 29.44 C*NETILMICIN SULPHATE ( INNM ) *0*
EX 29.44 C*DIBEKACIN SULPHATE ( INNM ) *0*
EX 29.45*POTASSIUM TERT-BUTOXIDE*0*
EX 30.01 A*BOVINE LIVERS FOR ORGANOTHERAPEUTIC PURPOSES , DRIED*0*
EX 30.01 B II*EXTRACTS OF LIVER OF BOVINE ANIMALS*0*
EX 30.01 B II*EXTRACTS OF SUPRARENAL GLANDS*0*
EX 30.02 A*TETANUS IMMUNOGLOBULIN*0*
EX 30.02 A*ANTI-TETANUS IMMUNOPLASMA*0*
EX 30.02 A*GERMAN MEASLES IMMUNOPLASMA*0*
EX 30.02 A*MUMPS IMMUNOPLASMA*0*
EX 30.02 A*WHOOPING-COUGH IMMUNOPLASMA*0*
EX 30.02 A*RABIES IMMUNOPLASMA*0*
EX 30.03 A II B ) , B II B ) *HUMAN ALBUMIN , WHETHER OR NOT IN SOLUTION*0*
EX 30.03 A II B ) , B II B ) *HUMAN FIBRINOGEN*0*
EX 30.03 A II B ) , B II B ) *PRESERVED SERUM PREPARED ON A BASIS OF HUMAN BLOOD*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 30.03 A II B ) , B II B ) *ANTI-HAEMOPHILIC GLOBULIN AND ANTI-P(D)-GLOBULIN DERIVED FROM HUMAN BLOOD*0*
EX 30.03 A II B ) *CISPLATIN ( INN ) *0*
EX 30.03 A II B ) *MIXTURE OF OESTROGENS , OF EQUINE ORIGIN IN POWDER FORM*0*
EX 30.03 B II B ) *GAMMA-GLOBULIN , IN SOLUTION , DERIVED FROM HUMAN BLOOD*0*
EX 30.03 B II B ) *LYOPHILIZED GAMMA-GLOBULIN DERIVED FROM HUMAN BLOOD*0*
32.01 A I*TANNING EXTRACTS OF WATTLE ( MIMOSA ) *0*
EX 32.01 A IV*TANNING EXTRACTS DERIVED FROM GAMBIER AND MYROBOLAN FRUITS*0*
EX 32.01 A IV*TANNING EXTRACTS OF EUCALYPTUS*3,2*
EX 32.07 B*INORGANIC COLOURING MATTER PREPARATIONS MENTIONED IN NOTE 3 TO CHAPTER 32 , IN HOLLOW POLYURETHANE SPHERES HAVING A DIAMATER OF LESS THAN 200 MICROMETRES*0*
EX 32.08 D*GLASS IN THE FORM OF FLAKES OF A LENGTH NOT LESS THAN 0,1 MM AND NOT MORE THAN 3,5 MM OF A THICKNESS NOT LESS THAN TWO AND NOT MORE THAN FIVE MICROMETRES*0*
EX 32.09 A II AND EX 39.01 C V*POLYURETHANE OF 2,2'-(TERT-BUTYLIMINO)DIETHANOL AND 4,4'-METHYLENEDI(CYCLOHEXYL-ISOCYANATE , DISSOLVED IN N,N-DIAMETHYLACERAMIDE , WITH A COPOLYMER CONTENT OF NOT LESS THAN 48 % BY WEIGHT*0*
EX 32.09 A II AND EX 39.02 C XIV A ) *COPOLYMER OF P-CRESOL AND DIVINYLBENZENE , DISSOLVED IN N,N-DIMETHYLACETAMIDE , WITH A COPOLYMER CONTENT OF NOT LESS THAN 48 % BY WEIGHT*0*
EX 35.07*BROMELAINS ( INN ) *0*
EX 35.07*MIXTURE OF STREPTOKINASE ( INN ) AND STREPTODORNASE ( INN ) *0*
EX 35.07*PEROXIDASE*0*
EX 37.02 B*COLOUR NEGATIVE FILM OF A WIDTH NOT LESS THAN 75 MM AND NOT MORE THAN 105 MM AND OF A LENGTH OF 100 M OR MORE , FOR USE IN THE MANUFACTURE OF INSTANT PICTURE FILM PACKS ( A)*0*
EX 38.08 C*HYDROABIETYL ALCOHOL*0*
EX 38.19 G*CATALYSTS CONSISTING ESSENTIALLY OF DIPHOSPHORUS PENTAOXIDE ON AN INERT SUPPORT*0*
EX 38.19 G*CATALYSTS IN THE FORM OF SPHERICAL GRAINS WITH A DIAMETER OF NOT LESS THAN 1,4 MM AND NOT MORE THAN 1,8 MM CONSISTING OF BORON TRIFLUORIDE ON AN ALUMINIUM OXIDE SUPPORT*0*
EX 38.19 K*SINTERED MAGNESITE MIXED WITH SMALL QUANTITIES OF MINERAL OILS*0*
EX 38.19 U*LYOPHILIZED EXTRACT OF THE BLOOD CELLS OF THE CRAB LIMULUS POLYPHEMUS ( LYOPHILIZED LIMULUS AMEBOCYTE LYSATE ) *0*
EX 38.19 U*CALCINED BAUXITE ( REFACTORY GRADE ) *0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 38.19 U*DIOSGENIN CRUDE*0*
EX 38.19 U*4-(6-FLUORO-2-METHYLINDEN-3-YLMETHYL)PHENYL METHYL SULPHIDE DISSOLVED IN TOLUENE*0*
EX 38.19 U*MIXTURES OF X-BUTYL-4,4'-ISOPROPYLIDENEDIPHENOL AND X,X'-DIBUTYL-4,4'-ISOPROPYLIDENEDIPHENOL*0*
EX 38.19 U*MIXTURE OF NITROMETHANE AND 1,2-EPOXYBUTANE*4*
EX 38.19 U*REACTION PRODUCTS CONTAINING NOT LESS THAN 55 % BY WEIGHT OF 2-(2-P-CHLOROPHENYLBENZOXAZOL-5-YL ) PROPIONONITRILE*0*
EX 38.19 U*RESIDUES OF MANUFACTURE CONTAINING NOT LESS THAN 40 % BY WEIGHT OF 11-BETA,17,20,21-TETRAHYDROXY-6 - METHYLPREGNA-1,4-DIEN-3-ONE 21-ACETATE*0*
EX 38.19 U*INTERMEDIATE PRODUCTS FROM THE MANUFACTURE OF MONENSIN SALTS*0*
EX 38.19 U*GRAINS CONSISTING OF A MIXTURE OF DIALUMINIUM TRIOXIDE AND ZIRCONIUM DIOXIDE CONTAINING BY WEIGHT NOT LESS THAN 70 % AND NOT MORE THAN 78 % DIALUMINIUM TRIOXIDE AND NOT LESS THAN 19 % AND NOT MORE THAN 26 % ZIRCONIUM DIOXIDE*6,7*
EX 38.19 U*GRAINS CONSISTING OF A MIXTURE OF DIALUMINIUM TRIOXIDE AND ZIRCONIUM DIOXIDE CONTAINING BY WEIGHT NOT LESS THAN 54 % AND NOT MORE THAN 62 % DIALUMINIUM TRIOXIDE AND NOT LESS THAN 36 % AND NOT MORE THAN 44 % ZIRCONIUM DIOXIDE*6,7*
EX 38.19 U*N-(2-METHYL-2-NITROPROPYL)-4-NITROSOANILINE CONTAINING NOT LESS THAN 65 % BY WEIGHT OF AN INERT FILLER*0*
EX 38.19 U*TETRAMETHYLAMMONIUM HYDROXIDE DISSOLVED IN METHANOL*0*
EX 38.19 U*CHOLIC ACID AND 3-ALPHA , 12-ALPHA-DIHYDROXY-5-BETA-CHOLAN-24-OIC ACID ( DEOXYCHOLIC ACID ) , CRUDE*0*
EX 38.19 U*CRUDE BILE ACIDS*0*
EX 38.19 U*INTERMEDIATE PRODUCTS OF THE ANTIBIOTICS MANUFACTURING PROCESS OBTAINED FROM THE FERMENTATION OF STREPTOMYCES TENEBRARIUS , WHETHER OR NOT DRIED*0*
EX 39.01 A*COLESTIPOL HYDROCHLORIDE ( INNM ) *0*
EX 39.01 C II A ) *POLYCONDENSATION PRODUCTS OF FORMALDEHYDE AND A MIXTURE OF TOLUENE-2-SULPHONAMIDE AND TOLUENE-4-SULPHONAMIDE*0*
EX 39.01 C III A ) *FILM BASE , IN ROLLS , OF POLYETHYLENE TEREPHTHALATE , FOR CINEMATOGRAPHY OR PHOTOGRAPHY ( INCLUDING RADIOGRAPHY ) *8*
EX 39.01 C III B ) AND EX 39.03 B II B ) 2 , B III B ) 4 AA ) AND B IV B ) 4 AA ) *WASTE AND SCRAP OF PHOTOGRAPHIC ( INCLUDING CINEMATOGRAPHIC ) AND X-RAY FILM*0*
EX 39.01 C III B ) *WASTE AND SCRAP OF POLYESTER SHEETS COATED WITH TUNGSTEN COMPOUNDS*0*
EX 39.01 C III B ) *POLYESTER OF A MIXTURE OF ISOPHTHALIC ACID AND TEREPHTHALIC ACID WITH 4,4'-ISOPROPYLIDENEDIPHENOL*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 39.01 C V*POLYURETHANE POLYMERS IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( A ) TO CHAPTER 39 , BASED ON A MIXTURE OF 2-METHYL AND 4-METHYL-M-PHENYLENE DI-ISOCYANATES AND BRANCHED CHAIN TRIOLS WITH AN AVERAGE MOLECULAR WEIGHT OF NOT LESS THAN 6 000 , AND CONTAINING TERMINAL EPOXY GROUPS*10*
EX 39.01 C VII*POLYIMIDE SHEET AND STRIP , WHETHER OR NOT IN ROLLS*0*
EX 39.01 C VII*POLYETHYLENE OXIDE HAVING A MOLECULAR WEIGHT OF NOT LESS THAN 4 000 000*8*
EX 39.01 C VII*POLY(OXY(2,6-DIBROMO-1,4-PHENYLENE )) FOR USE IN THE MANUFACTURE OF POLYAMIDE ( A)*0*
EX 39.01 C VII*POLY(OXY(2,6-DIBROMO-1,4-PHENYLENE )) FOR USE IN THE MANUFACTURE OF POLYPROPYLENE ( A)*0*
EX 39.01 C VII*POLY(OXY-1,4-PHENYLENESULPHONYL-1,4 - PHENYLENEOXY-1,4-PHENYLENEISOPROPYLIDENE-1,4-PHENYLENE ) , IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( B ) TO CHAPTER 39*0*
EX 39.02 C II*MICROPOROUS POLYTETRAFLUOROETHYLENE FILM , NOT LESS THAN 30 CM IN WIDTH AND WEIGHING NOT MORE THAN 22,4 G/M2 WHETHER OR NOT IN ROLLS*0*
EX 39.02 C II*MICROPOROUS POLYTETRAFLUOROETHYLENE FILM COATED ON ONE SIDE WITH A POLYMER PERMEABLE TO WATER VAPOUR , NOT LESS THAN 30 CM IN WIDTH AND WEIGHING NOT MORE THAN 50 G/M2 , WHETHER OR NOT IN ROLLS*0*
EX 39.02 C III*POLYSULPHOHALOETHYLENES IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( A ) AND ( B ) TO CHAPTER 39*4*
EX 39.02 C VI A ) , B ) *COPOLYMERS SOLELY OF ALLYL ALCOHOL WITH STYRENE , WHICH HAVE AN ACETYL VALUE OF NOT LESS THAN 175*0*
EX 39.02 C VI A ) *COPOLYMER OF MALEIC ANHYDRIDE AND STYRENE , WHETHER OR NOT CONTAINING A STYRENEBUTADIENE BLOCK COPOLYMER IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( B ) TO CHAPTER 39*0*
EX 39.02 C VI A ) *AN A-B-A BLOCK COPOLYMER OF POLYSTYRENE ETHYLENE-BUTYLENE COPOLYMER AND POLYSTYRENE CONTAINING NOT MORE THAN 35 % BY WEIGHT OF STYRENE , IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( B ) TO CHAPTER 39*0*
EX 39.02 C VII B ) *POLYVINYL CHLORIDE SHEETING , WHETHER OR NOT IN ROLLS , OF A THICKNESS LESS THAN 1 MM AND COATED WITH AN ADHESIVE IN WHICH ARE EMBEDDED HOLLOW GLASS BALLS HAVING A DIAMETER OF NOT LESS THAN 50 AND NOT MORE THAN 100 MICROMETRES*0*
EX 39.02 C VIII*COPOLYMERS OF VINYLIDENE CHLORIDE WITH VINYL CHLORIDE , CONTAINING NOT LESS THAN 79,5 % BY WEIGHT OF VINYLIDENE CHLORIDE , IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( A ) AND ( B ) TO CHAPTER 39 , FOR THE MANUFACTURE OF FIBRES , MONOFIL OR STRIP ( A)*0*
EX 39.02 C XI*POLY(VINYL FORMAL ) , IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( B ) TO CHAPTER 39 , HAVING A MOLECULAR WEIGHT NOT LESS THAN 10 000 AND NOT MORE THAN 40 000 AND CONTAINING BY WEIGHT : **
* - NOT LESS THAN 9,5 % AND NOT MORE THAN 13 % OF THE ACETYL GROUPS , EXPRESSED AS VINYL ACETATE**
* - NOT LESS THAN 5 % AND NOT MORE THAN 6,5 % OF THE HYDROXY GROUPS , EXPRESSED AS VINYL ALCOHOL*0*
EX 39.02 C XII*POLY(2-DIETHYLAMINOETHYL METHACRYLATE ) DISSOLVED IN N,N-DIMETHYLACETAMIDE , WITH A POLYMER CONTENT OF NOT LESS THAN 55 % BY WEIGHT*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 39.02 C XII*COPOLYMER OF 2-DI-ISOPROPYLAMINOETHYL METHACRYLATE AND DECYL METHACRYLATE DISSOLVED IN N,N-DIMETHYLACETAMIDE , WITH A COPOLYMER CONTENT OF NOT LESS THAN 55 % BY WEIGHT*0*
EX 39.02 C XII*REFLECTING POLYACRYLIC SHEETING , WHETHER OR NOT IN ROLLS*0*
EX 39.02 C XII*COPOLYMERIZATION PRODUCTS OF ACRYLIC AND METHACRYLIC ESTERS IN THE FORM OF FILM OF A THICKNESS NOT LESS THAN 50 AND NOT MORE THAN 150 MICROMETRES , WHETHER OR NOT IN ROLLS*0*
EX 39.02 C XII*COPOLYMER OF ACRYLIC ACID AND 2-ETHYLHOXYL ACRYLATE CONTAINING NOT LESS THAN 10 % AND NOT MORE THAN 11 % BY WEIGHT OF 2-ETHYLHOXYL ACRYLATE*0*
EX 39.02 C XIV A ) *COPOLYMERS OF VINYLIDENE CHLORIDE AND ACRYLONITRILE IN THE FORM OF EXPANDABLE BEADS OF A DIAMETER NOT LESS THAN FOUR AND NOT MORE THAN 20 MICROMETRES*0*
EX 39.02 C XIV A ) *COPOLYMERS OF VINYL CHLORIDE WITH VINYL ACETATE AND VINYL ALCOHOL CONTAINING BY WEIGHT NOT LESS THAN 89 % AND NOT MORE THAN 92 % OF VINYL CHLORIDE , NOT LESS THAN 2 % AND NOT MORE THAN 6 % OF VINYL ACETATE AND NOT LESS THAN 4 % AND NOT MORE THAN 8 % OF VINYL ALCOHOL , IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( A ) AND ( B ) TO CHAPTER 39*0*
EX 39.02 C XIV A ) *FLUORINATED ETHYLENE PROPYLENE COPOLYMERS , FOR THE MANUFACTURE OF FLAT ( RIBBON ) CABLE , CONTAINING NOT LESS THAN 60 CORES ( A)*0*
EX 39.02 C XIV A ) *POLY(1-ETHYLETHYLENE ) ( POLYBUTENE-1 ) IN ONE OF THE FORMS MENTIONED IN NOTE 3 ( B ) TO CHAPTER 39*0*
EX 39.02 C XIV B ) *POLYVINYL FLUORIDE SHEET , WHETHER OR NOT IN ROLLS*0*
EX 39.02 C XIV B ) *REFLECTING SHEETING OF AN ACRYLIC POLYMER MODIFIED BY MELAMINE-FORMALDEHYDE , WHETHER OR NOT IN ROLLS*0*
EX 39.02 C XIV B ) *POLYVINYLIDENE FLUORIDE FILM , WHETHER OR NOT IN ROLLS*0*
39.03 B V A ) 1*ETHYLCELLULOSE , NOT PLASTICIZED*4*
EX 39.03 B V A ) 2*ETHYLHYDROXYETHYLCELLULOSE , INSOLUBLE IN WATER*4*
EX 39.03 B V A ) 2*HYDROXYPROPYLCELLULOSE*0*
EX 39.06 B*O-(2-HYDROXYETHYL)AMYLOPECTIN HYDROLYSATE*0*
EX 39.07 B V D ) *PERFORATED POLYETHYLENE FILM OF A WIDTH OF NOT LESS THAN 4,5 CM AND NOT MORE THAN 5,5 CM AND HAVING A MOLECULAR WEIGHT OF NOT LESS THAN 4 000 000 IN ROLLS FOR USE AS CONVEYOR BELTS IN MACHINES FOR MANUFACTURING CIGARS ( A)*0*
41.02 B*BOVINE CATTLE LEATHER ( INCLUDING BUFFALO LEATHER ) NOT FURTHER PREPARED THAN CHROMETANNED , IN THE WET-BLUE STATE*0*
EX 41.02 C*LEATHER OF EAST INDIA KIP , WHOLE , WHETHER OR NOT THE HEADS AND LEGS HAVE BEEN REMOVED , EACH WEIGHING MORE THAN 4,5 KG NET AND NOT MORE THAN 8 KG , NOT FURTHER PREPARED THAN VEGETABLE TANNED , WHETHER OR NOT HAVING UNDERGONE FURTHER PRESERVATIVE TREATMENT WITH OIL , BUT OBVIOUSLY UNSUITABLE FOR IMMEDIATE USE IN THE MANUFACTURE OF LEATHER ARTICLES*0*
41.03 B I*SHEEP AND LAMBSKIN LEATHER , EXCEPT LEATHER FALLING WITHIN HEADING NO 41.06 OR 41.08 , OTHER , NOT FURTHER PREPARED THAN TANNED*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
41.04 B I*GOAT AND KID SKIN LEATHER , EXCEPT LEATHER FALLING WITHIN HEADING NO 41.06 OR 41.08 , OTHER , NOT FURTHER PREPARED THAN TANNED*0*
41.05 B I*OTHER KINDS OF LEATHER , EXCEPT LEATHER FALLING WITHIN HEADING NO 41.06 OR 41.08 , OTHER , NOT FURTHER PREPARED THAN TANNED*0*
EX 44.22 B*USED CASKS AND BARRELS OF OAK , WHETHER ASSEMBLED OR NOT ; THEIR STAVES AND HEADS*0*
EX 44.28 D II*SHINGLES FOR ROOFS AND WALLS OF CONIFEROUS WOOD*0*
45.01*NATURAL CORK , UNWORKED , CRUSHED , GRANULATED OR GROUND ; WASTE CORK*0*
45.02*NATURAL CORK IN BLOCKS , PLATES , SHEETS OR STRIPS ( INCLUDING CUBES OR SQUARE SLABS , CUT TO SIZE FOR CORKS OR STOPPERS ) *4*
EX 48.07 D*KRAFT PAPER WITH LATEX ADDITION TO THE STOCK , COATED ON ONE SIDE WITH POLYBUTADIENE-STYRENE WEIGHING NOT LESS THAN 104 G AND NOT MORE THAN 130 G/M2 , FOR THE MANUFACTURE OF ALL-IN-ONE DISPOSABLE NAPPIES ( A)*6*
EX 49.11 B*MICROCOPIES ON AN OPAQUE BASE FOR DATA BANKS AND LIBRARIES ( A)*0*
EX 49.11 B*ARTISTS' SCREEN PRINTS ( COMMONLY DESCRIBED AS SERIGRAPHS ) , SIGNED BY THE ARTIST AND NUMBERED FROM 1 TO 200*0*
EX 51.01 A*YARN OF POLYTETRAFLUORETHYLENE*0*
EX 51.01 A*YARN OF POLYVINYL ALCOHOL , SOLUBLE IN WATER AT A TEMPERATURE OF 50 * C FOR USE IN THE MANUFACTURE OF WEFTLESS " FELTS " FOR PAPERMAKING MACHINES ( A)*0*
EX 51.01 A*YARN , MULTIPLE , OF POLYAMIDE , COATED , IMPREGNATED OR COVERED WITH A PHENOLIC RESIN*0*
EX 51.01 A*YARN OF SYNTHETIC TEXTILE FIBRES OF AROMATIC POLYAMIDES OBTAINED BY POLYCONDENSATION OF M-PHENYLENEDIAMINE AND ISOPHTHALIC ACID*0*
EX 51.02 A I*MONOFIL OF POLYTETRAFLUOROETHYLENE*0*
EX 51.02 A II*POLYIMIDE STRIP , WHETHER OR NOT IN ROLLS*0*
EX 51.02 A II*STRIP OF POLYTETRAFLUOROETHYLENE , WHETHER OR NOT IN ROLLS WITH AN EXTENSION AT BREAK NOT EXCEEDING 25 % *0*
EX 51.04 A IV*WOVEN FABRICS OF POLYVINYL ALCOHOL FIBRES FOR MACHINE EMBROIDERY*0*
EX 54.03 B I A ) *UNBLEACHED LINEN YARN ( EXCLUDING YARN OF FLAX TOW ) , MEASURING PER KG 30 000 M OR LESS , FOR THE MANUFACTURE OF MULTIPLE OR CABLED YARNS FOT THE FOOTWEAR INDUSTRY OR FOR WHIPPING CABLES ( A)*0*
EX 56.01 A*TEXTILE FIBRES OF POLYTETRAFLUOROETHYLENE*0*
EX 56.01 A*TEXTILE FIBRES OF AROMATIC POLYAMIDES OBTAINED BY POLYCONDENSATION OF M-PHENYLENEDIAMINE AND ISOPHTHALIC ACID*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
EX 58.01 B*CARPETS , CARPETING AND RUGS , OF SILK OR OF WASTE SILK OTHER THAN NOIL , OF WHICH THE PILE CONTAINS NOT LESS THAN 85 % BY WEIGHT OF SILK OR WASTE SILK OTHER THAN NOIL ( B)*20 WITH A MAXIMUM DUTY OF 4 ECU PER M2*
EX 59.03*BONDED-FIBRE FABRICS AND SIMILAR BONDED YARN FABRICS OF AROMATIC POLYAMIDE MAN-MADE FIBRES OBTAINED BY POLYCONDENSATION OF M-PHENYLENEDIAMINE AND ISOPHTHALIC ACID*0*
EX 59.03*BONDED-FIBRE FABRICS , WITH A THICKNESS OF NOT MORE THAN 300 MICROMETRES , OF SPUNBONDED POLYETHYLENE FIBRES , WITH A WEIGHT NOT EXCEEDING 115 G/M2 , WHETHER OR NOT IN ROLLS*0*
EX 59.04*COIR YARN , FOR THE MANUFACTURE OF CARPETS , CARPETING AND RUGS , MATS AND THE LIKE ( A)*0*
EX 59.08*KNITTED OR WOVEN FABRIC COATED OR COVERED ON ONE SIDE WITH ARTIFICIAL PLASTIC MATERIAL IN WHICH ARE EMBEDDED GLASS MICROSPHERES*0*
EX 59.12*COTTON FABRIC COATED WITH ADHESIVE IN WHICH ARE EMBEDDED GLASS BALLS THE DIAMETERS OF WHICH RANGE FROM 45 TO 75 MICROMETRES , WEIGHING NOT LESS THAN 300 G/M2 AND NOT MORE THAN 550 G/M2*0*
EX 59.17 D*YARN AND STRIP OF IMPREGNATED POLYTETRAFLUOROETHYLENE , WHETHER OR NOT OILED OR GRAPHITED*0*
62.03 A I*SACKS AND BAGS , OF A KIND USED FOR THE PACKING OF GOODS , USED , OF JUTE OR OF OTHER TEXTILE BAST FIBRES OF HEADING NO 57.03*0*
62.03 B I A ) *SACKS AND BAGS OF THE KIND USED FOR THE PACKING OF GOODS , USED , OF FLAX OR OF SISAL*0*
EX 68.02 B*ARTIFICIALLY COLOURED GRANULES AND CHIPPINGS*0*
EX 69.09 B*CATALYST SUPPORTS , CONSISTING OF POROUS CORDIERITE CERAMIC PIECES OF ROUGHLY CIRCULAR OR OVAL CROSS-SECTION WITH PARALLEL SIDES , HAVING AN OVERALL VOLUME OF NOT LESS THAN 240 ML AND NOT MORE THAN 11 100 ML , AND HAVING A MINIMUM DIMENSION OF NOT LESS THAN 70 MM AND A MAXIMUM DIMENSION OF NOT MORE THAN 480 MM , HAVING NOT LESS THAN 28 CONTINUOUS CHANNELS PER 100 MM2 RUNNING PARALLEL TO THE MAIN AXIS OF SYMMETRY , THE TOTAL CHANNEL CROSS-SECTION AREA BEING NOT LESS THAN 50 % AND NOT MORE THAN 80 % OF THE WHOLE CROSS-SECTION AREA*0*
EX 70.19 A IV B ) *GLASS BEADS OF A DIAMETER OF LESS THAN 0,1 MM AND WITH A REFRACTIVE INDEX OF 2,26*0*
EX 70.20 A*MATS OF NON-TEXTILE GLASS FIBRES OF A WEIGHT PER SQUARE METRE OF A NOT MORE THAN 100 G AND A FIBRE DIAMETER OF NOT MORE THAN SEVEN MICROMETRES*0*
EX 70.20 B*GLASS-FIBRE YARNS , WITH A FILAMENT DIAMETER OF NOT MORE THAN FOUR MICROMETRES , FOR THE MANUFACTURE OF CARPETS ( A)*0*
EX 70.20 B*YARNS OF 33 TEX OR A MULTIPLE THEREOF OBTAINED FROM CONTINUOUS SPUN GLASS FILAMENTS HAVING A DIAMETER OF NOT LESS THAN 2,5 AND NOT MORE THAN 5,1 MICROMETRES OTHER THAN THOSE TREATED SO AS TO IMPROVE THEIR ADHESION TO ELASTOMERS*0*
EX 74.05 B*NON-RIGID SHEETS AND PLATES OF POLYTETRAFLUOROETHYLENE , WITH ALUMINIUM OXIDE AS A FILLER OR REINFORCED WITH GLASS-FIBRE FABRIC , LAMINATED ON BOTH SIDES WITH COPPER FOIL*0*
EX 75.04 A*TUBES OF NICKEL , NOT ALLOYED , OF A PURITY NOT LESS THAN 99 % , NOT DEVIATING FROM STRAIGHTNESS LENGTHWISE BY MORE THAN 1 MM PER 150 CM OF LENGTH , AND WITH AN OUTSIDE DIAMETER EITHER : **
* - NOT LESS THAN 213,36 MM AND NOT MORE THAN 214 MM , OR**
* - NOT LESS THAN 209,95 MM AND NOT MORE THAN 210,59 MM , OR**
* - NOT LESS THAN 168,28 MM AND NOT MORE THAN 168,78 MM*0*
CCT HEADING NO*DESCRIPTION*RATE OF AUTONOMOUS DUTY ( % ) *
76.01 B I B ) *WASTE OF ALUMINIUM , OTHER ( INCLUDING FACTORY REJECTS ) *0*
EX 76.03*ALUMINIUM ALLOY STRIP IN COILS , CONTAINING NOT LESS THAN 18 % BY WEIGHT AND NOT MORE THAN 23 % BY WEIGHT OF TIN AND NOT LESS THAN 0,7 % BY WEIGHT AND NOT MORE THAN 1,5 % BY WEIGHT OF COPPER AS THE MAJOR ALLOYING ELEMENTS AND HAVING A WIDTH OF NOT LESS THAN 75 AND NOT MORE THAN 230 MM AND A THICKNESS OF NOT LESS THAN 3 AND NOT MORE THAN 6,5 MM*0*
EX 81.03 B*WIRE OF UNALLOYED TANTALUM , OF A DIAMETER NOT LESS THAN 0,2 MM AND NOT MORE THAN 0,5 MM , FOR THE MANUFACTURE OF CAPACITORS ( A)*0*
EX 81.04 D I B ) *CHROMIUM , IN THE FORM OF CATHODE CHIPS , PELLETS OR BRIQUETTES , WHICH CONTAINS NOT MORE THAN 0,10 % BY WEIGHT OF TOTAL OXYGEN , NOT MORE THAN 0,15 % BY WEIGHT OF TOTAL ALUMINIUM AND NOT MORE THAN 0,001 % BY WEIGHT OF ALUMINIUM COMPOUNDS INSOLUBLE IN BOILING 5N HYDROCHLORIC ACID AND IN BOILING FUMING PERCHLORIC ACID , AND EVALUATED AS ALUMINIUM , FOR THE PRODUCTION OF ALLOY FOR THE MANUFACTURE OF THE FOLLOWING PARTS OF GAS TURBINES AND JET ENGINES ( A )**
* - BLADES , FIXED OR MOVABLE , INCLUDING THEIR RINGS**
* - VANES**
* - NOZZLES*0*
EX 81.04 G I*ELECTROLYTIC MANGANESE OF A PURITY OF AT LEAST 99,7 % , FOR THE CHEMICAL INDUSTRY ( A)*0*
EX 81.04 K I*WASTE AND SCRAP TITANIUM*0*
EX 81.04 K I*TITANIUM SPONGE*0*
EX 81.04 M*WASTE AND SCRAP OF URANIUM DEPLETED IN U 235*0*
EX 84.31 A*SUCTION ROLL SHELLS , NOT DRILLED , BEING ALLOY STEEL TUBES WITH A LENGTH OF NOT LESS THAN 5 207 MM AND AN OUTSIDE DIAMETER OF NOT LESS THAN 754 MM FOR USE IN MACHINERY FOR MAKING PAPER OR PAPERBOARD ( A)*0*
EX 84.51 A*TYPEWRITERS WITH BRAILLE CHARACTERS*0*
EX 84.51 A*ELECTRONIC POCKET COMMUNICATORS FOR HANDICAPPED PERSONS WHICH , BY MEANS OF PUSH BUTTONS AND PRINTING THERMIC HEAD , PRINT AND ISSUE TEXT ON TAPE*0*
EX 84.55 C*PARTS AND ACCESSORIES OF ELECTRONIC POCKET COMMUNICATORS FOR HANDICAPPED PERSONS WHICH , BY MEANS OF PUSH BUTTONS AND PRINTING THERMIC HEAD , PRINT AND ISSUE TEXT ON TAPE*0*
EX 84.59 B*INTEGRALLY FORGED , ROUGH-TURNED COMPONENTS WITH UNIT WEIGHTS OF MORE THAN 150 TONNES , FOR REACTOR PRESSURE VESSELS*0*
EX 84.63 D*FORGED AND ROUGHLY SHAPED GENERATOR AND TURBINE SHAFTS OF A WEIGHT EXCEEDING 180 TONNES*0*
EX 90.01 B*MATERIAL CONSISTING OF A POLARIZING FILM , SUPPORTED ON ONE OR BOTH SIDES BY TRANSPARENT MATERIAL*0*
EX 90.19 A III*VASCULAR PROSTHESES*0*
EX 90.19 B II*READING APPLIANCES FOR THE BLIND , IN WHICH A MINIATURE CAMERA USING PHOTOTRANSISTORS TRANSMITS LETTERS ONTO A SCANNING BOARD WITH PIEZO-ELECTRIC PENCILS , AND ITS PARTS AND ACCESSORIES*0*
( A ) CONTROL OF THE USE FOR THIS SPECIAL PURPOSE SHALL BE CARRIED OUT PURSUANT TO THE RELEVANT COMMUNITY PROVISIONS .
( B ) THE ADDITIONAL NOTE TO CHAPTER 58 SHALL APPLY HERE .