In the chemical and allied sectors

Avis juridique important

Council Regulation (EEC) No 1627/92 of 5 June 1992 temporarily suspending the autonomous Common Customs Tariff duty on certain industrial products (in the chemical and allied sectors) Official Journal L 178 , 01/07/1992 P. 0111 - 0138

COUNCIL REGULATION (EEC) No 1627/92 of 5 June 1992 temporarily suspending the autonomous Common Customs Tariff duty on certain industrial products (in the chemical and allied sectors)

THE COUNCIL OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community, and in particular Article 28 thereof,

Having regard to the proposal from the Commission,

Whereas production of the products referred to in this Regulation is at present inadequate or non-existent within the Community and producers are thus unable to meet the needs of user industries in the Community;

Whereas it is in the Community's interest in certain cases to suspend the autonomous Common Customs Tariff duties only partially, particularly because of the existence of Community production, and in other cases to suspend them completely;

Whereas, taking account of the difficulties involved in accurately assessing the development of the economic situation in the sector concerned in the near future, these suspension measures should be taken only temporarily, by fixing their period of validity by reference to the interests of Community production,

HAS ADOPTED THIS REGULATION:

Article1¶

The autonomous Common Customs Tariff duties for the products listed in the tables appearing in the Annexes shall be suspended at the level indicated in respect of each of them.

These suspensions shall apply:

- from 1 July to 31 December 1992 for the products listed in the table appearing in Table I,

- from 1 July 1992 to 30 June 1993 for the products listed in the table appearing in Table II.

Article2¶

This Regulation shall enter into force on 1 July 1992.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 5 June 1992.

For the Council The President Joaquim FERREIRA DO AMARAL

ANNEX

TABLE I ex 2712 90 9020Blend of 1-alkenes containing by weight 80 % or more of 1-alkenes of a chain-length of 24 carbon atoms or more but not exceeding 28 carbon atoms0ex 2903 59 0020Hexachlorocyclopentadiene0ex 2904 20 90402-Nitropropane0ex 2905 16 9010Octan-2-ol0ex 2914 50 00104-Methoxy-4-methylpentan-2-one0ex 2914 69 0040Idebenone (INN)3,7ex 2916 20 0010Methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate0ex 2916 39 00203,5-Dichlorobenzoyl chloride0ex 2922 19 0050Tulobuterol hydrochloride (INNM)0ex 2925 19 9010N-Phenylmaleimide0ex 2929 10 0040trans-(Cyclohex-1,4-ylene diisocyanate), for the manufacture of thermoplastic polyurethane elastomers (a)0ex 2931 00 9040Chlorodiphenylphosphine0ex 2931 00 9050Bis(2-chloroethyl) 2-chloroethylphosphonate0ex 2933 39 80134,4& prime;-Bis(hydroxyiminomethyl)-1,1& prime;-(oxydimethylene)dipyridinium dichloride0ex 2933 39 8019Obidoxime chloride (INN)0ex 2933 39 8022Nicorandil (INN)4ex 2933 39 80235-Methyl-2-pyridylamine0ex 2933 39 8024Fluroxypyr (ISO), methyl ester4ex 2935 00 0070Methyl 2-[4-methoxy-6-methyl-1,3,5-triazin-2-yl(methyl)carbamoylsulphamoyl]

benzoate (Tribenuron-methyl)3,3ex 2935 00 0075Methyl 2-(4-methoxy-6-methyl-1,3,5-triazin-2-ylcarbamoylsulphamoyl)benzoate (Metsulfuron-methyl)3,3ex 2935 00 0080Methyl 3-(4-methoxy-6-methyl-1,3,5-triazin-2-ylcarbamoylsulphamoyl)thiophenecarboxyl-

ate (Thifensulfuron-methyl)3,3ex 2935 00 0085Chlorsulfuron (ISO)3,3ex 2937 10 1010Serum gonadotrophin (INN)0ex 2941 30 0010Minocycline (INN) and its salts0ex 2941 90 0003Amphotericin B (INN)0ex 2941 90 0018Latamoxef (INN) and its salts and esters0ex 2941 90 0025Sisomicin sulphate (INNM)0ex 2941 90 0041Pirarubicin (INN)0ex 2941 90 0042Rokitamycin (INN)2,7ex 3003 39 0010Mixture of oestrogens of equine origin, in the form of powder0ex 3004 90 9910Carboplatin (INN) mixed with mannitol0ex 3207 40 9010Glass, in the form of flakes of a length of 0.1 mm or more but not exceeding 3,5 mm and of a thickness of 2 micrometres or more but not exceeding 5 micrometres0ex 3208 90 10

ex 3911 90 9020

86 Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 48 % or more of polymer0ex 3402 90 9010Crystalline powder obtained by the reaction of trisodium phosphate with a mixture of sodium hypochlorite and sodium chloride ('chlorinated trisodium phosphate'), containing by weight:

-3,5 % or more of available chlorine, measured iodometrically

and

-17,0 % or more of phosphorus evaluated as P2O50ex 3815 11 0010Catalyst, in the form of granules, consisting of a mixture of oxides on an aluminium oxide support and containing by weight:

-12 % or more but not more than 20 % of nickel,

-5 % or more but not more than 10 % of copper

and

-0,5 % or more but not more than 1,5 % of manganese,

of a pore volume of 0,25 cm3/g or more but not exceeding 0,95 cm3/g and of an apparent specific gravity of 0,5 or more but not exceeding 1,250ex 3815 90 0055Catalyst, in the form of rodlets of a length of 5 mm or more but not exceeding 8 mm, consisting of a mixture of oxides of iron, molybdenum and bismuth, for use in the manufacture of acrylic acid (a)0ex 3815 90 0085Catalyst, consisting of a mixture of titanium, magnesium and aluminium compounds, in the form of a suspension in hexane, containing by weight:

-3 % or more but not more than 6 % of titanium,

-1,5 % or more but not more than 3 % of magnesium

and

-0,3 % or more but not more than 0,5 % of aluminium,

for use in the manufacture of polyethylene of a specific gravity of 0,930 or more (a)0ex 3818 00 1010Doped silicon wafers, of Czochralski technology, of a diameter of 70 mm or more, unpolished and containing 5×1017 or more of oxygen atoms per cm30ex 3823 90 9109Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora inyoensis, whether or not dried0ex 3823 90 9814Reaction products of dibutyl dihydrogendiphosphate and 1,2-epoxypropane, for the manufacture of non-rigid polyurethane (a)0ex 3901 20 0010Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985, for the manufacture of typewriter ribbon or similar ribbon (a)0ex 3901 90 0092Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid4ex 3901 90 00

ex 3902 90 0094

91 A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 390ex 3903 90 0020Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6 (b) to Chapter 390ex 3905 90 0096Copolymer of vinyl alcohol with ethylene (EVOH):

-containing 38 mole % or more but not more than 46 mole % of ethylene

and

-of a melting-point of 160 °C or more but not exceeding 185 °C,

for the manufacture of biodegradable products containing by weight 40 % or more of starch (a)0ex 3906 90 0015Copolymer, entirely of methyl methacrylate with styrene and maleic anhydride, containing by weight:

-36 % or more but not more than 45 % of methyl methacrylate,

-not more than 36 % of styrene

and

-20 % or more but not more than 28 % of maleic anhydride,

in one of the forms mentioned in note 6 (b) to Chapter 390ex 3907 20 9050Reaction product of poly(oxyalkylene) polyol with a polycarboxylic acid and epsilon-caprolactam0ex 3907 20 9060a-4-Hydroxybutyl-o-hydroxypoly(oxytetramethylene), containing less than 1 mg/kg of halogen and of metal, and of a colour not exceeding 20 units on the Hazen scale0ex 3911 90 1010Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-

1,4-phenylene), in one of the forms mentioned in note 6 (b) to Chapter 393,5ex 3911 90 9081Polymerization product of a (polybutadiene)polyol with two lactams N,N& prime;-linked by the bivalent acyl radical of a dicarboxylic acid0ex 3919 90 31

ex 3920 62 00

ex 3921 90 19 30

05

60 Polyethylene terephthalate film, dyed in the mass, of a thickness not exceeding 25 micrometres and metallized on one side6ex 3919 90 31

ex 3920 62 00

ex 3920 63 00

ex 3920 69 0040

13

30

30 Reflecting polyester sheeting embossed in a regular pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (a)0ex 3920 10 11

ex 3921 90 6093

30 Laminated plastic sheet or strip, either:

-of a width of 190 mm or more, consisting of a layer of biaxially-orientated polyamide film, coated, on one side, with polyvinylidene chloride and, on the other side, with a layer of polyethylene film,

or

-of a width not exceeding 15 mm, consisting of a layer of biaxially-orientated polyamide film and two layers of polyethylene film0ex 3920 10 11

ex 3920 10 19

ex 3921 90 6094

93

26 Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate0ex 3920 62 0004Polyethylene terephthalate film, of a thickness of less than 10 micrometres, for the manufacture of video cassettes with a playing time of 300 minutes at a tape speed of 24 mm per second (a)0ex 3920 62 0009Polyethylene terephthalate film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates (a)0ex 3920 62 0014Polyethylene terephthalate film, of a thickness of 20 micrometres or more but not exceeding 30 micrometres, coated on one side with silicone, for use in the manufacture of window safety-film (a)6,5ex 3920 91 0091Polyvinyl butyral film having a graduated coloured band6ex 4823 90 9012Strips of paper glued to one another to form a honeycomb of a height not exceeding 13 cm, for agricultural purposes (a)0ex 7019 90 1011Non-textile glass fibres in which fibres of a diameter of less than 3,5 micrometres predominate0ex 7410 21 0010Sheet or plate of polytetrafluoroethylene, with aluminium oxide or titanium dioxide as a filler or reinforced with glass-fibre fabric, laminated on both sides with copper foil, or sheet of polyimide, laminated on one side or on both sides with copper foil0ex 8112 99 3010Alloy of niobium (columbium) and titanium, in the form of bars and rods0

TABLE II

ex 2707 99 1110Crude light oils containing by weight:

-10 % or more of vinyltoluenes,

-10 % or more of indene

and

-1 % or more but not more than 5 % of naphthalene0ex 2712 20 0010Synthetic paraffin wax of a molecular weight of 460 or more but not exceeding 15600ex 2804 29 0010Helium0ex 2805 30 1010Alloy of cerium and other rare earth metals, containing by weight 47 % or more of cerium0ex 2810 00 0010Diboron trioxide0ex 2811 19 0010Sulphamidic acid0ex 2811 29 9010Tellurium dioxide0ex 2818 30 0010Aluminium hydroxide oxide in the form of pseudo-boehmite4ex 2819 90 0010Chromium dioxide0ex 2820 90 0010Manganese oxide containing by weight 77 % or more of manganese0ex 2827 60 0010Titanium tetraiodide0ex 2836 91 0020Lithium carbonate, in the form of powder and containing one or more of the following impurities at the concentrations indicated:

-2 mg/kg or more of arsenic

-200 mg/kg or more of calcium

-200 mg/kg or more of chlorides

-20 mg/kg or more of iron

-150 mg/kg or more of magnesium

-20 mg/kg or more of heavy metals

-300 mg/kg or more of potassium

-300 mg/kg or more of sodium

-200 mg/kg or more of sulphates,

determined according to the methods specified in the European Pharmacopoeia02840 11 00

2840 20 10 Borates of sodium, anhydrous0ex 2840 19 0010Disodium tetraborate pentahydrate0ex 2841 80 0010Calcium tungstate (wolframate), for the manufacture of ferro-alloys or decaammonium-41-oxododecawolframate (ammonium paratungstate) (a)0ex 2843 90 9010Carboplatin (INN)02845 10 00Heavy water (deuterium oxide) (Euratom)02845 90 10Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0ex 2902 90 9010Vinyltoluenes0ex 2902 90 9040p-Cymene0ex 2902 90 90601,3-Diisopropylbenzene0ex 2902 90 90701,2,4,5-Tetramethylbenzene (durene)0ex 2903 30 1010Carbon tetrafluoride (tetrafluoromethane)0ex 2903 30 3910Dibromomethane0ex 2903 59 00101,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo[12.2.1.16,9.02,13.05,10]octade-

ca-7,15-diene, for use in the manufacture of polyamide, polyethylene, synthetic rubber or polystyrene (a)0ex 2903 69 0010Di- or tetrachlorotricyclo[8.2.2.24,7]hexadeca-1(12),4,6,10,13, 15-hexaene, mixed

isomers0ex 2904 20 9010Nitromethane0ex 2904 20 9020Nitroethane0ex 2904 20 90301-Nitropropane0ex 2905 19 1010Potassium tert-butoxide0ex 2905 39 9010Butane-1,3-diol0ex 2905 39 90202,4,7,9-Tetramethyldec-5-yne-4,7-diol0ex 2905 50 90102,2-Bis(bromomethyl)propanediol02906 11 00Menthol0ex 2906 19 0010Labd-14-ene-8,13-diol0ex 2907 29 90206,6& prime;,6& Prime;-Tri-tert-butyl-4,4& prime;,4& Prime;-(1-methylpropan-1-yl-3-ylidene)tri-m-cresol, whether or not containing toluene of crystallization0ex 2909 19 00101,2-Bis(2-chloroethoxy)ethane0ex 2909 30 30102-Bromo-6-methoxynaphthalene0ex 2909 30 30201,2-Bis(2,4,6-tribromophenoxy)ethane, for the manufacture of acrylonitrile-butadiene-styrene (ABS) (a)0ex 2909 49 10202-(2-Chloroethoxy)ethanol0ex 2910 90 00302,3-Epoxypropan-1-ol (glycidol)0ex 2910 90 0040Perfluoroepoxypropane0ex 2914 19 00105-Methylhexan-2-one0ex 2914 49 001011a,17,21-Trihydroxy-16v-methylpregna-1,4-diene-3,20-dione0ex 2914 69 00101,4-Naphthoquinone0ex 2914 69 0030Ubidecarenone (INN) (coenzyme Q10)0ex 2915 60 10101-Isopropyl-2,2-dimethyltrimethylene diisobutyrate0ex 2915 90 9020Trimethyl orthoacetate0ex 2916 12 00102-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate0ex 2916 14 00102,3-Epoxypropyl methacrylate0ex 2916 19 9020Butyl perchlorocrotonate0ex 2916 19 9030Crotonic acid0ex 2916 39 0010Methyl 3-chlorobenzoate0ex 2917 13 0010Azelaic acid and sebacic acid0ex 2917 19 9020Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate0ex 2917 19 9030Docusate sodium (INN)0ex 2917 20 00208,9,10-Trinorborn-5-ene-2,3-dicarboxylic anhydride0ex 2917 39 1010Ester or anhydride of tetrabromophthalic acid0ex 2917 39 9010Benzene-1,2,4-tricarboxylic acid0ex 2917 39 9020Benzene-1,2,4-tricarboxylic acid 1,2-anhydride0ex 2917 39 9030Tetrachlorophthalic anhydride0ex 2917 39 9050Benzene-1,2,4-tricarbonyl trichloride0ex 2917 39 9070Sodium 3,5-bis(methoxycarbonyl)benzenesulphonate0ex 2918 19 1010DL-Malic acid0ex 2918 19 90202,2-Bis(hydroxymethyl)propionic acid0ex 2918 19 9030Dinoprost (INN), for the manufacture of human medicaments of heading No 3004 (a)0ex 2918 19 9040Ammonium (3R,5R)-7-[(1S,2S,6R,8S,8aR)-8-(2,2-dimethylbutyryloxy)-

1,2,6,7,8,8a-hexahydro-2,6-dimethyl-1-naphthyl]-3,5-dihydroxyheptanoate3,5ex 2918 19 9050Pravastatin sodium (INNM)3,5ex 2918 90 0010Dinoprostone (INN)0ex 2918 90 0030Alprostadil (INN)0ex 2918 90 00502,6-Dimethoxybenzoic acid0ex 2918 90 0060Trepibutone (INN)0ex 2920 90 1010Diethyl sulphate0ex 2920 90 8010O,O& prime;-Dioctadecyl pentaerythritol bis(phosphite)0ex 2920 90 8030O,O& prime;-Bis(2,4-di-tert-butylphenyl)pentaerythritol bis(phosphite)0ex 2921 19 90201,1,3,3-Tetramethylbutylamine0ex 2921 19 9030Triallylamine0ex 2921 29 0010N,N,N& prime;,N& prime;-Tetrabutylhexamethylenediamine0ex 2921 30 9010Cyclohex-1,3-ylenediamine (1,3-diaminocyclohexane)0ex 2921 49 1010a& prime;,a& prime;,a& prime;-Trifluoro-2,3-xylidine0ex 2921 59 0020m-Phenylenebis(methylamine)0ex 2921 59 00302,2& prime;-Dichloro-4,4& prime;-methylenedianiline0ex 2922 19 0020Dinoprost (INN), trometamol (INN) salt0ex 2922 19 00301-Deoxy-1-(octylamino)-D-glucitol0ex 2922 49 9010Tranexamic acid (INN)0ex 2922 49 9020v-Alanine0ex 2922 50 0020Metipranolol (INN)0ex 2922 50 0060Nadolol (INN)0ex 2924 10 00202-Acrylamido-2-methylpropanesulphonic acid and its sodium or ammonium salts0ex 2924 29 8060Ioversol (INN)0ex 2925 11 0020Saccharin and its sodium salt02925 19 103,3& prime;,4,4& prime;,5,5& prime;,6,6& prime;-Octabromo-N,N& prime;-ethylenediphthalimide0ex 2926 90 90202-(3-Phenoxyphenyl)propiononitrile0ex 2926 90 9030Isophthalonitrile6ex 2926 90 9060Etocrilene (INN)0ex 2926 90 9070Octocrilene (INN)0ex 2926 90 90802-Cyanoacetamide0ex 2926 90 9085Ethyl cyanoacetate0ex 2927 00 00102,2& prime;-Dimethyl-2,2& prime;-azodipropionamidine dihydrochloride0ex 2928 00 0030Robenidine hydrochloride (INNM)0ex 2928 00 0040N,N-Diethylhydroxylamine0ex 2928 00 00503,3& prime;-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N& prime;-bipropionamide0ex 2928 00 00602,4,6-Trichlorophenylhydrazine0ex 2929 10 0020Methylenedicyclohexyl diisocyanate, mixed isomers0ex 2929 10 00503,3& prime;-Dimethylbiphenyl-4,4& prime;-diyl diisocyanate0ex 2929 10 0060m-Isopropenyl-a,a-dimethylbenzyl isocyanate0ex 2929 10 0070m-Phenylenediisopropylidene diisocyanate0ex 2930 90 1010Cilastatin sodium (INNM)0ex 2930 90 80012,2& prime;-Thiodiethyl bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]0ex 2930 90 8004Thiophenol0ex 2930 90 8005Probucol (INN)3,8ex 2930 90 8006Ethoprophos (ISO)0ex 2930 90 8007Netobimin (INN)0ex 2930 90 80093,3-Dimethyl-1-methylthiobutanone oxime0ex 2930 90 8011Thiophanate-methyl (ISO)0ex 2930 90 8013Mixture of isomers consisting of 4-methyl-2,6-bis(methylthio)-m-phenylenediamine and 2-methyl-4,6-bis(methylthio)-m-phenylenediamine0ex 2931 00 90302-Diphenylphosphinobenzoic acid0ex 2932 11 0010Tetrahydrofuran, containing not more than 40 mg per litre in total of tetrahydro-2-methylfuran and tetrahydro-3-methylfuran, for the manufacture of a-4-hydroxybutyl-o-hydroxypoly(oxytetramethylene) (a)0ex 2932 13 0010Tetrahydrofurfuryl alcohol0ex 2932 19 0040Furan of a purity by weight of 99 % or more0ex 2932 29 9010Glucurolactone (INN)0ex 2932 29 90152& prime;-Anilino-6& prime;-[ethyl(isopentyl)amino]-3& prime;-methylspiro[isobenzofuran-1(3H),9& prime;-

xanthen]-3-one0ex 2932 29 90201-Hydroxy-4-[1-(4-hydroxy-3-methoxycarbonyl-1-naphthyl)-3-oxo-1H,3H-

benzo[de]isochromen-1-yl]-6-octadecyloxy-2-naphthoic acid0ex 2932 29 90252& prime;-Chloro-6& prime;-(diethylamino)-3& prime;-methylspiro[isobenzofuran-1(3H),9& prime;-xanthen]-3-

one0ex 2932 29 903013,14,15,16-Tetranorlabdano-12,8a-lactone0ex 2932 29 90352& prime;-Anilino-6& prime;-[ethyl(tetrahydrofurfuryl)amino]-3& prime;-methylspiro[isobenzofuran-

1(3H),9& prime;-xanthen]-3-one0ex 2932 29 90403& prime;-Chloro-6& prime;-cyclohexylaminospiro[isobenzofuran-1(3H),9& prime;-xanthen]-3-one0ex 2932 29 90452& prime;-Anilino-6& prime;-diethylamino-3& prime;-methylspiro[isobenzofuran-1(3H),9& prime;-xanthen]-3-

one0ex 2932 29 90552& prime;-(2-Chloroanilino)-6& prime;-dibutylaminospiro[isobenzofuran-1(3H),9& prime;-xanthen]-3-one0ex 2932 29 90606& prime;-(N-Ethyl-p-toluidino)-2& prime;-methylspiro[isobenzofuran-1(3H),9& prime;-xanthen]-3-one0ex 2932 29 9065Lovastatin (INN)4ex 2932 29 90702& prime;-Anilino-6& prime;-(N-ethyl-p-toluidino)-3& prime;-methylspiro[isobenzofuran-1(3H),9& prime;-

xanthen]-3-one0ex 2932 29 9080Etoposide (INN)0ex 2932 90 7930Glucosamine hydrochloride (INNM)0ex 2932 90 7960(25R)-Spirost-5-en-3v-ol (diosgenin) and its esters0ex 2932 90 7970Bendiocarb (ISO)0ex 2933 21 0010Hydantoin0ex 2933 29 9010Enoximone (INN)0ex 2933 39 8001Carpipramine dihydrochloride (INNM)0ex 2933 39 80062,3,5,6-Tetrachloropyridine0ex 2933 39 80113,6-Dichloropyridine-2-carboxylic acid0ex 2933 39 80122-Hydroxyethylammonium 3,6-dichloropyridine-2-carboxylate0ex 2933 39 8014(RS)-1-[2-(4-Chlorobenzhydryloxy)ethyl]piperidine and its salts0ex 2933 39 80152-Butoxyethyl (3,5,6-trichloro-2-pyridyloxy)acetate0ex 2933 39 80173,5-Dichloro-2,4,6-trifluoropyridine0ex 2933 39 8018Pyridine-2,3-dicarboxylic acid0ex 2933 40 9010Quinapril hydrochloride (INNM)0ex 2933 59 90201,4-Diazabicyclo[2.2.2]octane (triethylenediamine)0ex 2933 59 9030Amprolium hydrochloride (INNM)0ex 2933 59 90701-Ethyl-6-fluoro-1,4-dihydro-4-oxo-7-piperazin-1-yl-1,8-naphthyridine-3-

carboxylic acid and its salts and esters0ex 2933 69 90102,6-Di-tert-butyl-4-[4,6-bis(octylthio)-1,3,5-triazin-2-ylamino]phenol0ex 2933 69 90201,3,5-Tris(4-tert-butyl-3-hydroxy-2,6-dimethylbenzyl)-1,3,5-triazine-

2,4,6(1H,3H,5H)-trione0ex 2933 69 90301,3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1,3,5-triazine-

2,4,6(1H,3H,5H)-trione0ex 2933 79 0020Carteolol hydrochloride (INNM)0ex 2933 90 9011Octrizole (INN)0ex 2933 90 9012Drometrizole (INN)0ex 2933 90 9013(2S)-1-(3-Acetylthio-2-methyl-1-oxopropyl)-L-proline0ex 2933 90 90152,4-Di-tert-butyl-6-(5-chlorobenzotriazol-2-yl)phenol0ex 2933 90 9018Captopril (INN)0ex 2933 90 9019Tryptophan, of a purity by weight not exceeding 98,5 %, for the manufacture of goods of heading No 2309 (a)0ex 2933 90 90232-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol0ex 2933 90 90242-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol0ex 2933 90 9025Bumetrizole (INN)0ex 2933 90 9026Ethacridine lactate (INNM)0ex 2933 90 90272-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol0ex 2933 90 90286,6& prime;-Di-2H-benzotriazol-2-yl-4,4& prime;-bis(1,1,3,3-tetramethylbutyl)-2,2& prime;-methylenediphenol0ex 2934 90 6010Clotiazepam (INN)4ex 2934 90 6030Teniposide (INN)0ex 2934 90 6040Etizolam (INN)4ex 2934 90 6050Tiquizium bromide (INN)0ex 2934 90 7010Ofloxacin (INN)0ex 2934 90 7030Pirenoxine sodium (INNM)0ex 2934 90 9911Zotepine (INN)4ex 2934 90 99131-Ethyl-1,4-dihydro-4-oxo[1,3]dioxolo[4,5-g]cinnoline-3-carbonitrile0ex 2934 90 99142-Chlorodibenz[bf][1,4]oxazepin-11(10H)-one0ex 2934 90 9916 (6R,7R)-3-Acetoxymethyl-7-[(R)-2-formyloxy-2-phenylacetamido]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid and its salts and esters0ex 2934 90 9919Adenosine phosphate (INN)0ex 2934 90 9931p-Methoxybenzyl 3-chloromethyl-7-(2-phenylacetamido)-3-cephem-4-carboxylate0ex 2934 90 99

ex 3004 90 9934

15 2& prime;,3& prime;-Dideoxyinosine0ex 2935 00 0030Sulfathiazole (INN) and its salts0ex 2935 00 00503-[1-(7-Hexadecane-1-sulphonamidoindol-3-yl)-3-oxo-1H,3H-benz[de]isochro-

men-1-yl]indole-7-carboxylic acid0ex 2935 00 0060Sulfadimethoxine (INN) and its sodium salt3,3ex 2936 24 0010Dexpanthenol (INN)0ex 2936 29 1010Folic acid (INN)0ex 2937 10 9010Protirelin tartrate (INNM)0ex 2937 29 9010Methylprednisolone (INN) and its salts and esters0ex 2937 29 9020Mometasone furoate (INNM)0ex 2937 29 9030Alclometasone 17,21-dipropionate (INNM)0ex 2937 99 0010Calcitonin (INN) (porcine)0ex 2937 99 0020Calcitonin (INN) (salmon), and its salts0ex 2937 99 0030Des-1-alanine-[125-serine] interleukin-2 (human)02939 30 00Caffeine and its salts4,1ex 2940 00 9030Ribose0ex 2941 10 00

ex 3004 10 1020

10 Piperacillin sodium (INNM)3,6ex 2941 10 0030Piperacillin (INN)4,1ex 2941 50 0010Clarithromycin (INN)2,7ex 2941 90 0001Cefaclor (INN) and its hydrates, salts and esters0ex 2941 90 00

ex 3004 20 9002

10 Amikacin (INN) and its salts0ex 2941 90 0004Clindamycin (INN) and its salts and esters0ex 2941 90 0005Lincomycin (INN) and its salts and esters, for the manufacture of medicaments of heading No 3003 or 3004 (a)0ex 2941 90 0006Tobramycin (INN) and its salts0ex 2941 90 0008Monensin (INN) and its salts0ex 2941 90 0009Spectinomycin dihydrochloride (INNM), pentahydrate0ex 2941 90 0013Midecamycin (INN) and its acetates2,7ex 2941 90 0014Cefoxitin sodium (INNM)0ex 2941 90 0015Cefradine (INN)0ex 2941 90 0016Kitasamycin (INN) and its tartrate0ex 2941 90 0019Josamycin (INN)2,7ex 2941 90 0020Josamycin propionate (INNM)2,7ex 2941 90 00

ex 3004 20 9021

30 Mitomycin (INN)0ex 2941 90 00

ex 3004 20 9023

20 Bleomycin sulphate (INNM)0ex 2941 90 0024Dibekacin sulphate (INNM)0ex 2941 90 0026Spectinomycin sulphate (INNM)0ex 2941 90 0027Netilmycin sulphate (INNM)0ex 2941 90 0028Ribostamycin sulphate (INNM)0ex 2941 90 0029Neomycin sulphate (INNM)0ex 2941 90 0031Aztreonam (INN)0ex 2941 90 0032Imipenem (INN)0ex 2941 90 0033Cefotetan (INN)0ex 2941 90 0034Ceftizoxime sodium (INNM)0ex 2941 90 0035Kanamycin sulphate (INNM)0ex 2941 90 0036Cefotiam dihydrochloride (INNM)0ex 2941 90 0037Cefmenoxime hemihydrochloride (INNM)0ex 2941 90 00

ex 3004 20 9038

50 Vancomycin (INN) and its salts and esters0ex 2941 90 0039Cefixime (INN)0ex 2941 90 0043Ceftibuten (INN)0ex 3002 10 1010Tetanus-immunoglobulin0ex 3002 10 1020Anti-tetanus immunoplasma0ex 3002 10 1060Rabies immunoplasma0ex 3002 10 9110Anti-haemophilic globulin and anti-Rho(D)-globulin derived from human blood0ex 3002 10 9120Gamma globulin, in solution, derived from human blood0ex 3002 10 9130Lyophilized gamma globulin derived from human blood0ex 3002 10 9910Unsterile blood serum obtained from the blood of a bovine foetus or non-immunized newly born calf0ex 3003 10 0010Mixture of piperacillin (INN) and tazobactam (INN)3,2ex 3003 40 0010Granules containing by weight 40 % or more but not more than 50 % of theophylline0ex 3003 90 9010Granules containing by weight 0,7 % or more but not more than 1,2 % of glycerol trinitrate0ex 3004 39 9010Preparation containing des-1-alanine-(125-serine) interleukin-2 (human), obtained from genetically-manipulated Escherichia coli0ex 3004 90 1910Purified collagen dispersed in a phospate physiological saline solution, whether or not containing lidocaine (INN)3ex 3005 10 0010Self-adhesive plastic film, coated or covered on one side with glycerol trinitrate mixed with an acrylic adhesive, containing 4 mg/cm2 or more of glycerol trinitrate, protected by a release sheet, not put up in forms or packings for retail sale03201 20 00Tanning extracts of wattle (mimosa)0ex 3201 90 9010Tanning extracts of eucalyptus3,2ex 3201 90 9020Tanning extracts derived from gambier and myrobalan fruits0ex 3206 49 9010Black preparation of iron-oxide pigments, in liquid form, with a maximum particle-size not exceeding 20 nanometres and containing by weight 25 % or more of iron evaluated as Fe2O3, for the manufacture of goods of heading No 3304 or 9608 (a)0ex 3207 40 9020Glass, in the form of powder or granules, containing by weight 99 % or more of silicon dioxide0ex 3208 90 10

ex 3909 50 0010

10 Polyurethane of 2,2& prime;-(tert-butylimino)diethanol and 4,4& prime;-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide containing by weight 48 % or more of polymer0ex 3402 11 0010Aqueous solution containing by weight 30 % or more but not more than 50 % of disodium alkyl [oxydi(benzenesulphonate)]0ex 3402 90 1020Mixture of docusate sodium (INN) and sodium benzoate0ex 3504 00 0010Purified antigens obtained from genetically-manipulated yeast-cells, for the manufacture of detection-tests for hepatitis-C (a)0ex 3505 10 5020O-(2-Hydroxyethyl) derivative of hydrolysed waxy maize-starch0ex 3507 90 0010Bromelains (INN)0ex 3507 90 0040Lipoprotein lipase0ex 3507 90 0050Serrapeptase (INN)0ex 3507 90 0060Aspergillus alkaline protease0ex 3507 90 0070Enzymatic preparation based on thermolysine0ex 3701 99 0010Plate of quartz or of glass, covered with a film of chromium and coated with a photo-sensitive or electron-sensitive resin, for the manufacture of masks for integrated circuits (a)0ex 3702 31 9010Colour negative film:

-of a width of 75 mm or more but not exceeding 105 mm

and

-of a length of 100 m or more,

for the manufacture of instant-picture film-packs (a)03805 10 90Sulphate turpentine03805 20 00Pine oil1,7ex 3806 90 0020Hydroabietyl alcohol0ex 3809 91 0010Mixture of (5-ethyl-2-methyl-2-oxo-1,3,2l5-dioxaphosphoran-5-ylmethyl) methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2l5-dioxaphosphoran-

5-ylmethyl) methylphosphonate0ex 3811 21 0010Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils0ex 3812 20 0010Reaction mixture containing benzyl 3-isobutyryloxy-1-isopropyl-2,2-dimethylpropyl phthalate and benzyl 3-isobutyryloxy-2,2,4-trimethylpentyl phthalate0ex 3812 30 8010Tetraaluminium nonamagnesium dicarbonate hexacosahydroxide heptahydrate, coated with a surface active agent0ex 3815 12 0010Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not exceeding 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 20 % of silver0ex 3815 19 0001Catalyst, in the form of grains of which 90 % or more by weight have a particle size not exceeding 10 micrometres, consisting of a mixture of oxides on a magnesium silicate support, containing by weight:

-20 % or more but not more than 35 % of copper

and

-2 % or more but not more than 3 % of bismuth,

and of an apparent specific gravity of 0,2 or more but not exceeding 1,00ex 3815 19 0003Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a silicon dioxide support, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more0ex 3815 19 0011Catalyst consisting of chromium oxides and titanium dioxide fixed on a support of silicon dioxide, aluminium oxide or aluminium phosphate0ex 3815 19 0013Catalyst consisting of titanium tetrachloride supported on magnesium dichloride, in the form of a suspension in mineral oil, for use in the manufacture of polypropylene (a)0ex 3815 19 0014Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not exceeding 9 mm, consisting of a mixture of oxides of molybdenum, tungsten, vanadium, copper and strontium, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid (a)0ex 3815 19 0015Catalyst consisting of organo-metallic compounds of titanium, magnesium and aluminium on a support of silicon dioxide, in the form of a suspension in tetrahydrofuran0ex 3815 90 0015Catalyst, in the form of rodlets of a diameter of 4 mm or more but not exceeding 6 mm, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, vanadium, nickel and antimony, for use in the manufacture of acrylic acid (a)0ex 3815 90 0020Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:

-20 % or more but not more than 30 % of titanium

and

-55 % or more but not more than 72 % of chlorine0ex 3815 90 0025Catalyst, in the form of rodlets of a diameter of 4 mm or more but not exceeding 6 mm, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, bismuth, nickel, iron and silicon, for use in the manufacture of acrylaldehyde (a)0ex 3815 90 0035Catalyst, in the form of a suspension in oil, consisting of titanium trichloride and aluminium trichloride, containing by weight (on an oil-free basis):

-15 % or more but not more than 30 % of titanium

and

-40 % or more but not more than 72 % of chlorine0ex 3815 90 0040Catalyst consisting of ethyltriphenylphosphonium acetate in the form of a solution in methanol0ex 3815 90 0060Catalyst, in the form of pellets, consisting of mixed vanadium and phosphorus oxides, containing by weight not more than 0,5 % of one of the following elements: lithium, potassium, sodium, cadmium or zinc, for use in the manufacture of maleic anhydride from butane (a)0ex 3815 90 0070Catalyst containing titanium trichloride, in the form of a suspension in hexane containing by weight, in the hexane-free material, 14 % or more but not more than 25 % of titanium0ex 3815 90 0080Catalyst, in the form of rodlets, consisting of an acid aluminosilicate (zeolite):

-with a mole ratio of silicon dioxide : dialuminium trioxide of not less than 500 : 1 and

-containing by weight 0,2 % or more but not more than 0,8 % of platinum0ex 3822 00 0010Lyophilized extract of the blood cells of Limulus polyphemus (Limulus amoebocyte lysate)0ex 3823 90 2010Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets0ex 3823 90 9101Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Streptomyces tenebrarius, whether or not dried, for use in the manufacture of human medicaments of No 3004 (a)0ex 3823 90 9102Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora purpurea, whether or not dried0ex 3823 90 9103Cholic acid and 3a,12a-dihydroxy-5v-cholan-24-oic acid (deoxycholic acid), crude0ex 3823 90 9104Products obtained by the N-ethylation of sisomycin (INN)0ex 3823 90 9105Intermediate products from the manufacture of monensin salts0ex 3823 90 9106Crude bile acids0ex 3823 90 9115Residues of manufacture containing by weight 40 % or more of 11v,17,20,21-tetrahydroxy-6-methylpregna-1,4-dien-3-one-21-acetate0ex 3823 90 91164-(2-Aminoethylthiomethyl)-1,3-thiazol-2-ylmethyldimethylamine, in the form of a solution in toluene0ex 3823 90 9808Colloidal diantimony pentaoxide0ex 3823 90 9813Mixture of nitromethane and 1,2-epoxybutane0ex 3823 90 9817Tetrakis(2-chloroethyl)ethylene bis(phosphate), not chemically defined5ex 3823 90 9818Grains, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight:

-70 % or more but not more than 78 % of dialuminium trioxide

and

-19 % or more but not more than 26 % of zirconium dioxide5,2ex 3823 90 9819Grains, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight:

-54 % or more but not more than 62 % of dialuminium trioxide

and

-36 % or more but not more than 44 % of zirconium dioxide5,2ex 3823 90 9821Crude lithium hypochlorite0ex 3823 90 9823Mixture of 2-(perfluoroalkyl)ethanethiols of a perfluoroalkyl chain-length of 6 or more carbon atoms but not exceeding 20 carbon atoms0ex 3823 90 9825Mixed oxides of barium, bismuth, lead and titanium, in the form of powder, containing by weight:

-5 % or more of barium

and

-15 % or more of titanium,

for use as dielectric materials in the manufacture of multilayer ceramic capacitors (a)0ex 3823 90 9826Lithium niobate wafers, undoped0ex 3823 90 9827Preparation, in the form of powder, containing by weight 75 % or more of zinc bis[3,5-bis(1-phenylethyl)salicylate]0ex 3823 90 9831Film consisting of the oxides of barium, calcium and either titanium or zirconium, mixed with binding materials0ex 3823 90 9832Mixture of amines derived from dimerized fatty acids, of an average molecular weight of 520 or more but not exceeding 5500ex 3823 90 9834Preparation consisting essentially of alkaline asphalt sulphonate, of:

-a specific gravity of 0,9 or more but not exceeding 1,5

and

-a solubility in water of 70 % by weight or more0ex 3823 90 9835Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:

-on a support of mineral wax, whether or not modified chemically,

or

-in the form of a solution in an organic solvent0ex 3823 90 9836Mixture of lithium diisopropylamide (lithium salt of diisopropylamine) and magnesium bis(diisopropylamide) (magnesium salt of diisopropylamine), in the form of a solution in organic solvents0ex 3823 90 9837Calcined bauxite (refractory grade)0ex 3823 90 9838Magnetisable iron oxide, in the form of powder, containing by weight:

-30 % or more but not more than 38 % of bivalent iron in relation to the total iron

and

-1 % or more but not more than 4 % of cobalt0ex 3823 90 9839Spent catalyst, in the form of rodlets of diameter of 1 mm or more but not exceeding 3 mm, containing a mixture of sulphides of tungsten and of nickel on a support of zeolite, containing by weight not more than 10 % of tungsten and not more than 10 % of nickel, for regeneration as a catalyst for hydrocarbon-cracking (a)0ex 3823 90 9840Mixture containing by weight:

-7 % or more but not more than 9 % of 2-methyl-1,3-phenylene diisocyanate,

-31 % or more but not more than 34 % of 4-methyl-1,3-phenylene diisocyanate,

-10 % or more but not more than 13 % of 2,4& prime;-methylenediphenyl diisocyanate,

-46 % or more but not more than 49 % of 4,4& prime;-methylenediphenyl diisocyanate0ex 3823 90 98423-(1-Ethyl-1-methylpropyl)isoxazol-5-ylamine, in the form of a solution in toluene0ex 3823 90 9843Mixture of magnesium bromide 2-oxoperhydroazepin-1-ide and epsilon-caprolactam0ex 3823 90 9844Mixture of disodium N-benzyloxycarbonyl-L-aspartate and sodium chloride, in the form of a solution in water0ex 3823 90 9845Disodium 9,10-dihydro-9,10-dioxoanthracene-2,7-disulphonate, containing by weight 10 % or more but not more than 20 % of sodium sulphate0ex 3823 90 9848Eutectic alloy wholly of potassium and sodium, containing by weight 77 % or more but not more than 79 % of potassium0ex 3823 90 9849Blend of terephthaloyl dichloride and isophthaloyl dichloride0ex 3901 20 0020Polyethylene, containing by weight 35 % or more but not more than 45 % of mica0ex 3901 20 0040Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,958 or more at 23 °C, containing:

-50 mg/kg or less of aluminium,

-2 mg/kg or less of calcium,

-2 mg/kg or less of chromium,

-2 mg/kg or less of iron,

-2 mg/kg or less of nickel,

-2 mg/kg or less of titanium

and

-8 mg/kg or less of vanadium,

for the manufacture of chlorosulphonated polyethylene (a)0ex 3901 90 0093Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid0ex 3902 90 0096Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10 % or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10 % or less of polyethylene and/or 25 % or less of polypropylene, in one of the forms mentioned in note 6 (b) to Chapter 390ex 3903 90 0010Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175 or more0ex 3903 90 0030Brominated polystyrene, containing by weight 58 % or more but not more than 71 % of bromine, in one of the forms mentioned in note 6 (b) to Chapter 390ex 3903 90 0040Copolymer of styrene with 2-ethylhexyl acrylate or with n-butyl acrylate, containing:

-10 mole % or more but not more than 16 mole % of acrylate,

-0,2 mg/kg or less of sodium

and

-0,1 mg/kg or less of calcium0ex 3903 90 00

ex 3905 19 0050

20Block copolymer of styrene and vinyl acetate, containing by weight 5 % or more but not more than 55 % of vinyl acetate0ex 3904 40 0091Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:

-87 % or more but not more than 92 % of vinyl chloride,

-2 % or more but not more than 9 % of vinyl acetate

and

-1 % or more but not more than 8 % of vinyl alcohol,

in one of the forms mentioned in note 6 (a) or (b) to Chapter 390ex 3904 50 0091Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4 micrometres or more but not more than 20 micrometres0ex 3904 50 0092Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5 % or more of vinylidene chloride, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip (a)0ex 3904 69 0091Copolymer of ethylene with chlorotrifluoroethylene and hexafluoro(2-methylpropene), in one of the forms mentioned in note 6 (b) to Chapter 390ex 3904 69 0093Polyvinyl fluoride, in one of the forms mentioned in note 6 (b) to Chapter 390ex 3904 69 0095Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 390ex 3905 90 0093Poly(vinyl formal), in one of the forms mentioned in note 6 (b) to Chapter 39, of a molecular weight of 10 000 or more but not exceeding 40 000 and containing by weight:

-9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate

and

-5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol0ex 3906 10 0010Polymethyl methacrylate, in the form of expansible beads containing 2-methylpentane as blowing agent0ex 3906 90 0010Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]0ex 3906 90 0020Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide containing by weight 55 % or more of copolymer0ex 3906 90 0030Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10 % or more but not more than 11 % of 2-ethylhexyl acrylate0ex 3906 90 0040Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)0ex 3906 90 0050Polymerization product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes (a)0ex 3906 90 0060Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, whether or not compounded with silica5ex 3906 90 0070Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a thickener in textile pigment printing pastes or in the manufacture of medicaments of heading No 3003 or 3004 (a)0ex 3906 90 0080Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 (a)6ex 3907 20 9020Poly(oxypropylene) having alkoxysilyl end-groups0ex 3907 20 9040Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight of more than 26 000, in one of the forms mentioned in note 6 (b) to Chapter 390ex 3907 20 9070Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0ex 3907 20 9080Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide0ex 3907 91 9010Diallyl phthalate prepolymer0ex 3907 99 0030Poly(oxy-1,4-phenylenecarbonyl), in the form of powder0ex 3908 90 0010Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 390ex 3909 40 0010Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 micrometres0ex 3911 90 1020Polyfurfuryl alcohol0ex 3912 11 0010Non-plasticized cellulose triacetate, in the form of flakes, for the manufacture of cellulose triacetate yarn (a)0ex 3912 39 1010Ethylcellulose, not plasticized0ex 3912 39 9010Cellulose, both hydroxyethylated and ethylated, insoluble in water0ex 3912 39 9020Hydroxypropylcellulose0ex 3912 39 9040Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms 0ex 3912 90 1020Cellaburate (INN), non-plasticized, in the form of powder:

-with a butyryl content by weight of 25 % or more, as determined by the ASTM D 817-72 method

and

-of a viscosity not exceeding 57 poise, as determined by the ASTM D 817-72 method,

for use as a binding agent in the manufacture of paints or lacquers for cars and aircraft, or for the manufacture of heat-transfer printing inks (a)0ex 3914 00 0020Colestipol hydrochloride (INNM)0ex 3915 90 93

ex 3915 90 9910

10 Waste and scrap of photographic (including cinematographic) and X-ray film0ex 3919 90 31

ex 3920 62 00

ex 3921 90 1910

11

70 Reflecting laminated sheeting, metallized, consisting of one sheet of polyester and at least another sheet of polyester or other plastic material and coated on one side with an adhesive, whether or not protected by a release sheet0ex 3919 90 5092Polyvinyl chloride sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded hollow glass balls of a diameter not exceeding 100 micrometres0ex 3920 10 1192Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photo-resist film used in the manufacture of semiconductors or printed circuits (a)0ex 3920 10 19

ex 3920 10 90

ex 3920 99 5092

92

33 Film, of a thickness not exceeding 1 mm, of a copolymer of vinyl alcohol with ethylene, containing no other polymerization products or copolymerization products, with an extension at break (longitudinal or transversal) of 65 % or more0ex 3920 10 9093Synthetic paper pulp, in the form of moist sheets, made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing polyvinyl alcohol dissolved in water as the moistening agent0ex 3920 10 9095Film of a thickness not exceeding 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber (a)0ex 3920 20 9091Synthetic paper pulp, in the form of moist sheets, made from unconnected finely branched polypropylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing polyvinyl alcohol dissolved in water as the moistening agent0ex 3920 30 00

ex 3921 90 6020

27 Laminated sheet or strip, consisting of a film of a thickness of 100 micrometres or more but not exceeding 200 micrometres, composed of a blend of a thermoplastic elastomer (TPE) of styrene-butadiene-styrene (SBS) with polyethylene or polypropylene, coated or covered on both sides with a film of polypropylene of a thickness not exceeding 20 micrometres0ex 3920 42 11

ex 3920 42 9192

92 Reflecting sheeting, consisting solely of a single layer of polyvinyl chloride, wholly embossed on one side in a regular pyramidal pattern0ex 3920 42 9193Sheeting of polyvinyl chloride, stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 micrometres or more but not exceeding 80 micrometres, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of polyvinyl chloride0ex 3920 59 0010Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres0ex 3920 62 0003Polyethylene terephthalate film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks (floppy disks) (a)0ex 3920 62 00

ex 3920 63 00

ex 3921 90 1907

50

20 Polyester film of a thickness not exceeding 70 micrometres, coated on one side with a substance which becomes coloured in the presence of salicyclic acid at a temperature not exceeding 100 °C0ex 3920 69 00

ex 3921 90 1940

15 Iridescent film of polyester and polymethyl methacrylate0ex 3920 69 0050Polycondensation product of terephthalic acid with a mixture of cyclohex-1,4-ylenedimethanol and ethane-1,2-diol, in the form of a film0ex 3920 69 0070Film of a copolymer of ethane-1,2-diol and naphthalene-2,6-dicarboxylic acid, of a thickness of less than 10 micrometres, for the manufacture of video-cassettes with a playing-time of 300 minutes at a tape-speed of 24 mm per second (a)0ex 3920 92 0010Film consisting of poly(epsilon-caprolactam) blended with:

-either 10 % or less by weight of polyethylene

-or 10 % or less by weight of ethylene-vinyl acetate copolymer0ex 3920 92 0021Poly(epsilon-caprolactam) film:

-of a softening point of 200 °C or more

and

-containing 130 mg/kg or more but not more than 170 mg/kg of copper,

for use during the bonding together, under heat and vacuum, of components of composite articles (a)0ex 3920 99 1910

ex 3921 90 5020 Polyimide sheet and strip, uncoated, or coated or covered solely with plastic0ex 3920 99 5021Polyvinyl fluoride sheet0ex 3920 99 50

ex 3921 90 6022

25 Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells (a)0ex 3920 99 5023Biaxially-orientated polyvinyl alcohol film, containing by weight 97 % or more of polyvinyl alcohol, uncoated, of a thickness not exceeding 1 mm0ex 3920 99 5024Film entirely of polyvinyl alcohol, of a thickness not exceeding 1 mm and containing by weight:

-2 % or less of unhydrolysed acetate groups evaluated as vinyl acetate

and

-5 % or more but not more than 25 % of glycerol as plasticizer,

for the manufacture of roof-windows (a)0ex 3920 99 5026Poly(1-chlorotrifluoroethylene) film0ex 3920 99 5027Film of a mixture of polyvinylidene fluoride with an acrylic polymer, of a thickness of 40 micrometres or more but not exceeding 60 micrometres0ex 3920 99 5028Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12 micrometres or more but not exceeding 400 micrometres0ex 3920 99 50

ex 3921 90 6032

22 Sheet of a thickness of 1 mm or more but not exceeding 3 mm, consisting of a copolymer of ethylene with chlorotrifluoroethylene, whether or not backed with a woven glass-fibre fabric0ex 3920 99 5036Film entirely of polyvinyl alcohol, of a thickness not exceeding 1 mm and of a width of 2,20 m or more, with an extension at break, in the transverse direction, of 350 % or more0ex 3920 99 5037Biaxially-oriented film of polyvinyl alcohol, coated on both sides, of a total thickness of less than 1 mm0ex 3920 99 50

ex 3921 90 6038

29 Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer0ex 3921 90 6028Translucent laminated sheet consisting of a polyester film coated on one surface with metal and metal oxides, and covered on both sides with a film of polyvinyl butyral0ex 3926 90 9120Reflecting sheeting or tape, consisting of a facing strip of polyvinyl chloride embossed in a regular pyramidal pattern, heat sealed in parallel lines or a grid pattern to a backing strip of plastic material, or of knitted or woven fabric covered on one side with plastic material0ex 4104 10 91

ex 4104 21 0010

10 Leather of East India kip, whole, whether or not the heads and legs have been removed, each of a net weight exceeding 4,5 kg but not exceeding 8 kg, not further prepared than vegetable-tanned, whether or not having undergone certain treatments, but obviously unsuitable for immediate use for the manufacture of leather articles04105 11 91

4105 11 99

4105 12 10

4105 12 90

4105 19 10

4105 19 90 Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4108 or 410904106 11 90

4106 12 00

4106 19 00 Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4108 or 410904107 10 10

4107 29 10

4107 90 10 Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading No 4108 or 41090ex 4416 00 9010Used casks and barrels of oak, whether assembled or not; their staves and heads04501 10 00Natural cork, raw or simply prepared0ex 4811 21 0010Impregnated paper coated or covered with a pressure-sensitive self-adhesive layer, the whole:

-of a tensile of 2 700 N/m or more but not exceeding 3 700 N/m in the machine direction (as determined by the DIN 53112 method),

-of a stretch factor of 1,5 % or more but not exceeding 3,0 % in the machine direction (as determined by the DIN 53112 method)

and

-of adhesivity on stainless steel (as determined by the DIN 30646 method) of 50 N/m or more but not exceeding 225 N/m, at a temperature of 23 °C (±3 °C) and a relative humidity of 50 % (±5 %)05002 00 00Raw silk (not thrown)0ex 5004 00 10

ex 5004 00 9010

10 Yarn spun entirely from silk, not put up for retail sale2,5ex 5005 00 10

ex 5005 00 9010

10 Yarn spun entirely from silk waste (noil), not put up for retail sale0ex 5306 10 11

ex 5306 10 3110

10 Unbleached flax yarn (other than tow yarn) measuring 333,3 decitex or more (not exceeding 30 metric number), for the manufacture of multiple or cabled yarn of the footwear industry or for whipping cables (a)1,8ex 5402 39 1010Texturized yarn of polypropylene, impregnated with silicone-based water-repellant0ex 5402 41 1010Polyamide yarn, not textured, untwisted or with a twist not exceeding 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) with a copolyamide, for the manufacture of:

-knee-length stockings of subheadings 6115 20 11 and 6115 93 30,

-women's stockings of subheadings 6115 20 19 and 6115 93 91,

or

-panty hose (tights) of subheading 6115 11 00

(a)0ex 5402 41 30

ex 5402 41 9010

10 Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalicacid0ex 5402 49 99

ex 5402 69 9010

20 Yarn of polytetrafluoroethylene0ex 5402 49 9930Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (a)0ex 5402 49 99

ex 5402 59 90

ex 5402 69 9050

20

40 Non-textured filament yarn of polyvinyl alcohol, for the manufacture of sleeves for printing rollers (a)0ex 5402 49 99

ex 5402 69 9060

10 Yarn wholly of polyglycollic acid0ex 5402 49 9970Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not exceeding 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (a)0ex 5404 10 9010Monofilament of polytetrafluoroethylene0ex 5404 10 9020Monofilament of poly(1,4-dioxanone)0ex 5404 10 9030Monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures (a)0ex 5404 90 9010Strip of polytetrafluoroethylene, with an extension at break not exceeding 25 %0ex 5407 71 0010Woven fabrics of polyvinyl alcohol fibres, for machine embroidery0ex 5407 71 00

ex 5903 90 9920

10 Woven polytetrafluoroethylene fibre fabric, coated or covered on one side with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side chains ending in carboxylic acid or sulphonic acid groups in the potassium or sodium salt form, whether or not coated on the same side with a metallic inorganic compound0ex 5503 10 1910Textile fibres exclusively of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid, for uses other than the manufacture of goods of Chapters 60 to 65 or of materials used in the manufacture of such goods (a)0ex 5503 10 1930Textile fibres containing by weight:

-1 % or more but not more than 15 % of fibres of poly(p-phenylene terephthalamide)

and

-85 % or more of fibres of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid5ex 5503 90 10

ex 5503 90 9010

30 Acetalized, multicomponent spun fibres with a matrix fibril structure, consisting of emulsion-polymerized polyvinyl alcohol and polyvinyl chloride0ex 5503 90 9010Textile fibres of polytetrafluoroethylene0c inEij>ex 5503 90 90

ex 5601 30 0020

10 Polyvinyl alcohol fibres, whether or not acetalized0ex 5503 90 9040Fibres wholly of poly(thio-1,4-phenylene)0ex 5504 10 0010Fibres entirely of modal (ISO)0ex 5603 00 10

ex 5603 00 91

ex 5603 00 9310

10

10 Polyvinyl alcohol nonwovens, in the piece or cut into rectangles:

-of a thickness of 200 micrometres or more but not exceeding 280 micrometres

and

-of a weight of 20 I/m2 or more but not exceeding 50 g/m20ex 5603 00 10

ex 5603 00 93

ex 5603 00 95

ex 5603 00 9920

30

30

10 Nonwovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0ex 5603 00 93

ex 5603 00 9540

10 Nonwovens of polypropylene consisting of a melt-blown central layer, laminated on each side with spun-bonded fibres, of a thickness not exceeding 550 micrometres and of a weight not exceeding 80 g/m2, in the piece or simply cut into rectangular shape, not impregnated0ex 5903 10 90

ex 5903 20 90

ex 5903 90 9910

10

20 Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres0ex 5907 00 0010Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding 75 micrometres, of a weight not exceeding 550 g/m20ex 5911 10 0010Needle-punched synthetic fibre felts on a woven synthetic fibre base not containing polyester, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products (a)0ex 5911 90 9010Yarn and strip of impregnated polytetrafluoroethylene, whether or not oiled or graphited06305 10 10Sacks and bags, of a kind used for the packing of goods, used, of jute or of other textile bast fibres of heading No 53030ex 6305 90 0010

91

93 Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal0ex 6815 99 9010Microspheres:

-of a diameter of less than 100 micrometres,

-of a refractive index of 2,1 or more but not exceeding 2,4

and

-containing by weight more than 90 % of barium and titanium evaluated as barium oxide and titanium dioxide0ex 6903 20 9010Yarn of continuous ceramic filaments, each filament containing by weight:

-12 % or more of diboron trioxide,

-26 % or less of silicon dioxide

and

-60 % or more of dialuminium trioxide0ex 6909 19 0020Plate, of dialuminium trioxide and titanium carbide, of dimensions not exceeding 48×48 mm, or of a diameter not exceeding 125 mm, for the manufacture of magnetic heads (a)0ex 6909 19 0030Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume not exceeding 65 000 ml, having, per 100 mm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end0ex 7011 20 0010Glass envelopes for monochrome cathode-ray tubes:

-of a diagonal screen measurement of 3,8 cm or more but not exceeding 51 cm,

and

-of a nominal neck-diameter of 13 mm, 20 mm, 29 mm or 37 mm0ex 7019 10 5910Yarn of 33 tex or a multiple thereof, ±7,5 %, obtained from continuous spun glass filaments of a nominal diameter of 3,5 micrometres or of 4,5 micrometres, in which filaments of a diameter of 3 micrometres or more but not exceeding 5,2 micrometres predominate, other than those treated so as to improve their adhesion to elastomers0ex 7019 10 5930Yarn of 22 tex ±7,5 %, obtained from continuous spun glass filaments of a nominal diameter of 5 micrometres, in which filaments of a diameter of 4,2 micrometres or more but not exceeding 5,8 micrometres predominate0ex 7019 10 5940Yarn of 33, 34 or 51 tex or a multiple thereof, ±7,5 %, obtained from continuous spun glass filaments of a nominal diameter of 6 micrometres, in which filaments of a diameter of 5,1 micrometres or more but not exceeding 6,9 micrometres predominate0ex 7019 32 00

ex 7019 39 0010

10 Non-woven product of non-textile glass fibre, for the manufacture of air-filters or of air-filtration products (a)07602 00 19Waste of aluminium, other (including factory rejects)0ex 8103 90 1010Wire of unalloyed tantalum, of a diameter of 0,2 mm or more but not exceeding 0,5 mm, for the manufacture of capacitors (a)0ex 8103 90 9010Tube solely of tantalum, or solely of an alloy of tantalum with tungsten containing by weight 2,5 % or less of tungsten0ex 8104 90 1010Ground and polished magnesium sheets, of dimensions not exceeding 1 500×2 000 mm, coated on one side with an epoxy resin insensitive to light0ex 8108 10 1010Titanium sponge08108 10 90Waste and scrap titanium0ex 8111 00 1110Electrolytic manganese of a purity by weight of 99,7 % or more, for the chemical industry (a)0ex 8419 89 8010Immersion tube (coils) bundles, consisting of an assembly of plastic tubes terminating at each end in a honeycomb structure (end-fitting) surrounded by a pipe connector0ex 8421 99 0091Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder0ex 8421 99 00

ex 5911 90 9092

30 Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness not exceeding 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0ex 8421 99 0093Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not exceeding 3 700 mm and a diameter not exceeding 500 mm0ex 8439 99 10

ex 8439 99 9010

10 Suction roll shells, not drilled, in the form of alloy steel tubes, of a length of 5 207 mm or more and an external diameter of 754 mm or more, for use in machinery for making paper or paperboard (a)0(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.